This is the log for the error that occurs after 70-80%. Any help would be appreicated NT-SPTI used Nero Version: 6.6.1.6 Internal Version: 6, 6, 1, 6d (Nero Express) Recorder: <Memorex DVD+-RAM 510L v1>Version: MWS7 - HA 1 TA 3 - 6.6.1.6 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CDRW/DVD SN-324F>Version: U203 - HA 1 TA 0 - 6.6.1.6 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2040AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CDRW/DVD SN-324F atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SAMSUNG CDRW/DVD SN-324F D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 164MB (168232kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.2.2007 DVD-Copy on the fly 3:59:01 PM #1 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:59:01 PM #2 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:59:01 PM #3 SPTI -1066 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xBB 00 FF FF 02 C2 00 00 00 00 00 00 Sense Area: 0xF0 00 05 00 00 00 00 0A 00 00 00 00 24 3:59:01 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 3:59:01 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 3:59:01 PM #6 Text 0 File Writer.cpp, Line 122 Writer Memorex DVD+-RAM 510L v1 running 3:59:01 PM #7 Text 0 File DVDCopy.cpp, Line 292 DVD Track-Information from source disc: Media Type: DVD+R S01 T01 Con 0x14 Start 0 Len 2283632 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 3:59:01 PM #8 Text 0 File DVDCopy.cpp, Line 405 Max -1 tracks of 1 allowed to copy 1: 0 - 2283632 = 2283632, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3:59:01 PM #9 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 3:59:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283631 (507:28.31, 4460MB) 3:59:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 3:59:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: Memorex DVD+-RAM 510L v1, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 3:59:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:59:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2283632 (2283632) = #2283632/507:28.32 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283632 blocks [Memorex DVD+-RAM 510L v1] -------------------------------------------------------------- 3:59:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [Memorex DVD+-RAM 510L v1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676878336, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283632 | lead-out | 1 | 0x41 | 0x00 3:59:01 PM #16 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:59:01 PM #17 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:59:01 PM #18 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5,540 KB/s) 3:59:01 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:59:01 PM #20 Text 0 File Cdrdrv.cpp, Line 8648 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:59:01 PM #21 Text 0 File DVDR.cpp, Line 6069 Drive: Memorex DVD+-RAM 510L v1 Book Type request [LO], rev 1: DVD-ROM Changing the Book Type was finished successfully, return code 0 3:59:01 PM #22 CDR -1207 File DVDR.cpp, Line 5496 Book Type automatically set to: DVD-ROM 3:59:01 PM #23 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 4:11:19 PM #24 SPTI -1047 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 00 00 1B 51 A0 00 00 20 00 00 00 Sense Area: 0xF0 00 05 00 00 00 00 0A 00 00 00 00 64 Buffer x073ad000: Len x10000 4:11:19 PM #25 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 4:11:19 PM #26 Text 0 File Reader.cpp, Line 367 Exception value: -1047 4:11:23 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:11:49 PM #28 Text 0 File DVDR.cpp, Line 6069 Drive: Memorex DVD+-RAM 510L v1 Book Type request [LO], rev 1: DVD+R Changing the Book Type was finished successfully, return code 0 4:11:49 PM #29 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5,540 KB/s)
Unless I'm very much mistaken, this optical drive is a DVD rom only.... I did a quick google/Yahoo on the drive model (just to be sure) and only came up with CD read and write----DVD read only memory. May I ask a silly question, have you ever backed up a DVD to another DVD with this drive? EDIT: Crap spelling.
Im having the exact same problem with My Nero. It stops at about 75% saying theres not enough disk room when at the beggining it states there should be. Ive been using Nero for a long time burning about 2 DVD's a week. All the settings are the same and I have already tried uninstalling and re-installing Nero. Im thinking I will try DVD shrink...
@murmle, At present we are trying to deal with bckicker's problem and by adding yours to the end of his thread makes it harder. I suggest you start a thread of your own, outlining your problem, Cheers. (It's known as hijacking and againsr forum rules)
I don't know if this well help or not but it will only take a minute to test. i had the same thing happen to me. it just stopped burning. could read fine cd and dvd fine. it turned out that id been messing with the power management on my motherboard bios and had disables it. i re enabled it and it started working as if nothing had even been wrong. cant hurt to try.
What changes have there been made to your rig, in the last fortnight, that would cause this issue? As kukujin states, any mods to Bios or other system settings, could very well be the problem. Cheers.
I noticed you were doing Nero Express "Quick Copy" burning as well as using an external burner: You should stop copying on the fly. Uncheck the "Quick Copy" box on the Source and Destination page. Use a slower (2.4X) burn speed. This should provide a lower data transfer rate which should help. Your "Failure to read data" error means that for some reason Nero could not read your source disc. Make sure the DVD you are copying is clean and scratch free.
Sorry it took me a while to reply, I haven't used my burner in the past couple weeks, or needed to, but I tried unchecking the quick copy option and it worked fine today. thanks to all that helped, i appreciate it.
