I just got some new blank DVD's and nero will not burn my, this has happened before with other blank DVD's. I fixed the problem with a flash disk i downloaded from dell, i tried this again but problem did not correct. Here is error log file Thanks for your help in advance!!! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.4 Internal Version: 7, 0, 1, 4 (Nero Express) Recorder: <_NEC DVD+-RW ND-6500A> Version: 203E - HA 1 TA 3 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.0.1.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom3 SCSIVAX DVD/CD-ROM G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515452kB) Free physical memory: 161MB (165648kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.2.2007 Burn DVD Image 11:49:18 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 71680KB of Memory 11:49:18 AM #2 Text 0 File Reader.cpp, Line 124 Reader running 11:49:19 AM #3 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 11:49:19 AM #4 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285997 (507:59.72, 4464MB) 11:49:19 AM #5 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 11:49:19 AM #6 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 11:49:19 AM #7 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:49:19 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2285998 (2285998) = #2285998/507:59.73 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285998 blocks [D: _NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 11:49:19 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681723904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2285998 | lead-out | 1 | 0x41 | 0x00 11:49:19 AM #10 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:49:19 AM #11 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 11:49:19 AM #12 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 11:49:19 AM #13 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 11:49:19 AM #14 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 2.4x (3,324 KB/s) 11:49:19 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:49:19 AM #16 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 11:49:19 AM #17 Text 0 File MMC.cpp, Line 21611 Set BUFE: JustLink -> ON 11:49:19 AM #18 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 11:49:19 AM #19 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:49:19 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 323 D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 E1 B0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 11:49:19 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: _NEC DVD+-RW ND-6500A 11:49:19 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 11:49:19 AM #23 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/08/2004 10:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
that's pretty close to the edge of the disk.... lower it to 4400MB or so. use a more stable version of Nero 7: 7.5.7.0 Before updating to this version .... save your serial #, uninstall Nero, then use this free registry cleaner called CCleaner, then Nero7 Clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html reboot and defrag! and then reinstall 7.5.7.0 from here http://www.filehippo.com/download_nero_7_premium/?1708 here's your drive: http://www.videohelp.com/dvdwriters...&hddvdrom=&orderby=Name&hits=50&Search=Search noticed it's a 4x drive and if you updated your firmware to the 203E it should let it do 8x and maybe 16x disks........ some 16x media may or may not be recognized by your drive to perform the correct write strategies to burn that 16x disk. Hopefully those Sony 16x disks won't cause a problem, but burning too slowly can be just as bad as burning too fast! Burn at 4x to 8x for those 16x DVD media! and that's why you got this:
still will not work, i have downloaded new nero, and burning option remains at 2.3 ish, here is error log cheers... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 203E - HA 1 TA 0 - 7.5.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.5.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 SCSIVAX DVD/CD-ROM G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515452kB) Free physical memory: 151MB (154648kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.2.2007 Burn DVD Image 5:03:53 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:03:54 PM #2 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using DVD media 5:03:55 PM #3 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285997 (507:59.72, 4464MB) 5:03:55 PM #4 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO (enabled: CD) 5:03:55 PM #5 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 5:03:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:03:55 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2285998 (2285998) = #2285998/507:59.73 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285848 blocks [Main] -------------------------------------------------------------- 5:03:56 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681723904, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2285998 | 2285848 | 0x00 0 | 1 | 1 | 0x41 | 2285998 | 2285848 | 0x00 2285998 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:03:56 PM #9 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:03:56 PM #10 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 5:03:56 PM #11 Text 0 File Burncd.cpp, Line 4262 Cache writing successful. 5:03:56 PM #12 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 5:03:56 PM #13 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3,324 KB/s) 5:03:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:03:57 PM #15 Text 0 File DVDR.cpp, Line 3026 Recording mode: Sequential Recording Mode 5:03:57 PM #16 Text 0 File DVDR.cpp, Line 3182 Start write address at LBA 0 DVD high compatibility mode: Yes 5:03:57 PM #17 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:03:57 PM #18 SPTI -1046 File SCSIPassThrough.cpp, Line 293 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 E1 B0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 5:03:57 PM #19 CDR -1046 File ThreadedTransferInterface.cpp, Line 1780 Illegal disc D: _NEC DVD+-RW ND-6500A 5:03:57 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1780 Could not perform start of Disc-at-once 5:03:57 PM #21 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 2.4x (3,324 KB/s) 5:03:57 PM #22 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 5:03:57 PM #23 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 10:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
then I fear the worst.... your drive just doesn't like those DVD-R, 16x Sonys.... because it's 16x and it's not recognizing them as such ...... that's why you can't burn it more than 2.4x! go out and buy only 8x media for your drive! or ...... get a new drive and then you should be able to burn all the new media out there!
My advice would be take those Sony discs back to the store. About a month ago I got a 100 pack of those Sony 16X. There was not one decent burn on any of the ones I tried. My machine will burn 16X of anything else. When I took them back, the customer service person told me they were getting a lot of them back. I ordered some Taiyo Yuden and haven't had a problem since.
