1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help please (nero ejecting dvds)

Discussion in 'DVDR' started by ired, Jan 17, 2005.

  1. ired

    ired Member

    Joined:
    Jan 17, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    hello i am using dvd shirink to rip dvds and nero to burn them. the last few days the burning procedure begins but at around 50% nero ejects the dvd.
    also the remaining time reaches 0 long before the status bar is comleted.
    thanks for your help...
     
  2. flip218

    flip218 Moderator Staff Member

    Joined:
    Apr 25, 2004
    Messages:
    7,460
    Likes Received:
    0
    Trophy Points:
    116
    do you get any error messages? Can you post a log?
     
  3. ired

    ired Member

    Joined:
    Jan 17, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    no error message just "burning process failed"
     
  4. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,163
    Likes Received:
    0
    Trophy Points:
    66
    That sounds like an error message to me.

    We would need a Nero log to help of course.
    There should be a complete NeroHistory.log file in C:\Program Files\Ahead\Nero

    We don't need that entire log, but just the last part of that log which will have information about your last burn failure. Be sure to remove your serial number when you post that part of the log.
     
  5. ired

    ired Member

    Joined:
    Jan 17, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    i dint know about this history.log... sorry
    i hope that this is the one you ll need:

    DVD-Video
    21:22 #1 Phase 112 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation started

    21:22 #2 Phase 114 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation completed (no file modified)

    21:22 #3 Text 0 File Isodoc.cpp, Line 5907
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    21:22 #4 Phase 111 File dlgbrnst.cpp, Line 1843
    DVD-Video files sorted

    21:22 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    21:22 #6 Text 0 File Writer.cpp, Line 127
    Writer DVDRW IDE1008 running

    21:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
    First writeable address = 0 (0x00000000)

    21:22 #8 ISO9660GEN -11 File geniso.cpp, Line 3861
    First writeable address = 0 (0x00000000)

    21:22 #9 Text 0 File Burncd.cpp, Line 3169
    Turn on Disc-at-once, using DVD media

    21:22 #10 Text 0 File DlgWaitCD.cpp, Line 230
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 2056879 (457:05.04)

    21:22 #11 Text 0 File DlgWaitCD.cpp, Line 235
    Write in overburning mode: FALSE

    21:22 #12 Text 0 File DlgWaitCD.cpp, Line 1878
    Recorder: DVDRW IDE1008, Media type: DVD-R
    Disc Manufacturer: Prodis - cS04
    Disc Application Code: 64, Disc Physical Code: 193

    21:22 #13 Text 0 File DlgWaitCD.cpp, Line 393
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2056880 (2056880) = #2056880/457:5.5
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2056880 blocks [DVDRW IDE1008 ]
    --------------------------------------------------------------

    21:22 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
    Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4212797440, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2056880 | lead-out | 1 | 0x00 | 0x41

    21:22 #16 Phase 24 File dlgbrnst.cpp, Line 1843
    Caching of files started

    21:22 #17 Phase 25 File dlgbrnst.cpp, Line 1843
    Caching of files completed

    21:22 #18 Phase 36 File dlgbrnst.cpp, Line 1843
    Burn process started at 4x (5.520 KB/s)

    21:22 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:22 #20 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 12:47,518 (767518ms) -> OK

    21:22 #21 Text 0 File DVDR.cpp, Line 1479
    Recording mode: Sequential Recording Mode

    21:22 #22 Text 0 File Mmc.cpp, Line 19140
    Set BUFE: Super Link -> ON

    21:22 #23 Text 0 File DVDR.cpp, Line 1594
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:22 #24 Text 0 File Cdrdrv.cpp, Line 7909
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    21:23 #25 Text 0 File Writer.cpp, Line 318
    21:23:07.359 - DVDRW IDE1008 : Queue again later (Intervall : 11msec)

    22:05 #26 SCSI -1135 File Cdrdrv.cpp, Line 1411
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04320000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x19 0x29 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    22:05 #27 CDR -1135 File Writer.cpp, Line 335
    Write error

    22:05 #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    22:05 #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    22:06 #30 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    22:06 #31 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    22:06 #32 Phase 38 File dlgbrnst.cpp, Line 1843
    Burn process failed at 4x (5.520 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/9/1999 12:06
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/8/2002 01:27 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  6. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,163
    Likes Received:
    0
    Trophy Points:
    66
    Thats a start, but is not a complete log. There should have been a little more at the beginning.

    Here is where it starts.

    ====== *** Nero-Burning Rom, History File *** ======
    Name
    Location
    1A23-XXXX-XXXX-XXXX-XXXX-XXXX [bold](serial number)[/bold]

    Windows XP 5.1
    IA32

    Up to what you supplied.

    We need that to see your firmware version and if you have DMA enabled.

    From what you supplied.
    Those discs should be OK but you might try some others.

    Make sure DMA is on for all devices.
    Make sure you firmware is up to date.
    Try different disc's.
    Try burning at a slower speed, 2X
     
    Last edited: Jan 18, 2005
  7. ired

    ired Member

    Joined:
    Jan 17, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    the firmware might not be a problem because i updated recently...
    thanks for your help and the patience...

    ====== *** Nero-Burning Rom, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/9/1999 12:06
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/6/2003 15:25
    Nero version: 6.0.0.16
    Recorder: <DVDRW IDE1008> Version: 0159 - HA 1 TA 0 - 6.0.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <DVDRW IDE1008 >Version: 0159 - HA 1 TA 0 - 6.0.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    DVDRW IDE1008 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (83886080) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 283MB (290672kB)
    Memory in use : 44 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.1.2005
    DVD-Video
    21:22 #1 Phase 112 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation started

    21:22 #2 Phase 114 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation completed (no file modified)

    21:22 #3 Text 0 File Isodoc.cpp, Line 5907
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    21:22 #4 Phase 111 File dlgbrnst.cpp, Line 1843
    DVD-Video files sorted

    21:22 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    21:22 #6 Text 0 File Writer.cpp, Line 127
    Writer DVDRW IDE1008 running

    21:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3861
    First writeable address = 0 (0x00000000)

    21:22 #8 ISO9660GEN -11 File geniso.cpp, Line 3861
    First writeable address = 0 (0x00000000)

    21:22 #9 Text 0 File Burncd.cpp, Line 3169
    Turn on Disc-at-once, using DVD media

    21:22 #10 Text 0 File DlgWaitCD.cpp, Line 230
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 2056879 (457:05.04)

    21:22 #11 Text 0 File DlgWaitCD.cpp, Line 235
    Write in overburning mode: FALSE

    21:22 #12 Text 0 File DlgWaitCD.cpp, Line 1878
    Recorder: DVDRW IDE1008, Media type: DVD-R
    Disc Manufacturer: Prodis - cS04
    Disc Application Code: 64, Disc Physical Code: 193

    21:22 #13 Text 0 File DlgWaitCD.cpp, Line 393
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 769
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2056880 (2056880) = #2056880/457:5.5
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2056880 blocks [DVDRW IDE1008 ]
    --------------------------------------------------------------

    21:22 #15 Text 0 File ThreadedTransferInterface.cpp, Line 938
    Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4212797440, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2056880 | lead-out | 1 | 0x00 | 0x41

    21:22 #16 Phase 24 File dlgbrnst.cpp, Line 1843
    Caching of files started

    21:22 #17 Phase 25 File dlgbrnst.cpp, Line 1843
    Caching of files completed

    21:22 #18 Phase 36 File dlgbrnst.cpp, Line 1843
    Burn process started at 4x (5.520 KB/s)

    21:22 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:22 #20 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 12:47,518 (767518ms) -> OK

    21:22 #21 Text 0 File DVDR.cpp, Line 1479
    Recording mode: Sequential Recording Mode

    21:22 #22 Text 0 File Mmc.cpp, Line 19140
    Set BUFE: Super Link -> ON

    21:22 #23 Text 0 File DVDR.cpp, Line 1594
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:22 #24 Text 0 File Cdrdrv.cpp, Line 7909
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    21:23 #25 Text 0 File Writer.cpp, Line 318
    21:23:07.359 - DVDRW IDE1008 : Queue again later (Intervall : 11msec)

    22:05 #26 SCSI -1135 File Cdrdrv.cpp, Line 1411
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04320000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x19 0x29 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    22:05 #27 CDR -1135 File Writer.cpp, Line 335
    Write error

    22:05 #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    22:05 #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    22:06 #30 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    22:06 #31 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    22:06 #32 Phase 38 File dlgbrnst.cpp, Line 1843
    Burn process failed at 4x (5.520 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/9/1999 12:06
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/8/2002 01:27 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  8. Veblin

    Veblin Active member

    Joined:
    Feb 27, 2003
    Messages:
    1,163
    Likes Received:
    0
    Trophy Points:
    66
    Your Nero version needs to be updated.
    Current version: 6.6.0.6
    http://www.nero.com/us/nero-up.php

    DMA should be on for all peripheral devices.
    DMA Mode for ATA/ATAPI Devices in Windows XP.
    http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx

    You seem to have the newest firmware, though the numbering system they have seems to be out of order and hard to understand.
    http://www.btc.com.tw/english/3-1-4driver_download_dvd_dual.htm
    http://forum.rpc1.org/dl_firmware.php?download_id=1727
     
    Last edited: Jan 18, 2005
  9. ired

    ired Member

    Joined:
    Jan 17, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    thank you very much!
    the information that you provide me was very helpfull...
     

Share This Page