Anyone have an idea why dvd xcopy would stop writing to my nec 1300a all of a sudden? I burnt 2 backups and then on third no dice. Then tried burning one that I did before before, didnt work.Ran check on drive came up fine. Read Scuba Petes review on shrink decided to try it. Two other problems now.Would'nt burn, message said my nero wouldnt burn because I have microsoft service pack 2. So I downloaded nero updates 1 & 2. It started to write then quit after 20 seconds or so. Thought xcopy might work now that nero updated nope again. If I ever shrink what button do you hit to burn after you edit movie? Then do you have to keep creating folders each time a burn fails? Help!
If this happened after you installed SP2, remove it. http://support.microsoft.com/kb/875350 It's not really all that important. Then just follow the guide/s for shrink. I belive you only need one folder for Shrink. It will act a temp folder and the info will be deleted every time you create a new backup.
I'm using SP2 here, with the Nero updates. No problem. So by itself, I don't see how SP2 could be the problem. On the problem with dvd xcopy, you really need to be more specific than just "no dice" and "nope again." At least with Nero, you tell us that it "started to write then quit after 20 seconds or so." But are really sure it was writing? Got a nero log file? Did it just CTD (crash to the desktop), abend with an error message, or what? How can we help you when we really don't know what is happening? Details, details, details. Specifics, specifics, specifics.
Yes xcopy worked after ms service pac2 was installed I think I should give up on xcopy and try to get shrink to work. Less confusing for me. Shrink starts to record to dvd-r (read light is on and drive is running) It just stops and says error ,then the error box disappears.I believe it stops just before it actually starts the write of the backup& after the disk prep but I dont know that for sure.I know the backup is on my hard drive. I cant find an error log. The drives check out with both microsoft and nero. They are set on zone 1. One thing though it says no aspi installed. I am using fugifilm dvd+ &- media it used to work fine Very sorry I double posted. It won't happen again.
here it is finaly: Serial removed Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM Nero API version: 6.6.0.6 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <_NEC DVD_RW ND-1300A> Version: 1.06 - HA 1 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG DVD-ROM SD-616T D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 766MB (785200kB) Free physical memory: 426MB (436948kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.1.2005 NeroAPI 11:08:06 PM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 11:08:06 PM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 11:08:06 PM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 11:08:07 PM #4 Text 0 File Reader.cpp, Line 127 Reader running 11:08:07 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:08:07 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 11:08:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 11:08:07 PM #8 Text 0 File Burncd.cpp, Line 3155 Turn on Disc-At-Once, using DVD media 11:08:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286175 (508:02.25, 4465MB) 11:08:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO 11:08:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: Prodis - cF01 Disc Application Code: 64, Disc Physical Code: 193 11:08:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:08:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 11:08:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286176 | lead-out | 1 | 0x41 | 0x00 11:08:07 PM #15 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 11:08:07 PM #16 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 11:08:07 PM #17 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 11:08:07 PM #18 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 11:08:07 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:08:07 PM #20 Text 0 File DVDR.cpp, Line 2300 Recording mode: Sequential Recording Mode 11:08:07 PM #21 Text 0 File Mmc.cpp, Line 21079 Set BUFE: Buffer underrun protection -> ON 11:08:07 PM #22 Text 0 File DVDR.cpp, Line 2441 Start write address at LBA 0 DVD high compatibility mode: Yes 11:08:07 PM #23 Text 0 File Cdrdrv.cpp, Line 8332 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:08:07 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x60 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:08:07 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1764 Illegal disc 11:08:07 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1764 Could not perform start of Disc-at-once 11:08:07 PM #27 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 11:08:07 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 11:08:07 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Since this question has kind of morphed into a shrink should i take this problem to the shrink forum as since I posted my error my string has gotten buried.It was my fault as I had trouble the error code. (it kept closing on me) Sorry all. Thanks
"11:08:07 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1764 Illegal disc" Says 'illegal disc'. But if it isn't, my bet it's still SP2.
11:08:07 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1764 Illegal disc What is an illegal disk? This is the write to disk isnt it? I have used fujifilm all along.
I was thinking that too (DRM = Microsuck's digital rights mgmt?) If it's just a commercial DVD you're ripping with DVDXCopy, you might want to fiddle around with the burning drivers (use Gear Networks drivers setting in Options instead of Nero). And use a rewritable until you figure out the problem.
How do you find options in dvdxcopy? I see in prefences a nero button but no gear networks. Did net search for gear networks & couldnt find. this whole problem thing is new to me as x copy has worked perfect for many backups. Would switch to shrink as most of you like it better but it has same error with disk.
How do you find options in dvdxcopy? I see in prefences a nero button but no gear networks. Did net search for gear networks & couldnt find. this whole problem thing is new to me as x copy has worked perfect for many backups. Would switch to shrink as most of you like it better but it has same error with disk.Have even bought any dvd no difference.
sorry for the studder I didnt think first one went thru. how can i get a copy of decrypter here in usa. maybe it will recognise illegal disk?
down loaded anydvd and clonedvd2. works perfect,easy to use. End of story. Thank you all for your ideas.
Turns out not end of story. Dogbomb recomended I use dvd-rw while i was figuring out whats wrong which I did. Thought I would try x copy again and it worked. Then I looked again at my disks and they were 8x in a box marked 4x.(fujifilm).Went and got correct fujifilm 4x and were back to normal. My nec nd1300a has 1.06 firmware. Does anyone know if there is an upgrade? will it then recognise 8x disks?