1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I used the tape and tisse mod do i need to do anything to the disc break...

Discussion in 'PS2 - Software boot discussion' started by ha9981, Apr 11, 2007.

  1. ha9981

    ha9981 Regular member

    Joined:
    Nov 7, 2006
    Messages:
    939
    Likes Received:
    0
    Trophy Points:
    26
    do i need to tape the disc break thing?
     
  2. ovrfiendx

    ovrfiendx Regular member

    Joined:
    Oct 19, 2005
    Messages:
    318
    Likes Received:
    0
    Trophy Points:
    26
    Yes the disk brake has to be disabled. I used a rolled up piece of paper to hold the break out of the way.
     
  3. ha9981

    ha9981 Regular member

    Joined:
    Nov 7, 2006
    Messages:
    939
    Likes Received:
    0
    Trophy Points:
    26
    i din but it still works. will it damage it somehow. because don't it go off when u close the lid?
     
  4. ovrfiendx

    ovrfiendx Regular member

    Joined:
    Oct 19, 2005
    Messages:
    318
    Likes Received:
    0
    Trophy Points:
    26
    Not exactly sure what you mean. Just push the disk stop to the side and insert a piece of paper in the slot to keep it from coming in contact with the disk. Make sure it is pushed in flush with the plastic so it does not interfere with the disc.

    Originally when the lid is closed a small piece of plastic(a stud attached to the lid) is inserted in a hole next to the disk break when this happens it disengages the disk break. When the lid is lifted the stud is removed and the brake engages to stop the disk from spinning. By inserting the paper in the break you are bypassing this so the break will never engage.
     

Share This Page