1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help with DVD Decrypter i/o Error, Failed to Write Sectors

Discussion in 'PS2 - DVD backup discussion' started by Metosky, Jan 14, 2005.

  1. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    I have only burned 4 backups. 1 works fine, the others play 20sec. of the intro of that game'"same 3 backup" then that pink-red screen pops up. "please put in ps or ps2 format disk"
    Why dose that one game do that?
    and now I can't burn any backups.

    I 10:33:40 DVD Decrypter Version 3.5.2.0 started!
    I 10:33:40 Microsoft Windows 98 SE
    W 10:33:40 Drive C:\ (FAT32) does not support single files > 4 GB
    W 10:33:40 Drive D:\ (FAT32) does not support single files > 4 GB
    I 10:33:40 Initialising ASPI...
    I 10:33:41 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.5.7.1008
    I 10:33:41 Searching for SCSI / ATAPI devices...
    I 10:33:41 Found 1 DVD-ROM and 1 DVD+RW!
    I 10:34:12 Operation Started!
    I 10:34:12 Source File: D:\Games\grand turismo 3\GRAN TURISMO 3.MDS
    I 10:34:12 Source File Sectors: 1,893,872 (MODE1/2048)
    I 10:34:12 Source File Size: 3,878,649,856 bytes
    I 10:34:12 Destination Device: [1:0:0] HP DVD Writer 300c EK24 (F:)
    I 10:34:12 Destination Media Type: DVD+R (Disc ID: AML-001-00) (Speeds: 2.4x, 4x)
    I 10:34:12 Destination Media Sectors: 2,295,104
    I 10:34:12 Write Mode: DVD
    I 10:34:12 Write Speed: MAX
    I 10:34:12 Test Mode: No
    I 10:34:12 BURN-Proof: Enabled
    I 10:34:13 Filling Buffer...
    I 10:34:22 Writing LeadIn...
    I 10:34:26 Writing Image...
    W 10:34:55 Failed to Write Sectors 29856 - 29887 - Write Error
    W 10:34:55 Retrying (1 of 20)...
    (2 of 20,3 ,3 ,,,10, .,,,,,19 of 20)
    W 10:34:56 Retry Failed - Invalid Address For Write
    W 10:34:56 Retrying (20 of 20)...
    W 10:34:56 Retry Failed! - Invalid Address For Write
    E 10:54:32 Failed to Write Sectors 29856 - 29887 - Invalid Address For Write
    I 10:54:32 Synchronising Cache...
    I 10:54:32 Closing Track...
    I 10:54:41 Finalising Disc...
    E 10:54:54 Failed to Write Image!
    E 10:54:54 Operation Failed! - Duration: 00:20:41
    I 10:54:54 Average Write Rate: 49 KB/s (0.0x) - Maximum Write Rate: 2,133 KB/s (1.5x)


    and this is the error i got too.



    I/O Error!

    Device:[1:0:0]HP DVD Writer 300c EK24

    ASPI SRB Status: 0x04
    Interpretation: SRB Completed With Error

    Host Adapter Status: 0x00
    Interpretation: Host Adapter Did Not Detect An Error

    Target Status: 0x02
    Interpretation: Check condition

    CDB: 2a 00 00 00 74 a0 00 00 20 00
    Interpretation: Write (10) - Sectors: 29856 - 29887

    Sense Area: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 00 00 00 00 01 02 03 05 06 07 00 00 00 00 00 00
    Interpretation: Invalid Address For Write
    I have a ps2 slim
    w/swap disk
    I use dvd+r
     
  2. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    ps. I had Nero 6.? and hp burning softW.
    I uninstalled these 2 progs.
    same error befor and after
     
  3. Jizmak

    Jizmak Regular member

    Joined:
    Dec 27, 2004
    Messages:
    2,584
    Likes Received:
    0
    Trophy Points:
    46
    YOUR MEDIA IS THE PROBLEM
    Your DISK ID IS AML (Garbage media very unreliable)
    AND IT WONT BURN AT 2x


    The following list is in preference order. The best discs are near the top of the list. The discs at
    the bottom of the list are suitable only for a landfill.

    Almost flawless burns with 95-100% reliable results:
    PVC = Pioneer = (-R)(-RW)
    MXLRG01, MXLRG02 = Maxell = (-R) ... be aware of unbranded fakes
    MCC = Mitsubishi Chemicals = (-R)<-----------------VERBATIM MY CHOICE #1
    TDKG02 = TDK Corp = (-R) ... be aware of unbranded fakes
    TAIYOYUDEN or YUDEN = Taiyo Yuden = (-R)<--------------FUJIFILM (made in japan) MY CHOICE #2

    Decent discs, though not perfect, about 85-95%
    success rate:

    RICOHJPN = Ritek or Ricoh = (+R)
    SONYD04 = Sony = (-R) ... be aware of unbranded fakes
    PRODISC = Prodisc Media = (+RW)
    INFODISC = Infodisc Media = (+RW)
    RITEKG04 = Ritek = (-R)
    RITEKG03 = Ritek = (-R)
    OPTODISC = Optodisc = (-R)

    Quality can be very questionable, about 50-80% success rate:

    LEADDATA or LD01 or LD or LEDA = Lead Data = (-R)(-RW)
    PRINCO = Princo = (-R)(-RW)
    RITEK = Ritek = (-RW)
    ONIDTECH = OnidTech = (-R)

    Pathetic garbage media, landfill material, about 0-50% success rate:

    RITEKG01, RITEKG02 = Ritek = (-R)
    PIODATA = Lead Data = (-R) ... often sold as "Pioneer OEM" but that's false
    Unbranded PIO = Fake Pioneer = (-R) ... often sold as "Pioneer OEM" but that's false
    Unbranded SONY = Fake Sony = (-R)
    Unbranded MXL = Fake MXL = (-R)
    ACCU = Unknown OEM = (-R)
    LONGTEN = Unknown OEM = (-R)
    AML = (+R)(-R)
    AN31, AN32, ANWELL, AN30 = Unknown OEM = (-R)
    OPTODISC = Optodisc = (+R)(+RW)
    MATRIX = Unknown OEM = (-R)
    CMC = CMC Magnetics = (+R)(-R)
    ANYTHING ELSE = Unknown OEM or NEW


    Use Quality Media I use
    Verbatim dvd+r 8x 100 pack ( 24.99 )
    http://www.amazon.com/exec/obidos/ASIN/B0002IQ1I0/slickdeals/104-0984492-0108766


    HERES HOW I COPY MY BACKUPS

    BURN AT NO MORE THAN 2x<-----IMPORTANT
    TURN OFF ANY BACKGROUND PROGRAMS

    1. Take the ps2 game put it in the dvd rom or dvd burner, your choice.

    2. open the dvd decryptor program then go to to tool bar and hit MODE>ISO>READ. Then choose the correct dvd drive that the game is in as the "source". Also choose where you want the files to be stored on the pc hdd. THEN CLICK DECRYPT , or the huge graphical picture at the bottom of the program which makes it run. The game is now copying to your HDD. Take the game out when finished (it might take a while).

    3. Go to the same tab in dvd decryptor and choose MODE>ISO>WRITE. This will then let you look for the files you just created in step 2. Select the file that you just created. (There is only 2 files creadted so pick the .mds) (The smaller file)Then click WRITE, make sure there is blank DVD in the drive.
     
    Last edited: Jan 14, 2005
  4. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
  5. Jizmak

    Jizmak Regular member

    Joined:
    Dec 27, 2004
    Messages:
    2,584
    Likes Received:
    0
    Trophy Points:
    46

    I use both of those And i can verify
    They are both EXCELLENT for ps2 backups.
     
  6. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,867
    Likes Received:
    0
    Trophy Points:
    66
    Burn at 1x if possible, 2x if 1x isn't possible. NEVER 4x! Maybe I read your error log wrong, but it appears as if it tried to write the disc at the same time it tried to read the original. I wasn't even aware that DVD Decrypter could do that, but if it can, don't. Movies sometimes have problems going disc to disc, games definitely will.
     
  7. Jizmak

    Jizmak Regular member

    Joined:
    Dec 27, 2004
    Messages:
    2,584
    Likes Received:
    0
    Trophy Points:
    46
    10:34:12 Source File: D:\Games\grand turismo 3\GRAN TURISMO 3.MDS

    no the source was on hd.

    the problem was his disks didnt support 1x
    (And they werent that good either)

    10:34:12 Destination Media Type: DVD+R (Disc ID: AML-001-00) (Speeds: 2.4x, 4x)

    Just try burning it at 2.4
    (still dont think they will work right until
    you get better media, but good luck)
     
  8. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    tried same disk at friends, worked good.
    i can't even burn cd's and more.
    i don't know what when wrong.
     
  9. hursty

    hursty Active member

    Joined:
    Nov 22, 2004
    Messages:
    4,618
    Likes Received:
    1
    Trophy Points:
    66
    looks likes to me the media you use is not compatible with the burner you use.how long have you had the burner?
    if you are competant pc user,try updating your firmware.
    the problem with HP300 is that you can only write to dvd+r,so you cant even try dvd-r.
    like jizmak suggeted,change your media,and make it good quality.
     
    Last edited: Jan 17, 2005
  10. R2G2

    R2G2 Guest

    Sorry for being thick, but if a disk says 4x, can you not burn it at 1, 2 or 4x?

    I've suddenly been getting the same problem (in out errors when verifying, and they are all coasters). Eg: "E 11:36:45 Failed to read Sector 441696 - The request could not be performed because of an I/O device error."


    I'm using the same DVDs as I always have, and they've worked until recently - Manufacturer ID: RITEKG05
     
    Last edited by a moderator: Jan 17, 2005
  11. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    the disk are good! they are +r plays fine "the frist one I burnt, and the one I did at a friends" I try any disk in it now, and it wont burn "dvd+r or cd's games moives or music" it dose read disk.
    Dose anyone know if "EK24" is the new frimware?
    plus I have an internal hooked up external.
    So how dose one up date an hp burner with HP's Ms-dos installer? It dose not find the drive.<---drivers for the usb 2.0 ide are not loaded when HP's updater boots to dos prompt!!
     
    Last edited: Jan 17, 2005
  12. r0c0

    r0c0 Guest

    what media(brand) did u use cuz i cant see that anywere...
     
  13. hursty

    hursty Active member

    Joined:
    Nov 22, 2004
    Messages:
    4,618
    Likes Received:
    1
    Trophy Points:
    66
    i have never heard of them either
    (Disc ID: AML-001-00
     
  14. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    I'm running a laptop, with a usb 2.0 notebook card, and an IDE to USB 2.0 convertor. the hp firmware dob not find my burner "through the convertor". I hooked up the convertor at a friends and have burnt 6 backups. Same firmware. ah ah help? any ideas?
    ps.
    we both have xp
     
  15. Jizmak

    Jizmak Regular member

    Joined:
    Dec 27, 2004
    Messages:
    2,584
    Likes Received:
    0
    Trophy Points:
    46
    I 10:33:40 Microsoft Windows 98 SE
    W 10:33:40 Drive C:\ (FAT32) does not support single files > 4 GB
    W 10:33:40 Drive D:\ (FAT32) does not support single files > 4 GB
    I 10:33:40 Initialising ASPI

    The error you posted shows
    Microsoft Windows 98 SE


    What media are you using.
    Cheap media could be the problem.

     
  16. Metosky

    Metosky Member

    Joined:
    Jan 10, 2005
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    16
    I'm not getting any errors any more. I have xp now.
    I can get it to burn now with "DVD Decrypter Version 3.5.2.0" but it is writing at 0kps/0.0x to 12kps/0.1x
    and I dont want to wait 2 days for a dvd to burn.
    but "THE MEIDA IS GOOD!!" I have burnt 15 backups at a friends with this media and same burner, not the same kind of burner, but my burner.
    Some one told me it could be is some settings. but where are these settings? I've hunted all over the hard drive but i have not found any setting to change anything with the burner.
    .
    .
    .
    Any Ideas?
    ps.
    I have had a hp dvd300i but now I got a hp630c
     
    Last edited: Oct 28, 2005

Share This Page