1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVD Shrink Suddenly Won't Burn (Even Older DVDS!)

Discussion in 'DVD Shrink forum' started by mfan2121, Apr 28, 2007.

  1. mfan2121

    mfan2121 Member

    Joined:
    Apr 28, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    ok so i tried a search on this forum & most people were having problems with DVD shrink burning newer movies due to new encryptions. i even tried following the solutions for these problems (i.e. tried using ripti4me, imgburn, etc.). then i tried burning an older DVD that I have previously burned before & i realized that even THAT won't burn now!! it does the same thing every time- it finished analyzing & gives an error at 0% burning before it even starts. the error log is below. PLEASE if anyone can help it would appreciated! my burner is only a year & a half old, and I have already tried uninstalling/reinstalling/updating all my software with no luck. thanks in advance!

    Windows 2000 5.0
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 7/13/2003 2:49:42 AM
    Nero API version: 6.0.0.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 2 TA 0 - 6.0.0.0
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-00CAA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MITSUMI CR-48XATE atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITEON DVD-ROM LTD163D atapi Port 1 ID 1 DMA: On
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 703MB (720368kB)
    Free physical memory: 394MB (403764kB)
    Memory in use : 43 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.4.2007
    NeroAPI
    11:21:21 AM #1 Phase 112 File APIProgress.cpp, Line 232
    DVD-Video files reallocation started

    11:21:21 AM #2 Phase 114 File APIProgress.cpp, Line 232
    DVD-Video files reallocation completed (no file modified)

    11:21:21 AM #3 Phase 111 File APIProgress.cpp, Line 232
    DVD-Video files sorted

    11:21:21 AM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    11:21:21 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814
    First writeable address = 0 (0x00000000)

    11:21:21 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3814
    First writeable address = 0 (0x00000000)

    11:21:21 AM #7 Text 0 File Burncd.cpp, Line 3081
    Turn on Disc-At-Once, using DVD media

    11:21:21 AM #8 Text 0 File DlgWaitCD.cpp, Line 224
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 2286191 (508:02.41)

    11:21:21 AM #9 Text 0 File DlgWaitCD.cpp, Line 229
    Write in overburning mode: FALSE

    11:21:22 AM #10 Text 0 File DlgWaitCD.cpp, Line 1688
    Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    11:21:22 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 757
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 2286192 (2286192) = #2286192/508:2.42
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286192 blocks [_NEC DVD_RW ND-3500AG]
    --------------------------------------------------------------

    11:21:22 AM #12 Text 0 File Burncd.cpp, Line 3318
    Recorder and media-info
    =======================
    Burning to _NEC DVD_RW ND-3500AG on a DVD-R media

    11:21:22 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 910
    Prepare recorder _NEC DVD_RW ND-3500AG for write in cue-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387461120

    11:21:22 AM #14 Phase 24 File APIProgress.cpp, Line 232
    Caching of files started

    11:21:22 AM #15 Phase 25 File APIProgress.cpp, Line 232
    Caching of files completed

    11:21:22 AM #16 Phase 36 File APIProgress.cpp, Line 232
    Burn process started at 6.1x (8,418 KB/s)

    11:21:22 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    11:21:22 AM #18 Text 0 File DVDR.cpp, Line 1407
    Recording mode: Sequential Recording Mode

    11:21:22 AM #19 Text 0 File Mmc.cpp, Line 18119
    Set BUFE: JustLink -> ON

    11:21:22 AM #20 Text 0 File DVDR.cpp, Line 1522
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:21:22 AM #21 Text 0 File Cdrdrv.cpp, Line 7827
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!.....
    02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:21:22 AM #22 SCSI -1046 File Cdrdrv.cpp, Line 1151
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x70 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    11:21:22 AM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1508
    Illegal disc

    11:21:22 AM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1508
    Could not perform start of Disc-at-once

    11:21:22 AM #25 Phase 38 File APIProgress.cpp, Line 232
    Burn process failed at 6.1x (8,418 KB/s)


    Existing drivers:
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 5/7/2006 12:29:38 AM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 5/7/2006 12:29:38 AM
    File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 6/13/2001 6:30:32 PM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. FFsp42

    FFsp42 Regular member

    Joined:
    Feb 5, 2006
    Messages:
    152
    Likes Received:
    0
    Trophy Points:
    26
    Try cleaning your machine and see if that alleviates any problems. Defrag your HDD and run CCleaner. Find it here: http://www.ccleaner.com
    DVD Shrink is notorious for not responding well to a fragmented HDD. Worth a shot!
    Also, have you tried uninstalling Shrink and reinstalling it again?
     
  3. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,787
    Likes Received:
    1
    Trophy Points:
    66
    1.Do you have Roxio installed. If so unistalled Roxio completely.

    2.SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30


    You computer and burner are in conflict and you are getting an Illegal disk error


    3.Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16
    Update your burner's firmware as it is behind

    http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=23
     
    Last edited: Apr 28, 2007
  4. mfan2121

    mfan2121 Member

    Joined:
    Apr 28, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    FFsp42: Yes ive tried reinstalling Shrink to no avail...im running the defrag right now so hopefully it will help, thanks!

    Car.mike: No I do not have Roxio or any other burning software besides Nero installed...I just updated the firmware for my burner so i'll see if that does anything as well...

    Ill keep you guys updated!
     
  5. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    I think what Car.Mike was getting at is the same thing I noticed.
    Cdr4_2K.sys and Cdralw2k.sys
    Those are Roxio drivers and are a common problem. You can google them and you'll see what I mean. Since Roxio is no longer on the PC, I'd suggest using RoxiZap to remove those drivers. It's a cleaner tool available at the Roxio site and some other sites, just google. Run a reg program and then reboot to see if the problem clears up.
     
    Last edited: Apr 29, 2007
  6. mfan2121

    mfan2121 Member

    Joined:
    Apr 28, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    hey all...ok well I burned a DVD fine just now before i even ran Roxizap--but I just ran it now anyway for good measure...im currently burning another DVD now--if this one works fine too then i should be back in business--thanks for your help guys!!
     
  7. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Glad you got it under control. If you googled those drivers you saw what I was talking about. Even if not the problem, it's good preventive maintenance getting rid of them, especially since Roxio is gone.
     

Share This Page