im simply trying to make a debricker batter/mem stick, and i dont understand whats not working. these are the directions - Connect the PSP to the PC with the Memory Stick inside via the USB Connection. - Format the Memory Stick using any utility. - Use mspformat to format the Memory Stick logically. - Remove the Memory Stick and disable the USB connection. - Connect the Memory Stick again via the USB connection of the PSP. - Manually create the PSP/GAME (optionally PSP/GAME150) folders on the Memory Stick. - Copy the "battery" and "installer" programs to the PSP/GAME (optionally PSP/GAME150) folder. - Copy the 1.50 official updater as UPDATE.PBP to the root of the Memory Stick. - Remove the Memory Stick and disable the USB connection. - Run "installer" through the firmware on the PSP. This application will create the firmware files on the root of the Memory Stick, as well as msipl.bin. - Connect the Memory Stick again via the USB connection of the PSP. - Execute "msipl" application on the PC with the msipl.bin to write the IPL to memory stick. - Remove the Memory Stick and disable the USB connection. - Execute "battery" application on the PSP to modify the battery. - Congratulation, you are now in posession of a "Magic Memory Stick" and a "JigKick Battery". well, i can get as far as the mspformat.. ive triple checked everything, but when i execute the format.bat, the dos wndow opens and asks me to hit Y to continue... so i hit y, and thats it, the window immediatly closes. I thought that maybe i downloaded a bad source, so i found another one, and im still having the same problem. its a small mem stick, so then i thought that perhaps it formatted quickly, but when i went to execute the next bat file, the window would open for a second, then close.... i clicked it about 900 times and managed to get a few lines of text off it. blocked [no partition] thats it. any ideas?