1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD-shrink not burning

Discussion in 'DVD Shrink forum' started by robpardee, Apr 10, 2007.

  1. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    I have had trouble with several movies now that I shouldn't have any trouble with. I successfuly can analyze and encode my movies but when it comes to the burning part it will say checking disc then "Phase:write in" and my burner freezes and it won't respond until I unplug it and plug it back in then shrink says that it couldn't burn the movie and has been doing this for some time now. I have nero and have had no real trouble burning until just yesterday when this started. I just can't get it to write anything to a disc, it just keeps freezing on me. HELP!!!!
    P.S. I have tried restarting, reinstalling shrink and redoing the whole disc again and nothing yet.
     
  2. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    hello,

    i assume you are autoburning with nero, right?

    If you post a burn log that would help us help you

    You can find it here program files/nero/nero/core
    look for the nerohistory.txt file
    dont forget to edit your serial number out.
     
  3. zippyd

    zippyd Active member

    Joined:
    Aug 4, 2004
    Messages:
    1,302
    Likes Received:
    0
    Trophy Points:
    66
    Just to clarify....

    DVD Shrink cannot burn disks all by itself. There is no burning engine in the program. It can recognize three programs and start them to do the burn.
    They are:
    CopytoDVD
    DVD Decrypter
    Nero

    Since Shrink can't burn, then there's a problem with whichever burn program that you are using.
     
  4. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    I found a nerohistory.log file. I am using nero and I have had this problem a long time ago but it hadn't done it in a long time until now. Here is what the last log says:
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 8/8/2006 11:20:04 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
    Nero API version: 6.6.0.16
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 16b

    Recorder: <HP DVD Writer 840e> Version: 68JH - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : QSI CDRW/DVD SBW242C atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    QSI CDRW/DVD SBW242C D: CDRom0
    HP DVD Writer 840e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 445MB (456176kB)
    Free physical memory: 107MB (109664kB)
    Memory in use : 75
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.4.2007
    NeroAPI
    10:02:19 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    10:02:19 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    10:02:19 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    10:02:21 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    10:02:21 PM #5 Text 0 File Writer.cpp, Line 122
    Writer HP DVD Writer 840e running

    10:02:21 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    10:02:21 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    10:02:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    10:02:21 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    10:02:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2227775 (495:03.50, 4351MB)

    10:02:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    10:02:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HP DVD Writer 840e, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    10:02:21 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:02:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2227776 (2227776) = #2227776/495:3.51
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227776 blocks [HP DVD Writer 840e]
    --------------------------------------------------------------

    10:02:21 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HP DVD Writer 840e] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562485248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2227776 | lead-out | 1 | 0x41 | 0x00

    10:02:24 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    10:02:24 PM #17 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    10:02:24 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    10:02:24 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 8x (11,080 KB/s)

    10:02:24 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:02:24 PM #21 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    10:02:24 PM #22 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    10:02:24 PM #23 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:02:24 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:05:47 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00BD0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:47 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09091400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:47 PM #27 Text 0 File Mmc.cpp, Line 19340
    Writer-Buffer for HP DVD Writer 840e\H2 T0 reduced to 32768Bytes

    10:05:47 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09091400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:47 PM #29 CDR -500 File Writer.cpp, Line 311
    SCSI command aborted
    HP DVD Writer 840e\H2 T0

    10:05:47 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:05:47 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    10:05:47 PM #32 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was -1

    10:05:47 PM #33 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:47 PM #34 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:49 PM #35 CDR -500 File WriterStatus.cpp, Line 167
    SCSI command aborted
    HP DVD Writer 840e\H2 T0

    10:05:49 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    10:05:49 PM #37 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:49 PM #38 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:50 PM #39 CDR -500 File WriterStatus.cpp, Line 172
    SCSI command aborted
    HP DVD Writer 840e\H2 T0

    10:05:50 PM #40 TRANSFER -39 File WriterStatus.cpp, Line 172
    Could not perform EndSession

    10:05:50 PM #41 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 8x (11,080 KB/s)

    10:05:50 PM #42 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    10:05:50 PM #43 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    10:05:50 PM #44 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    10:05:52 PM #45 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 6:00:00 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 8/8/2006 11:20:03 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  5. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    i don't dissect Nero logs anymore, i've done literally 1000's of them, they drive me mad :)

    but i'll make an exception (just don't tell any of the regulars LOL)..


    - that version is absolutely fine and stable/bug free

    - burners' firmware's up to date according to this - http://h10025.www1.hp.com/ewfrf/wc/...s&lc=en&dlc=en&product=1101874&dlc=en&lang=en

    - that's not good, virtually no free memory so the hard drive will be 'swapping' ie thrashing the hard disk using the hasd disk as virtual memory (not good, especially during a burn)

    - this is the one bit i've never figured out about Nero - i don't know if these DRM messages in a Nero log mean you're trying to back up a movie that's still 'protected', or not..

    edit- i re-read your first post, you reckon you're dealing with the movie encryption fine, so it should be safe to ignore this section..

    - firmware quite happily understands/recognises those (very nice) disks

    - hmmm, see my comment about lack of free memory

     
    Last edited: Apr 11, 2007
  6. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    Thank you I will check into the memory do you have any suggestions on what to do with it??
    THanks again!!
     
  7. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    dont multitask during burning,(running other programs)

    get some more ram, another stick of 512mb would help a lot, the more the better.
     
  8. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    To make a long story short, the drive wasn't reading the data in the BCA. Then you started getting scsi (drives) aborted errors. I'd suspect something to do with software interfering with the drive(s). A quick way to see and clear things up is to delete all the backup software and then install in steps to see where the problems come in. I'm suspecting packet ware or driver conflicts with Nero and Roxio. Delete both and clean up after Nero with the Nero cleaner tool and RoxiZap for Roxio cleanup. Delete Shrink, even if you have before. Delete the rest of your backup programs if it isn't too difficult. Be sure to delete any packet (batch) writing programs. Clean up, run a reg cleaner and reboot. Install your decryption software, DVD Shrink, and Nero (Do Not Install InCD). I'd reboot to allow Windows a good "handshake" with the programs. Now try a backup and save the log. Use the same media, that's good stuff with MCC. Burn at a reasonable speed (4-8X). If it works good you're in business. If not, post the new Nero burn log.
     
    Last edited: Apr 11, 2007
  9. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    Were do I find the Nero clean up tool? I looked under program files and in nero itself. I haven't deleted it yet but I was just wondering where to find this application. So far I have reinstalled everything but Nero.
    Thanks for everyone's help!!
     
  10. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    The Nero website.
     
  11. johnl123

    johnl123 Regular member

    Joined:
    Nov 3, 2005
    Messages:
    2,421
    Likes Received:
    0
    Trophy Points:
    46
    The clean tool you seek for the proper removal of Nero is found here:
    General-CleanTool.zip
    http://www.nero.com/nero7/enu/General_CleanTool.html

    That clean tool should work for Nero 6 as well, but if you want the one specifically for version 6 then look here:
    General-CleanTool.zip
    http://www.nero.com/nero7/enu/Nero_6_CleanTool.html

    For other Nero System cleaners, look here:
    http://www.nero.com/nero7/enu/Clean_Tools.html
     
    Last edited: Apr 13, 2007
  12. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Once you get everything cleaned up and the Nero installed, do a backup and let us know what happens. If the burn fails, include the log. If the burn fails, while you're waiting, install ImgBurn. Use Shrink to transcode your movie to the hard drive. Under target select Create DVD Files: Hard Disk Folder. Use your player software to make sure the files play good and then try burning with ImgBurn. Put a DVD recordable in the drive and don't forget to set the speed. Use Build mode, under Device select your burner, then browse for the folder, select and click the files to DVD (burn) icon and you're there. That tells if it's just one burner program or more than just Nero. Hopefully you won't need to do the extra work, but just in case ...
     
    Last edited: Apr 13, 2007
  13. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    Ok, I reinstalled nero now too and used the demo version I'd gotten a link from several people here. It still didn't work but I can't find the nero history file in this nero. I looked under program files and the nero file but I couldn't find it. But it still didnt work this time!
     
  14. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    If you are using nero 7 then look in the core folder, thats where it will be, not really sure if it doesn't make if your using a demo, though.

    did you use that roxio zap tool to remove that driver?

    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
    here is a tool to get rid of it, like creaky said it may be causing the problem with nero
     
    Last edited: Apr 14, 2007
  15. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    Ok thank you I found it. I completely uninstalled Roxio since I don't use it, I'll clear it out now with roxio zap though. P.S. I can't add anymore RAM my computers maxed out now. Here is the last log file:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 8/8/2006 11:20:04 PM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM

    NT-SPTI used
    Nero API version: 7.8.5.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 8, 5, 0

    Recorder: <HP DVD Writer 840e> Version: 68JH - HA 1 TA 1 - 7.8.5.0
    Adapter driver: <USB 2.0> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : QSI CDRW/DVD SBW242C atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    QSI CDRW/DVD SBW242C D: CDRom0
    HP DVD Writer 840e E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    BUFE : 0
    Physical memory : 445MB (456176kB)
    Free physical memory: 192MB (196864kB)
    Memory in use : 56
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.4.2007
    NeroAPI
    12:27:59 PM #1 Phase 112 File APIProgress.cpp, Line 285
    DVD-Video files reallocation started

    12:28:00 PM #2 Phase 114 File APIProgress.cpp, Line 285
    DVD-Video files reallocation completed (no file modified)

    12:28:00 PM #3 Phase 111 File APIProgress.cpp, Line 285
    DVD-Video files sorted

    12:28:00 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    12:28:01 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:28:01 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    12:28:01 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    12:28:01 PM #8 Text 0 File Burncd.cpp, Line 3499
    Turn on Disc-At-Once, using DVD media

    12:28:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2227775 (495:03.50, 4351MB)

    12:28:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO

    12:28:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 2949
    Recorder: HP DVD Writer 840e, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    12:28:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:28:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2227776 (2227776) = #2227776/495:3.51
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227776 blocks [E: HP DVD Writer 840e]
    --------------------------------------------------------------

    12:28:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [E: HP DVD Writer 840e] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562485248, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2227776 | 0 | 0x00
    2227776 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    12:28:02 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    12:28:02 PM #16 Text 0 File Burncd.cpp, Line 4278
    Caching options: cache CDRom or Network-No, small files-Yes (<32KB)

    12:28:02 PM #17 Phase 24 File APIProgress.cpp, Line 285
    Caching of files started

    12:28:02 PM #18 Text 0 File Burncd.cpp, Line 4397
    Cache writing successful.

    12:28:02 PM #19 Phase 25 File APIProgress.cpp, Line 285
    Caching of files completed

    12:28:02 PM #20 Phase 36 File APIProgress.cpp, Line 285
    Burn process started at 8x (11,080 KB/s)

    12:28:02 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:28:02 PM #22 Text 0 File DVDR.cpp, Line 3192
    Recording mode: Sequential Recording Mode

    12:28:02 PM #23 Text 0 File DVDR.cpp, Line 3348
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:28:02 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x08947040: Len x648

    12:28:02 PM #25 Text 0 File Cdrdrv.cpp, Line 9856
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: -
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:28:02 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 66059200

    12:38:32 PM #27 Text 0 File DVDR.cpp, Line 3750
    EndDAO: Last written address was -1 (FFFFFFFFh)

    12:38:32 PM #28 CDR -1114 File WriterStatus.cpp, Line 162
    Reset occurred
    E: HP DVD Writer 840e

    12:38:32 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    12:38:32 PM #30 Phase 39 File APIProgress.cpp, Line 285
    Burn process aborted

    12:38:32 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 863
    DRM: DRM burn session terminated.

    12:38:32 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 892
    DRM: Closing entire DRM handling. Bye.

    12:38:32 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    12:38:37 PM #34 Text 0 File Cdrdrv.cpp, Line 11214
    DriveLocker: UnLockVolume completed

    12:38:37 PM #35 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 8/8/2006 11:20:03 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Apr 14, 2007
  16. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    no need to use the roxio zap tool since that driver is not in the log,
    it looks like you are getting the same error

    have you tried a different burning program to see if nero is the problem?

    try imgBurn(free)
    http://www.imgburn.com/index.php?act=download
     
  17. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Speaking of like minds. LOL

    I was surprised when I came on this evening and there wasn't already a comment as to whether ImgBurn worked or not.
     
    Last edited: Apr 14, 2007
  18. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46
    pacman,
    i thought you said something about ImgBurn and i went back to look if you did, and missed that part

    guess i need to get my eyes checked. ;) LOL
     
  19. robpardee

    robpardee Member

    Joined:
    Feb 27, 2007
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    I tried selecting the ImgBurn with DVD decrypter from the DVD shrink but it didn't work either. I downloaded the ImgBurn program too but I don't know how to use it. I'm getting DVDFab Platnum soon and I'm hoping that that will do it for me.
     
  20. 300bowler

    300bowler Regular member

    Joined:
    May 16, 2006
    Messages:
    1,918
    Likes Received:
    0
    Trophy Points:
    46

Share This Page