1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DVDShrink/Nero problem

Discussion in 'DVD Shrink forum' started by tripperh, Aug 11, 2004.

  1. tripperh

    tripperh Guest

    Hello,

    I just downloaded DVDShrink and bought a copy of Nero, but am having trouble using them (at least the Nero).

    I'm able to successfully copy all of the files from the disc with DVDShrink, but then when I try to start burning with Nero, it goes up to about 6 or 7% complete and then spits out the disc with a burn error message.

    Any suggestions? Thanks a lot in advance.
     
  2. tripperh

    tripperh Guest

    I then tried DVD Decryptor, but the same problem happens. It starts to write and gets a few percent in and then stops with a burn error.

    Anyone have an idea what I should try? Thanks.
     
  3. sly_61019

    sly_61019 Senior member

    Joined:
    Jun 28, 2003
    Messages:
    9,522
    Likes Received:
    0
    Trophy Points:
    116
    what burner do you have, what brand media, and what does the error say?
     
  4. tripperh

    tripperh Guest

    It's a brand new SONY VAIO desktop with the built-in DVD SONY DVD RW DW-D18A VFS2 drive.

    I'm using Memorex DVD-Rs.

    I can't remember exactly what the message says, but it's something basic like "DVD Write Failed."

    I was able to successfully use the drive with a single-click copying program (ICopyDVDs 2) but I was winding up with a lot of freeze-frames, so I wanted to give DVDShrink a try.

    The Shrink portion seemed to go fine, and I have a file on my hard drive that I can watch, but when I try to burn it to disc with either the Nero I purchased online or the DVD Encryptor I downloaded for free, I get a similar error message.

    I'm new to this, so I don't know all of the terminology very well yet, but it seems like it never gets past an opening stage of the disc writing called the "lead-in" or something like that.

    Any light you could shed on this problem would be greatly appreciated.

    Thanks again.
     
    Last edited by a moderator: Aug 11, 2004
  5. bigorange

    bigorange Active member

    Joined:
    Apr 28, 2004
    Messages:
    2,978
    Likes Received:
    0
    Trophy Points:
    66
    It could very well be your media. Memorex farms out all their discs and you never know what you are getting from one batch to the next. In other words, they suck! You can use a little free tool called DVDinfopro to see what your discs are.

    Since you're having problems with another app, it would seem to me that the problem is not in your programs.

    I would also use RW's til you get the problem ironed out. Good media doesn't mean expensive. Branded Ritek G04 sells at Meritline for under .60 ea.w/free shipping. In over 300 burns, I have only had 1 flawed disc.
     
  6. tripperh

    tripperh Guest

    Awesome! Thanks so much. I'll try those Ritek discs and let you know how it goes.
     
  7. tripperh

    tripperh Guest

    Hello.

    I've now tried burning with TDK DVD-Rs and I get the same message...

    I just tried it and it says...

    Burn process failed at 4x (5,540 KB/s)

    1A23-0806-7130-1300-5956-9220

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.17
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <SONY DVD RW DW-D18A> Version: VFS2 - HA 1 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 7Y250P0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-D18A atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DW-D18A D: CDRom0
    HL-DT-ST DVD-ROM GDR8162 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047916kB)
    Free physical memory: 611MB (626412kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.8.2004
    NeroAPI
    4:32:33 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    4:32:33 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    4:32:33 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    4:32:33 PM #4 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B8C6000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    4:32:33 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    4:32:33 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    4:32:33 PM #7 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DW-D18A running

    4:32:33 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:32:33 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:32:33 PM #10 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-At-Once, using DVD media

    5:23:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    5:23:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    5:23:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: SONY DVD RW DW-D18A, Media type: DVD-R
    Disc Manufacturer: TTG01 -
    Disc Application Code: 64, Disc Physical Code: 193

    5:23:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

    5:23:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD RW DW-D18A ]
    --------------------------------------------------------------

    5:23:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [SONY DVD RW DW-D18A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    5:23:06 PM #17 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    5:23:06 PM #18 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    5:23:06 PM #19 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    5:23:06 PM #20 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    5:23:06 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:23:06 PM #22 Text 0 File DVDR.cpp, Line 1879
    Recording mode: Sequential Recording Mode

    5:23:06 PM #23 Text 0 File Mmc.cpp, Line 20401
    Set BUFE: Power-Burn -> ON , Generic write control : ON

    5:23:06 PM #24 Text 0 File DVDR.cpp, Line 2020
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:23:06 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:23:06 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C804000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    5:23:20 PM #27 Text 0 File Cdrdrv.cpp, Line 1294
    17:23:20.453 - SONY DVD RW DW-D18A\H1 T0 : Queue again later

    5:25:09 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C803000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    5:25:09 PM #29 SCSI -1023 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01430000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x2C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x01 0xD6 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x2C 0x00

    5:25:09 PM #30 CDR -1135 File Writer.cpp, Line 304
    Write error
    SONY DVD RW DW-D18A\H1 T0

    5:25:09 PM #31 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    5:25:09 PM #32 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    5:25:09 PM #33 Text 0 File DVDR.cpp, Line 2256
    EndDAO: Last written address was 120511

    5:25:09 PM #34 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C803000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    5:25:09 PM #35 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    5:25:09 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    5:25:09 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.

    5:25:11 PM #38 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B8C6000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 7/13/2004 7:16:01 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Any help you give would be great.

    Thanks.
     
    Last edited by a moderator: Aug 12, 2004
  8. guzoo

    guzoo Guest

    I have had similar problem and had to go to manufacturer for a firmware update for my DVD CD burner.
     
  9. notburnin

    notburnin Member

    Joined:
    Aug 12, 2004
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    I have nero 6, as well as dvd shrink.
    I have a movie on my hard drive , it has a VIDEO_TS folder that contains a collection of vub, ifo, and vob files in it.
    WHAT DO I NEED TO DO FROM HERE TO GET A DVD?
    I have no problem removing the copyrite and burning a disc from a disc, but as far as burning a disc from files stored on my hard drive, how is it done?
    many sleepless nights trying,
    Jonathan
     
  10. tripperh

    tripperh Guest

    How do you do the disc from a disc part? I can't even manage that yet.
     
  11. notburnin

    notburnin Member

    Joined:
    Aug 12, 2004
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    the disc to disc seems to be simple, I am using a laptop, so i needed to create a virtual drive with damon tools, all i do is put in a dvd, run it thru the dvd shrink, mount it on my virtual drive made with the damon tool then burn it with nero
     
  12. tripperh

    tripperh Guest

    Yeah, the Nero part is where I'm having trouble. I can't get it to burn without stopping with a burn error after a minute or two.
     
  13. notburnin

    notburnin Member

    Joined:
    Aug 12, 2004
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    if you have dvd shrink and dvd decrypter ya might not need nero, i am experimenting now, will know the results in about an hour. i will post them.
     
  14. tripperh

    tripperh Guest

    I've tried DVD Decryptor, and a similar problem happens with that, too, unfortunately.

    It's weird, because I'm using a brand new out-of-the-box Sony VAIO desktop that came with a DVD +- RW drive, so I assume it should work with these programs.
     
  15. notburnin

    notburnin Member

    Joined:
    Aug 12, 2004
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    have you set up yer dvd shrink properly? doom9 has a good page that tells ya how to do the initial set up.
     
  16. notburnin

    notburnin Member

    Joined:
    Aug 12, 2004
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    OK.
    To burn from one disc to another using dvd shrink and dvd decrypter is pretty easy. ya need nothing more than the 2 of those.
    first open dvd shrink, in the top left click open disc, then a box will pop up that says no disc, insert the disc you want burnt.when the title of your DVD appears in the box that said no disc, click ok.
    If you checked the little box that says enable video preview, you will see the video encoding, this only takes like a minute or less on my computer.
    Then a new box will pop up and start analysing yer video, this takes about a half hour on my computer.
    after that is done, a new box will pop up,the top will say, select target device (ISO image)
    the bottom will say, select target image file(DVD title)
    check the bottom box that says burn with dvd decrypter.
    it will burn and be done with a playable dvd.
     
    Last edited: Aug 12, 2004
  17. tripperh

    tripperh Guest

    Thanks for your response.

    For some reason, I've tried all of that, and it starts making the disc, but then it always stops with the burn error message I posted above.

    I don't know what can be causing it. I've now tried a couple different kinds of media.
     
  18. ddlooping

    ddlooping Active member

    Joined:
    Apr 29, 2003
    Messages:
    1,013
    Likes Received:
    0
    Trophy Points:
    66
    Hi all. :)

    tripperh, apart from Memorex what other media have you used?
     
  19. bigorange

    bigorange Active member

    Joined:
    Apr 28, 2004
    Messages:
    2,978
    Likes Received:
    0
    Trophy Points:
    66
    tripperh, sorry I took so long, been using RB/CCE. I noticed that from your log it doesn't seem to recognize your media. It also shows medium error.

    You said you tried TDK, I've found them to be OK, did you use DVDinfopro to analyze them? Also, you said you were going to try G04's, did you do that?

    I'm now wondering if your firmware needs updating. I would also check your ASPI layer.
    _X_X_X_X_X_[small][​IMG] [bold]GO VOLS![/bold]..Dell Media4600, XP,Pentium 4 @2.80GHz/800Mz,512MB,280HDw/8MB,17" flat panel,AIO-A920,8xDVD-ROM,integrated 5.1 audio, HPdc4000,PlextorPX-708UF,LiteOn SOHW 832S dual layer[/small]
     
    Last edited: Aug 13, 2004
  20. tripperh

    tripperh Guest

    Somewhat of a solution to my problem. Thanks for all the help, everyone.

    I ended up changing the burn speed from 4x to 2x and I've been able to make two perfect looking discs.

    I don't know why that should be, but I'm not going to fret over a few more minutes of burn time if it makes it work.

    So far, I've been successful with one TDK and GQ (Great Quality?) DVD-R and one GQ DVD-RW.

    Wish me luck with future burnings.
     

Share This Page