i have wasted 4 dl discs now...i am not sure what is going on...i have never had this problem in the past....image ready does it also I 22:38:28 DVD Decrypter Version 3.5.4.0 started! I 22:38:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 22:38:28 Initialising SPTI... I 22:38:28 Searching for SCSI / ATAPI devices... I 22:38:28 Found 2 DVD±RWs! I 22:39:54 Operation Started! I 22:39:54 Source File: F:\IMAX_DEEP_SEA.MDS I 22:39:54 Source File Sectors: 2,544,918 (MODE1/2048) I 22:39:54 Source File Size: 5,211,992,064 bytes I 22:39:54 Source File Implementation Identifier: UDF Toshiba DVD Video I 22:39:54 Destination Device: [0:1:0] Memorex DVD16+/-DL4RWlD2 JWS5 (E (ATA) I 22:39:54 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x) I 22:39:54 Destination Media Sectors: 4,173,824 I 22:39:54 Write Mode: DVD I 22:39:54 Write Type: SAO I 22:39:54 Write Speed: 2.4x I 22:39:54 Link Size: Auto I 22:39:54 Test Mode: No I 22:39:54 BURN-Proof: Enabled I 22:39:54 Optimal L0 Data Zone Capacity: 1,272,464 I 22:39:54 Optimal L0 Data Zone Method: Copied From Original Disc I 22:40:36 Filling Buffer... I 22:40:36 Writing LeadIn... I 22:40:38 Writing Image... W 22:41:20 Failed to Write Sectors 69472 - 69503 - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 22:41:20 Retrying (1 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (2 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (3 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (4 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (5 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (6 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (7 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (8 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (9 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (10 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (11 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (12 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (13 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (14 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (15 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (16 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (17 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (18 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (19 of 20)... W 22:41:21 Retry Failed - Invalid Address For Write W 22:41:21 Retrying (20 of 20)... W 22:41:21 Retry Failed! - Invalid Address For Write E 22:45:25 Failed to Write Sectors 69472 - 69503 - Logical Unit Communication CRC Error (ULTRA-DMA/32) I 22:45:25 Synchronising Cache... I 22:45:25 Closing Track... I 22:45:28 Finalising Disc...
Try updating your firmware... you are one version behind... Yours is JWS5 and JWS6 is available. That's all I really see. You're using good discs from the looks of it.
Use Imgburn (new updated version of dvd decrypter - no ripper in this app) guide to dual layer = http://forum.imgburn.com/index.php?showtopic=1780 ----------- firmware = imgburn, go to - TOOLS / DRIVE / check for firmware updates
Firmware is basically a set of operating instructions that tell your drive how to handle the disc based on the disc manufacturer ID. New disc come out with new ID's when improvements are made and if your drive doesn't have the ID in it's database, then it may not handle the disc properly. There are a few ways to get your firmware... go to your drive manufacturer's website and look for your drive in the support area. Or you could use a program called IMGBurn. If you don't have this program you should get it as it is a very good burning program that is free. Once you open up ImgBurn, click tools>Drive>check firmware. It will warn you that it's going to a website for your firmware, it's ok and it will tell your current version at that time. Then download the newest firmware and install it to your drive. Always make sure the firmware your downloading is for your drive. Installing the wrong firmware can render your drive useless.
No, click on JWS6 . It is an ZIP archive that you have to download. Unzipp it, and you will have an EXE application. Before you run it, make sure you don't have any discs in your drive. If you have another DVD drive, disable it. Run the JWS6.EXE(XFlash) file from the unzipped folder, not from the downloade archive.
i have one problem though actually....i didnt diable the other drive before i did the update....i didnt see that part until after...what should i do now?
You should be okay. The disabling part is just a preventive measure,to make sure you flash the right drive.
