If anyone else was/is having problems getting their 360 drive to work on the computer, you might wanna read this. If your computer is using any type of RAID configuration this might help you get your computer to detect your drive. 1. Turn off your computer and boot into bios. It'll usually say what button to press. If not, try the del button. 2. Find where it says something like: RAID Configuration - enabled. Usually in Standard or Advanced BIOS Features but may be somewhere else. 3. Below that it will have the option to enable/disable RAID for specific sata slots or ports. Find which ones are part of your RAID configuration and disable all the others. (If you disable the wrong ones it will say error when loading your raid, no problem just use process of elmination) 4. Save and reboot when it loads it should display your dvd drive as IDE NOT under RAID. If it does this you did it correctly. If that doesn't work try a computer that boots using an IDE hard drive.