1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hyundai discs

Discussion in 'DVD±R media' started by luvics, Jan 17, 2005.

  1. luvics

    luvics Member

    Joined:
    Jun 3, 2004
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    16
    Anyone recommend these discs for DVD-R 4x???

    I am currently using a Pioneer A06 106D burner and the amount of problems I have had with it.

    Let us know. Cheers.
     
  2. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Hello luvics, I have heard about them but haven't seen any posts about them.

    What kind of problems are you having on your pioneer?

    I don't burn a lot of -r's but if I find the maxell -4x yellow tops on sale,I grab them up.These burn great,play great in my stand alones, And they allow me to re-rip from them.When they are on sale,they run $10.00 for 25 pack spindle.
     
  3. luvics

    luvics Member

    Joined:
    Jun 3, 2004
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    16
    Hi Saugmon, the problem I have is when burning ISO's through Nero... I get an error come up saying "Internal Target Failure". Now this only happens about 50% of the time. I have never had a problem with it before until now (when I changed brand media)

    I won't be staying with Hyundai I don't think.
    Just wanted to know what other users thought.

    So you recommend maxell on your Pioneer? What website can I use to buy these from in the UK?

    Another thing I had problems with is burning DVD+'s on the pioneer, the discs would never finalise.
     
  4. saugmon

    saugmon Senior member

    Joined:
    Oct 9, 2004
    Messages:
    6,064
    Likes Received:
    1
    Trophy Points:
    116
    Hey luvics, I am not sure about buying maxell's in the UK.Shipping from here to there would probably cost an arm and a leg.I am here in the USA.I got a benq burner,16x dual layer,kypermedia +8x, and another + cyberhome dvd recorder on my tv.

    I saw a thread on that the other week on ty's in UK.You might have to go back in the dvd-r media forum.

    Not finalizing on dvd+r's is also a weird issue.Poor media can do a whole lot of crap on dvd burning.I am not a nero expert,it works great for me.

    What media were you using before these problems started?
    Did you try slowing down the burn speed?
     
  5. luvics

    luvics Member

    Joined:
    Jun 3, 2004
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    16
    I was just using a blank/unbranded grade a media before. I think the grade a is the difference you see.

    I'll have a look for that TY make, (what's the full name of it again?)

    I tried cleaning the drive, slowing down the speeds everything and it still happens. It must be the media. However saying that, I burnt a disc in safe mode (4x) and it burnt perfectly although it took about 1/2 hour to burn.

    Very wierd!
     
  6. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    5,088
    Likes Received:
    0
    Trophy Points:
    96
    It's Probably not the media.
    Bad media still burns it's just the quality isnt that good, but newer media could mean your Drive needs to have the firmware updated go to the manufactures web site that made your drive and get the latest Firmware and give it a try then. I suspect this is your problem
     
  7. luvics

    luvics Member

    Joined:
    Jun 3, 2004
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    16
    Hi BB, I tried this and got the message "Available target is not found".

    This is the error message i get when burning through DVD Decrypter

    I 19:11:02 DVD Decrypter Version 3.5.2.0 started!
    I 19:11:02 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
    I 19:11:02 Initialising SPTI...
    I 19:11:02 Searching for SCSI / ATAPI devices...
    I 19:11:03 Found 1 CD-RW and 1 DVD±RW!
    I 19:12:01 Operation Started!
    I 19:12:01 Source File: C:\Dvds\MontyP.iso
    I 19:12:01 Source File Sectors: 2,285,888 (MODE1/2048)
    I 19:12:01 Source File Size: 4,681,498,624 bytes
    I 19:12:01 Destination Device: [1:0:0] PIONEER DVD RW DVR-106D 1.07 (D (ATA)
    I 19:12:01 Destination Media Type: DVD-R (Disc ID: SKC Co.,Ltd.) (Speeds: 1x, 2x, 4x)
    I 19:12:02 Destination Media Sectors: 2,298,496
    I 19:12:02 Write Mode: DVD
    I 19:12:02 Write Speed: MAX
    I 19:12:02 Test Mode: No
    I 19:12:02 BURN-Proof: Enabled
    I 19:12:02 Filling Buffer...
    I 19:12:02 Writing LeadIn...
    W 19:12:05 Failed to Write Sectors 768 - 799 - Unknown (Internal Target Failure) (0x44, 0xD9)
    W 19:12:05 Retrying (1 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (2 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (3 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (4 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (5 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (6 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (7 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (8 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (9 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (10 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (11 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (12 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (13 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (14 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (15 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (16 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (17 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (18 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (19 of 20)...
    W 19:12:05 Retry Failed - Invalid Address For Write
    W 19:12:05 Retrying (20 of 20)...
    W 19:12:05 Retry Failed! - Invalid Address For Write
    E 19:12:08 Failed to Write Sectors 768 - 799 - Invalid Address For Write
    I 19:12:08 Synchronising Cache...
    E 19:12:08 Failed to Write Image!
    E 19:12:08 Operation Failed! - Duration: 00:00:07
    I 19:12:08 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 346 KB/s (0.2x)
     
  8. fancymojo

    fancymojo Guest

    luvics go to dvd decrypter formus and ask them for help post your log there and they will help
     
  9. luvics

    luvics Member

    Joined:
    Jun 3, 2004
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    16
    Hi mojo, where can I find these forums? I can only see the Dvd Shrink and one2one forum, No Decrypter one there?
     
  10. luvics

    luvics Member

    Joined:
    Jun 3, 2004
    Messages:
    54
    Likes Received:
    0
    Trophy Points:
    16
  11. ScubaPete

    ScubaPete Senior member

    Joined:
    Mar 13, 2003
    Messages:
    6,324
    Likes Received:
    0
    Trophy Points:
    116
    Actually you found one of our forums that can handle it BUT next time - here is DVDD's forum -

    http://forum.dvddecrypter.com/index.php?

    That is the Home of "LightingU.K." the author of DVDD.

    As for your problem, you need to get your Drive system up-to-date.

    There are some things we should check as they have a direct influence over how our drive behaves -

    1. Let's check for up-to-date Firmware for your burner.

    "OK, so what is this "Firmware" garbage?" Fair question. Firmware is a "tutor" who's job it is to eliminate any "bugs" found in your drive and to "introduce" your burner to all the different kinds of media to your burner is likely to run into and to tell your burner a little bit about it. What type of media it is and at what speed to burn it. As new media is introduced OR, as the Mfgrs of your burner find new ways to use it, new firmware updates OR "Flash upgrades" come out to "school" your burner, keeping it up-to-date. It's good to keep your burner up-to-date as it "tweaks" your burner and keeps it operating at peak performance.

    Of major Importance – When dealing firmware, you must match your burner's exact model with the proper Firmware. Trying to "Flash" your burner with something "Close" won't do it. It must be the exact firmware for your drive. ("Flashing" is what the installation is referred to when you put the firmware into your drive.) Trying to "Flash" your drive with some other drive's firmware can ruin your drive.

    At the bottom of the page look for "What's my firmware? - Try this little tool I found," Download this tool and check out your Firmware's health (up-to-date wise). You can probably get a current upgrade there also –

    http://flashman.rpc-1.com/

    Firmware page -

    http://forum.rpc1.org/dl_all.php

    Always check your burner's Mfgr's "Support" section to see if some newer Firmware is there -

    Firmware, You can't burn without it -



    Now we need to see if we have a working ASPI Layer.

    "Yea right, and ASPI stands for Another Stupid Piece of Insanity, right ?" No, not quite, it stands for "Advanced SCSI Programming Interface". "Well that tells me nothing, what's it do ?" That's a much easier question to answer. It is kind of a "translator" allowing your software to talk your hardware in a manner that your hardware will understand. Let's imagine an Earthman trying to talk to a rock. Now, think of a sledgehammer as being the interface. With the interface in play, the Earthman can tell the rock to disperse into gravel no matter what planet the rock is from, OK ? Good, let's see if we have a sledgehammer –

    2. Check for your ASPI Layer. If one isn't present, we'll need to get one and reinstall it, then reboot our PC to allow it to "settle in".

    ASPI Checker -
    http://www.adaptec.com/worldwide/su...oduct/EZ-SCSI_5.0&filekey=aspichk.exe&sess=no

    Force 1.8 ASPI Layer -

    http://forceaspi18.w.interia.pl/


    Lastly, when did you last defrag your Hard Drive (HD) ? If you have to stop and think about the last time you did it, then it's way, way overdue. Here we go, (Start, All Programs, Accessories, System Tools, Disk Defragmenter. When it opens, choose your HD, analyses it to see where we stand then if you need it (you probably will) choose Defragment.).

    After you finish doing it now you might want to think about having "Scheduled Tasks" in your Control Panel do it for you on a daily basis.

    A fragmented HD not only drastically slows down your system but it can cause all number of things to happen inside your PC, a messed up burn being one of them.

    Once we've done that, our DVD burner should operate at peak efficiency :D)

    Cheers,

    Pete

    Now let's see if everything will work together the way we want it to, OK ?

    Give it a test run and let us know how you make out -
     

Share This Page