Hi Just received my usbpro. I've installed 0.18 fw with update tool and drivers. USBPRO now shows up in JF and in device manager which is great. However, still can't get it to recognise Hit 79. I ensure port 0*000 is set and have tried with usb only box checked.(green light goes red-yes) I've treble checked my connections to and from usb pro and CK3i but can't find anything wrong. I've also made sure bootloader switch is set to off. I've tried with mode B button down (blue light) and up (red light). It's like the drive has died but it was working when I was trying with VIA card and onboard sata a few weeks ago (just couldn't get JF to play audio unlock CD). The only thing I've done recently was changed the laser but that seems to have made matters worse! I've checked the pcb and ribbon connectors in the drive and all seems fine. Sure I'm not the first one to experience these probs but am getting a bit desperate now (for the sake of my son!) Thanks for your time. BTW I've tried a few different usb ports but that couldn't be the problem as usb is recognised but drive isn't.