HI SHOEY, I AM FACED WITH A NEW PBLM LATELY.MY HO WRITER 9100 SERIES IS BEHAVING STRANGELY. I STARTED GETTING POWER CALIBRATION NOW. I WAS FACED WITH SIMILAR PBLM BEFORE WITH MY BENQ WRITER.THIS HP WRITER WAS WORKING FINE FOR THE PAST 3 YEARS. I THINK I HAVE SOME PBLM WITH MY SYSTEM.I INSTALLED THE LATEST ASPI LAYERS(4.71). I GET SOME STRANGE NOISE FROM THE DRIVE. THE DRIVE TRA GETS STUCK SOMETIMES. I CANNOT BURN A CD PROPERLY. I USE NERO 5.5.10.15. BURN AT ONCE DOESN'T SUPPORT MY DRIVE. PLS HELP ME.AS SOON AS POSSIBLE RK
Right click My Computer>properties>hardware>device manager>click the + beside dvd\cd-rom drives. Do you see any "yellow icons? With your mouse point on HP 9100= double click. Look in the General tab folder to see if this device is working properly. If it is have you tried to burn to a cdrw? Shoey
HP.... that brings up the name Phillips for some reason.... and Phillips combined with Power Calibration error brings up graveyards for some reason. Um buddy if you are getting power calibration errors, it might actually be that your burner is on its way out. Try burning and erasing some RW discs. If that doesnt work.....
HP cd burners are made by Sony so if you are still having troubles maybe your last option would be to flash your HP with current (or updated) firmware m8. Shoey
Ya i know its just that i have had very bad experience with HP burners lol... almost as bad as LG/Phillips even.
Dear Shoey, I can't burn a cd on my hp writer 9100. after burning 2 cd's i get either reset error or power calibration error. i tried in WIN XP.but the aspi layers are corrupted. i installed the latest ASPI layers(4.71).But it says wowset.exe is missing. I received the following error message from NERO 5.5.10.15. RK HOME Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/02 4:03:58 PM Nero Version: 5.5.10.15 Recorder: <HP CD-Writer+ 9100c> Version: H2,1 - HA 0 TA 0 - 5.5.10.15 Adapter driver: <ESDI_506> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HP CD-Writer+ 9100c>Version: H2,1 - HA 0 TA 0 - 5.5.10.15 Adapter driver: <ESDI_506> HA 0 Bus Type : default (0) -> ATAPI, detected: ATAPI HP CD-Writer+ 9100c (Target 0, I: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 247MB (253392kB) Free physical memory: 0MB (28kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: Off 29.9.2003 Video CD 2:06:41 PM #1 Text 0 File Isodoc.cpp, Line 7495 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 2 / XA ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:06:41 PM #2 Text 0 File Reader.cpp, Line 115 Reader running 2:06:41 PM #3 Text 0 File Writer.cpp, Line 123 Writer HP CD-Writer+ 9100c running 2:06:41 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4546 First writeable address = 0 (0x00000000) 2:06:41 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4546 First writeable address = 0 (0x00000000) 2:06:41 PM #6 Text 0 File Burncd.cpp, Line 3717 Turn on Disc-At-Once, using CD-R/RW media 2:06:41 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE2_2336 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 1107 (1107) = #1107/0:14.57 relocatable, CD pos for caching/writing not required/required, no patch infos 1: TRM_DATA_MODE2_2336 (Music 02) 2 indices, index0 (150) not provided original CD pos #0 + 209831 (209831) = #209831/46:37.56 relocatable, CD pos for caching/writing not required/not required, no patch infos -------------------------------------------------------------- 2:06:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 211 Last possible write address on media: 359847 (79:59.72) Last address to be written: 211087 (46:56.37) 2:06:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 216 Write in overburning mode: FALSE 2:06:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 1630 Recorder: HP CD-Writer+ 9100c; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 2:06:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder HP CD-Writer+ 9100c for write in raw writing DAO infos: ========== MCN: TOCTYPE: 0x20 Session Closed, CD fixated Tracks 1 to 2: TRM_DATA_ULTRARAW_MODE2, 2368/0x4, ISRC "", FilePos 0 355200 2976576 TRM_DATA_ULTRARAW_MODE2, 2368/0x4, ISRC "", FilePos 2976576 3331776 500211584 2:06:41 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 1107 (1107) = #1107/0:14.57 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_ULTRARAW_MODE2, 2368, config 0x4, wanted index0 0 blocks, length 1107 blocks [HP CD-Writer+ 9100c] 1: TRM_DATA_MODE2_2336 (Music 02) 2 indices, index0 (150) not provided original CD pos #0 + 209831 (209831) = #209831/46:37.56 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_DATA_ULTRARAW_MODE2, 2368, config 0x4, wanted index0 0 blocks, length 209831 blocks [HP CD-Writer+ 9100c] -------------------------------------------------------------- 2:06:41 PM #13 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 2:06:42 PM #14 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 2:06:42 PM #15 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 8x (1,200 KB/s) 2:06:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 2:06:42 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #1257 2:06:42 PM #18 Text 0 File Mmc.cpp, Line 13046 StartDAO : CD-Text - Off 2:07:30 PM #19 SCSI -1114 File Cdrdrv.cpp, Line 1407 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x034A7000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x05 0xC5 0x46 0x13 0x00 0x00 0x00 0x00 0x29 0x00 2:07:30 PM #20 MMC -1114 File Writer.cpp, Line 331 Reset occurred 2:07:30 PM #21 Text 0 File ThreadedTransfer.cpp, Line 219 all writers idle, stopping conversion 2:07:30 PM #22 Text 0 File ThreadedTransfer.cpp, Line 213 conversion idle, stopping reader 2:07:31 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1203 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x05 0xC5 0x46 0x13 0x00 0x00 0x00 0x00 0x29 0x00 2:07:42 PM #24 SCSI -1114 File Cdrdrv.cpp, Line 1203 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x05 0xC5 0x46 0x13 0x00 0x00 0x00 0x00 0x29 0x00 2:07:44 PM #25 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 8x (1,200 KB/s) 2:07:44 PM #26 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated 2:07:54 PM #27 SCSI -1079 File Cdrdrv.cpp, Line 1203 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x53 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x13 0x00 0x00 0x00 0x00 0x53 0x00 Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (093), size=197984 bytes, created 6/22/00 2:50:00 AM File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1034), size=20047 bytes, created 6/20/00 9:53:22 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 6/10/99 11:34:42 AM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec) Registry Keys:
Dear Shoey, I can't burn a cd on my hp writer 9100. after burning 2 cd's i get either reset error or power calibration error. i tried in WIN XP.but the aspi layers are corrupted. i installed the latest ASPI layers(4.71).But it says wowset.exe is missing. I received the following error message from NERO 5.5.10.15. RK HOME Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/02 4:03:58 PM Nero Version: 5.5.10.15 Recorder: <HP CD-Writer+ 9100c> Version: H2,1 - HA 0 TA 0 - 5.5.10.15 Adapter driver: <ESDI_506> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HP CD-Writer+ 9100c>Version: H2,1 - HA 0 TA 0 - 5.5.10.15 Adapter driver: <ESDI_506> HA 0 Bus Type : default (0) -> ATAPI, detected: ATAPI HP CD-Writer+ 9100c (Target 0, I: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ? Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 247MB (253392kB) Free physical memory: 0MB (28kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: Off 29.9.2003 Video CD 2:06:41 PM #1 Text 0 File Isodoc.cpp, Line 7495 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 2 / XA ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:06:41 PM #2 Text 0 File Reader.cpp, Line 115 Reader running 2:06:41 PM #3 Text 0 File Writer.cpp, Line 123 Writer HP CD-Writer+ 9100c running 2:06:41 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4546 First writeable address = 0 (0x00000000) 2:06:41 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4546 First writeable address = 0 (0x00000000) 2:06:41 PM #6 Text 0 File Burncd.cpp, Line 3717 Turn on Disc-At-Once, using CD-R/RW media 2:06:41 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE2_2336 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 1107 (1107) = #1107/0:14.57 relocatable, CD pos for caching/writing not required/required, no patch infos 1: TRM_DATA_MODE2_2336 (Music 02) 2 indices, index0 (150) not provided original CD pos #0 + 209831 (209831) = #209831/46:37.56 relocatable, CD pos for caching/writing not required/not required, no patch infos -------------------------------------------------------------- 2:06:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 211 Last possible write address on media: 359847 (79:59.72) Last address to be written: 211087 (46:56.37) 2:06:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 216 Write in overburning mode: FALSE 2:06:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 1630 Recorder: HP CD-Writer+ 9100c; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 2:06:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder HP CD-Writer+ 9100c for write in raw writing DAO infos: ========== MCN: TOCTYPE: 0x20 Session Closed, CD fixated Tracks 1 to 2: TRM_DATA_ULTRARAW_MODE2, 2368/0x4, ISRC "", FilePos 0 355200 2976576 TRM_DATA_ULTRARAW_MODE2, 2368/0x4, ISRC "", FilePos 2976576 3331776 500211584 2:06:41 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 1107 (1107) = #1107/0:14.57 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_ULTRARAW_MODE2, 2368, config 0x4, wanted index0 0 blocks, length 1107 blocks [HP CD-Writer+ 9100c] 1: TRM_DATA_MODE2_2336 (Music 02) 2 indices, index0 (150) not provided original CD pos #0 + 209831 (209831) = #209831/46:37.56 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_DATA_ULTRARAW_MODE2, 2368, config 0x4, wanted index0 0 blocks, length 209831 blocks [HP CD-Writer+ 9100c] -------------------------------------------------------------- 2:06:41 PM #13 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 2:06:42 PM #14 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 2:06:42 PM #15 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 8x (1,200 KB/s) 2:06:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 2:06:42 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #1257 2:06:42 PM #18 Text 0 File Mmc.cpp, Line 13046 StartDAO : CD-Text - Off 2:07:30 PM #19 SCSI -1114 File Cdrdrv.cpp, Line 1407 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x034A7000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x05 0xC5 0x46 0x13 0x00 0x00 0x00 0x00 0x29 0x00 2:07:30 PM #20 MMC -1114 File Writer.cpp, Line 331 Reset occurred 2:07:30 PM #21 Text 0 File ThreadedTransfer.cpp, Line 219 all writers idle, stopping conversion 2:07:30 PM #22 Text 0 File ThreadedTransfer.cpp, Line 213 conversion idle, stopping reader 2:07:31 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1203 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x05 0xC5 0x46 0x13 0x00 0x00 0x00 0x00 0x29 0x00 2:07:42 PM #24 SCSI -1114 File Cdrdrv.cpp, Line 1203 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x05 0xC5 0x46 0x13 0x00 0x00 0x00 0x00 0x29 0x00 2:07:44 PM #25 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 8x (1,200 KB/s) 2:07:44 PM #26 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated 2:07:54 PM #27 SCSI -1079 File Cdrdrv.cpp, Line 1203 SCSI Exec, HA 0, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x53 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x13 0x00 0x00 0x00 0x00 0x53 0x00 Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (093), size=197984 bytes, created 6/22/00 2:50:00 AM File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1034), size=20047 bytes, created 6/20/00 9:53:22 PM File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 6/10/99 11:34:42 AM File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec) Registry Keys:
I concur m8. Consider a Asus(52x), LiteOn(52x), Plextor Premuim cd burner or the Plextor PX-708A DVD-Burner as a replacement. Shoey
