1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

flashing benq drive help

Discussion in 'Xbox 360 - Modding & Hacking' started by ajf81280, Sep 16, 2011.

  1. ajf81280

    ajf81280 Member

    Joined:
    Feb 21, 2011
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    16
    I have a benq drive that has with as far as I know, since i have not flashed it in over a year lt 1.2 on it. I tried to play deus ex and it told me to update. I decided not to and that was a good idea since it would have reflashed my drive. Another game I have that I want to play is Dead island (non xgd3) version. My dashboard for those wondering is the kinect one (2.0.12611.0). The problem I have is that I no longer have a desktop computer and only a laptop. Is there a way that I can use my external drive enclosure to work with jungle flasher and flash the xbox drive once I drop it in? in other words it transmit data through usb. There is a switch for sata but I dont have my sata to esata cable right now either...any help would be appreciated.
     
  2. eebeejay

    eebeejay Regular member

    Joined:
    Nov 7, 2007
    Messages:
    2,767
    Likes Received:
    0
    Trophy Points:
    46
    You need to flash the drive back to stock firmware.
    Download the update to USB update from xbox.com.
    Update the console with that USB update.
    Flash your drive to the latest iXtreme Lt+ 1.91 or 1.92 firmware.

    Since you ony a laptop, you'll more than likely need to buy an Xecuter 360 USB Pro or a Maximus Lizard to do the flashing.
     
  3. ajf81280

    ajf81280 Member

    Joined:
    Feb 21, 2011
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    16
    alright so i have an xecuter ck3 lite...the device powers the drive..so i could open and close it. Im on a laptop, also i have an sata card that slide into the side of the computer. Everything is hooked in including the com port. jungle flasher .1.87 beta recognizes that i have a benq drive so everything for the majority must be hooked up right. My problem is that i can not get it to unlock so i can read firmware. I have tried the half open trick, clicking benq unlock, clicking intro device id but everytime i click intro device id it and do the power on off real quick it just runs the dots forever...everytime i do the benq unlock it just says sending magic keys DONE! but then says sending vendor intro...followed by vendor intro failed....do you know how i could resolved this? my drive is stock because i updated like you had said and no it wont play backups so i know its stock


    by the way this is my card that i have http://www.amazon.com/gp/product/B000NZZZDO
     
    Last edited: Sep 17, 2011

Share This Page