1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dvd9 back of Gladiator fails on DVD-R DL

Discussion in 'DVD Shrink forum' started by esco007, Mar 27, 2007.

  1. esco007

    esco007 Member

    Joined:
    Mar 27, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I was trying to backup my Gladiator DVD so I could watch it on my DVD player (i bought it in the u.s. and i'm stationed abroad)and it failed. From the error log it looks like the problem occured while it was jumping from layer 1 to layer 2.

    Log is below, is this a known issue? Any work arounds. This is my first time burning to a DL dvd.

    Thanks guys,


    xxxxxxxxxxxxxxxxxxxxxxxx

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.0.0
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Recorder: <TSSTcorp CD/DVDW TS-L632L>Version: HP16 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    CdRomPeripheral : TSSTcorp CD/DVDW TS-L632L atapi Port 1 ID 0 DMA: On
    DiskPeripheral : FUJITSU MHV2120BH PL nvata Port 2 ID 0 DMA: Off
    CdRomPeripheral : DN8463L GHI133E 2.0B vaxscsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-L632L E: CDRom0
    DN8463L GHI133E G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 958MB (981604kB)
    Free physical memory: 352MB (361384kB)
    Memory in use : 63 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2007
    NeroAPI
    7:12:00 PM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    7:12:00 PM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    7:12:00 PM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    7:12:01 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    7:12:01 PM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    7:12:01 PM #6 Text 0 File Writer.cpp, Line 113
    Writer E: TSSTcorp CD/DVDW TS-L632L running

    7:12:01 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    7:12:01 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    7:12:01 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    7:12:01 PM #10 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    9:20:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 4173823 (927:30.73, 8151MB)
    Last address to be written: 4065343 (903:24.43, 7940MB)

    9:20:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO

    9:20:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: TSSTcorp CD/DVDW TS-L632L, Media type: DVD+R9 Double Layer
    Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 0

    9:20:45 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL.)

    9:20:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 4065344 (4065344) = #4065344/903:24.44
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4065344 blocks [E: TSSTcorp CD/DVDW TS-L632L]
    --------------------------------------------------------------

    9:20:45 PM #16 Text 0 File Burncd.cpp, Line 3891
    Can only write at 2.4x (3,324 KB/s) instead of 8x (11,080 KB/s) to current disc.

    9:20:45 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [E: TSSTcorp CD/DVDW TS-L632L] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8325824512, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    4065344 | lead-out | 1 | 0x41 | 0x00

    9:20:45 PM #18 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:20:45 PM #19 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    9:20:45 PM #20 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    9:20:45 PM #21 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    9:20:45 PM #22 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 2.4x (3,324 KB/s)

    9:20:45 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:21:30 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x03c88600: Len x804

    9:21:30 PM #25 Text 0 File DVDPlusDualLayer.cpp, Line 628
    L0 Data Zone Capacity set to 2032720 (1F0450h, 3970MB) -> OK, confirmed setting

    9:21:30 PM #26 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
    Burning Layer 1

    9:21:30 PM #27 Text 0 File DVDPlusDualLayer.cpp, Line 665
    Start writing layer 1 at address 0 (0h)
    Recording mode: unknown Recording Mode

    9:21:30 PM #28 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R DL (14), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
    Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: FCFFFF h
    End Sector Number in Layer 0: 22044F h (LBN: 1F044F h, 3970 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 0 h
    Disc Manufacturer ID: RITEK...
    Media type ID: D01
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 64
    Media Specific [16..63]:
    00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
    25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
    02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................

    9:21:30 PM #29 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:42:03 PM #30 CDR -1206 File DVDPlusDualLayer.cpp, Line 1910
    Burning Layer 2

    9:42:03 PM #31 Text 0 File DVDPlusDualLayer.cpp, Line 1921
    Perform layer 1 to 2 jump before writing at address 2032720 (1F0450h)

    9:49:49 PM #32 SPTI -1135 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 20 3D 00 00 00 20 00 00 00
    Sense Area: 0xF1 00 03 00 DC 32 10 0A 00 00 00 00 0C
    Buffer x00ba0000: Len x10000
    0x00 00 01 BA 45 94 EE 35 74 2B 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 81 40 56 CC 00 6C 56 40 35
    0x00 0C 00 F1 91 00 65 F2 08 30 05 C0 5A 21 F8 06

    9:49:49 PM #33 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: TSSTcorp CD/DVDW TS-L632L

    9:49:49 PM #34 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:49:50 PM #35 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:53:01 PM #36 SPTI -1135 File SCSIPassThrough.cpp, Line 306
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x01e2a200: Len x20

    9:53:01 PM #37 Phase 127 File APIProgress.cpp, Line 278
    Generating DVD high compatibility borders

    9:53:01 PM #38 Phase 129 File APIProgress.cpp, Line 278
    Generating DVD borders completed successfully

    9:53:01 PM #39 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 2.4x (3,324 KB/s)

    9:53:01 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    9:53:01 PM #41 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Mar 27, 2007
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi esco007
    !st thing edit out the serial # at the top of the log - begins w/ 5C

    Yep the burn failed burning to layer 2.
    Ritek media is okay - better dual layer would be Verbatim.

    From the log looks like the drive fully recognizes the discs you using.
    So that's a plus. I couldn't find any newer for the burner - looks like this burner may have come with the laptop (?). Check the manufacturers site to see if there is a newer one then the one you have (HP16)
    Firmware sometimes has fixes for the drive besides just updating the media codes.

    You're using the original version of Nero 7 - they have been many fixes and enhancements since then.
    Update to the latest 7.8.5.0.

    You might also want to 'tweak' Shrink and autoburn w/ImgBurn - a better dual layer burner. Tweak for Shrink - link

    Give those a go and let us know.
     
  3. esco007

    esco007 Member

    Joined:
    Mar 27, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thanks. I will try using Img Burn instead of Nero.
    I have been looking around and i see alot of suggestions, mostly saying to use FabDVD or Rip4M instead. But I'm going to give another attempt before moving on, I hope this works DL are to expensive to be tossing out.

    Might end up with a bunch of new coasters :)

    I will post after I'm done trying again....in approx. 45 min.

    Thanks Again!
     
  4. esco007

    esco007 Member

    Joined:
    Mar 27, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Img Burn gave me a warning message stating the file had not been created correctly for DL burning. From what i understood the layer structure was not properly extracted by Shrink. It asked me if i wanted to continue anyways but i said no. I'm going to try the rip4m/img burn route instead.

    no point in trashing another DL

    thanks
     
  5. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    I didn't understand part of what you were saying. Nero and ImgBurn are both burners and you're going to try ImgBurn instead of the Nero you already have. That part I understood. When it came to the suggested decryption software, you only mentioned the ones that had been suggested. What are you using now?

    I noticed you have a couple of drives with DMA Off. That's okay for Sata drives, but if IDE they need to be DMA On.

    For doing a DL backup, I recommend using RipIt4Me. Besides removing the copy protection it processes for DVD compliance. Open the DVD in the 1-Click mode and rip in a file mode (not ISO). Once the files are opened in DVD Shrink you close Shrink and open the files in ImgBurn. Under Mode elect Build, under Output select Device (your burner), then browse to and select the folder with your movie in it. I leave the selection for layer break on auto (in the settings, don't worry about it). When ImgBurn gives you an option for the layerbreak, choose the best one. That's worked for me and should get it done.
     
  6. esco007

    esco007 Member

    Joined:
    Mar 27, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    The first time i used shrink.

    Now I used ripit4me, andit launched dvd decypter for me...I ripped it.
    I'm getting the same message "Optimal L1 Data Zone Start LBA: None Found!(VTS_01) This ismage has not been mastered correctly for burning onto a double layer (OTP Track Path) disc.

    None of the cells meet the DVD-Video specifications criteria for a potentail layyer break postion..... do you want to continue?"

    I will look around sure someone else has run into this...
     
    Last edited: Mar 27, 2007
  7. esco007

    esco007 Member

    Joined:
    Mar 27, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
     
  8. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    bbmayo's RI4M guide:
    http://webpages.charter.net/bacitup/TheGuides/pacman777guide.pdf

    I should have given you the link for the guide before. You can use the first part to guide you through setup. Since you're doing DL, select Full DVD for rip mode. Don't pay any attention to editing needs since you're not doing a DVD5 backup. Then as I mentioned before, close Shrink and open the HD files in ImgBurn. Good luck and let us know how it turns out. If you need any more help, just let us know.

    Do you understand the DMA issues?
     
    Last edited: Mar 27, 2007
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Since you have you hard drive on nvidia controller - Nero doesn't report DMA correctly. So it may just be on.
    The 2nd drive listed w/ DMA off is a virtual drive so no worries there.

    Look in device manager for the controllers to check.

    Another option since this one has nothing special on it is rip w/ decrypter only then burn the mds file w/ ImgBurn. This will have the correct layer break info.
     
  10. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Ripping with RipIt4Me is the same as ripping with DVD Decrypter only with the extras of compliance processing with FixVTS and compliance testing with DVD Shrink (the quick analysis). Also, if there is any decryption DVD Decrypter can't handle, RI4M creates a PSL file for handling the protection with Decrypter. It's really like having an updated DVD Decrypter with the ability to process for DVD compliance.

    The RipIt4Me output is compliant, but it doesn't have the layer break set for DL. I suggest opening the files in ImgBurn which does a good job of automatically setting the layer break. The files from RI4M should be in file mode (not ISO). Select Build under Mode and under Output select Device (your burner). Browse to the folder and select, click the big icon to start the build and burn process.
     
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    I agree with that totally but in this case since esco007 is getting a layer break error with file mode why not try ripping in iso mode w/ Decrypter and burn the mds file w/ ImgBurn.
     
  12. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    binkie7
    I don't think a DL error will appear with ImgBurn as it did with Nero. The reason I suggest ripping in file mode is more for newer copy protection. The files need to be available to the software for compliance processing. I realize there are successful methods for doing earlier releases that vary from my suggestions. Gladiator is so old Shrink would probably rip it. Ripping with Decrypter and burning with ImgBurn will probably be successful with Gladiator. However, I try to tell members how to do a backup so it will work with even the latest copy protection.

    Try doing a DL burn of Casino Royale, Saw 3, Talladega Nights or any of the newer ARccOS protected DVDs with a DVD Decrypter rip, even in ISO. As I mentioned, I describe methods that cover both pre-ARccOS and ARccOS protected DVDs. One method is less confusing than having several. For the experienced it's no problem, but it's a different story for those not as familiar with the software.
     
  13. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Agree again :)

    My assumption (& we all know what happens when we assume :) ) was esco007 was using RipIt4Me and ImgBurn method when they got the layer break error the 2nd time.
    But maybe doing using ImgBurn separately in build mode will do the trick.
    It's done well on my end in either mode for dual layer.

    Hopefully esco007 will post back with good news.
     
  14. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    Binkie
    I'm sure you're familiar with FixVTS. I've yet to hear of it making a set of files noncompliant. So, I see no difference between ripping with RI4M and DVD Decrypter, except for their success with the copy protection. With the compliant files in ImgBurn, the program sets up the layer break. I forgot to add for esco777 to click the calculator icon under Information when going to do the burn. Select the best layer break (note the stars). Once that's done and a DL recordable is in the drive, the icon lights up for the burn. ImgBurn creates the setup for the burn, so I don't see how it could read an error for the layer break when it creates it.

    esco777
    I didn't mention it before, but with the errors the way they were reading in the log, once you try the ImgBurn, if it doesn't work, try a Verbatim DL. If your burner is having trouble with the media, that might cause an error with the layer break.

    There wasn't anything that would effect the decryption of Gladiator. It's an older release with light copy protection. Either Decrypter or RipIt4Me should work. RipIt4Me is necessary for newer releases as Binkie and I were discussing. By ripping in the file mode and letting ImgBurn calculate and set the best layer break, I don't see how you could get an error unless it's something to do with the media.
     
    Last edited: Mar 28, 2007
  15. esco007

    esco007 Member

    Joined:
    Mar 27, 2007
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Hey guys thanks for the help, i followed your advice and it worked! I installed dvddecypter, img burn and r4m (already had shrink). I used r4m to extract the files (not the ISO) and then after it ripped the files i double clicked on the MD5 file that was created, img burn launched and started burning...perfect 1 to 1 copy.

    You guys rock!
     
  16. PacMan777

    PacMan777 Regular member

    Joined:
    Jun 11, 2013
    Messages:
    3,836
    Likes Received:
    0
    Trophy Points:
    46
    You're welcome. Glad to see you got-r-done.
     

Share This Page