1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help burning w/dvd decrypter

Discussion in 'DVDR' started by brusifer, May 1, 2005.

  1. brusifer

    brusifer Member

    Joined:
    May 1, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I'm having problems burning with both Nero & DVD Decrypter. I seem to be able to copy to my computer okay (w/Decrypter)but keep getting an IO error when I want to burn to a dvd disc.
    Here's the error I see:
    I/O Error!

    Device: [1:1:0] DVDRW IDE 16X A07M (F:) (ATA)

    ScsiStatus: 0x02
    Interpretation: Check Condition

    CDB: 2A 00 00 00 00 00 00 00 20 00
    Interpretation: Write (10) - Sectors: 0 - 31

    Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 73 02 00 00 00 00
    Interpretation: Power Calibration Area Is Full

    ANY SUGGESTIONS?
    Thanks,
    bruse
     
  2. wolfniggr

    wolfniggr Regular member

    Joined:
    Dec 15, 2004
    Messages:
    1,080
    Likes Received:
    0
    Trophy Points:
    46
    Can you post your nero log?
     
  3. jim_dandy

    jim_dandy Active member

    Joined:
    Jan 9, 2004
    Messages:
    2,493
    Likes Received:
    0
    Trophy Points:
    66
    I copied this off the dvd decrypter website from LIGHTNING_UK the author of dvd decrypter.

     
  4. brusifer

    brusifer Member

    Joined:
    May 1, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I'd thought that it might've been the DVRs I was using. They were pretty cheap. I'll try a different brand. -Thanks.

    Wolf, here's the log from Nero:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <DVDRW IDE 16X> Version: A07M - HA 1 TA 1 - 6.3.1.17
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHA - HA 1 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 1 DMA: On
    : HPUATA Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITEON DVD-ROM LTD163 E: CDRom0
    DVDRW IDE 16X F: CDRom1
    HP CD-Writer+ 8200f G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 255MB (261132kB)
    Free physical memory: 51MB (52276kB)
    Memory in use : 79 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.5.2005
    DVD-Copy on the fly
    1:03:38 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    1:03:38 PM #2 Text 0 File Writer.cpp, Line 124
    Writer DVDRW IDE 16X running

    1:03:38 PM #3 Text 0 File DVDCopy.cpp, Line 271
    DVD Track-Information from source disc
    S01 T01 Con 0x04 Start 0 Len 2143088 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

    1:03:38 PM #4 Text 0 File DVDCopy.cpp, Line 374
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2143088 = 2143088, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    1:03:38 PM #5 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    1:03:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2143087 (476:14.37, 4185MB)

    1:03:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    1:03:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: DVDRW IDE 16X, Media type: DVD-R
    Disc Manufacturer: MUST 0 - 03
    Disc Application Code: 64, Disc Physical Code: 193

    1:03:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    1:03:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2143088 (2143088) = #2143088/476:14.38
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143088 blocks [DVDRW IDE 16X ]
    --------------------------------------------------------------

    1:03:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389044224, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2143088 | lead-out | 1 | 0x00 | 0x41

    1:03:38 PM #12 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 8x (11,080 KB/s)

    1:03:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    1:03:38 PM #14 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 6:41,820 (401820ms) -> OK

    1:03:38 PM #15 Text 0 File DVDR.cpp, Line 1876
    Recording mode: Sequential Recording Mode

    1:03:38 PM #16 Text 0 File Mmc.cpp, Line 20394
    Set BUFE: Super Link -> ON

    1:03:38 PM #17 Text 0 File DVDR.cpp, Line 2017
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:03:38 PM #18 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    1:04:03 PM #19 SCSI -1015 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x08280000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x02

    1:04:03 PM #20 CDR -1015 File Writer.cpp, Line 304
    Calibration area full

    1:04:03 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:04:03 PM #22 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    1:04:04 PM #23 Text 0 File DVDR.cpp, Line 2253
    EndDAO: Last written address was -1

    1:04:04 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    1:04:04 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    1:04:04 PM #26 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.27b, size=16000 bytes, created 8/25/2001 2:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 0, size=92672 bytes, created 7/7/2004 1:47:20 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 0, size=28672 bytes, created 7/7/2004 1:48:00 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 0, size=7680 bytes, created 7/7/2004 1:50:18 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    Any thoughts?
    -b.
     
  5. jim_dandy

    jim_dandy Active member

    Joined:
    Jan 9, 2004
    Messages:
    2,493
    Likes Received:
    0
    Trophy Points:
    66
    Ive never heard of that one before.....you "MUST" change your media choice LOL
     
  6. jim_dandy

    jim_dandy Active member

    Joined:
    Jan 9, 2004
    Messages:
    2,493
    Likes Received:
    0
    Trophy Points:
    66
    In the mean time you could try slowing down your burn speed,to 4x or even 2x,maybe even 1x
     
  7. baabaa

    baabaa Active member

    Joined:
    Jan 7, 2003
    Messages:
    2,217
    Likes Received:
    0
    Trophy Points:
    66
    , who are they??????

    Looks like you may be using a bad quality media..............

    Try another brand and see if it makes a difference - TDK, Maxell, Taiyo Yuden, Ritek, AZO, Fuji are all reputable brands.
     
  8. jim_dandy

    jim_dandy Active member

    Joined:
    Jan 9, 2004
    Messages:
    2,493
    Likes Received:
    0
    Trophy Points:
    66
    I checked MUST out on a very extensive dvd database that I use, and I found MMORE but no MUST.
    Follow what my "wooly" friend says, and you should be fine:)
     
  9. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    8,638
    Likes Received:
    0
    Trophy Points:
    96
    Try disabling you InCD program, see if that helps.
     
  10. wolfniggr

    wolfniggr Regular member

    Joined:
    Dec 15, 2004
    Messages:
    1,080
    Likes Received:
    0
    Trophy Points:
    46
    Try some better media(anything made in japan, if that makes it easier) and slow down to at lest 4x like suggested. Though I never had a problem with INCD, if the change in media and speed don't solve the problem, uninstall it like suggested. Good luck, brusifer.
     

Share This Page