Having a few problems burning onto a DVD-R disc. I managed to do it to my last DVD+R disc ok but ive gone and got some DVD-R discs duhhhh!!! Im no expert so im thinking this is my problem! i looked at loads of post but can't locate one exactly the same as mine hence the new post but im also guesing i may have to do something with my firmware. Or should i simply take the discs back for + disks???? Here is my ERROR log please can you help!!! Many thanks!!! [15:40:45] NeroVision xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-**** [15:40:45] NeroVision Windows XP 5.1 [15:40:45] NeroVision IA32 [15:40:45] NeroVision WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:20:56 [15:40:45] NeroVision ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 [15:40:45] NeroVision NT-SPTI used [15:40:45] NeroVision Nero API version: 7.5.9.0 [15:40:45] NeroVision Using interface version: 7.0.5.6 [15:40:45] NeroVision Installed in: C:\Program Files\Nero\Nero 7\Core\ [15:40:45] NeroVision Application: ahead\NeroVision [15:40:45] NeroVision Internal Version: 7, 5, 9, 0 [15:40:45] NeroVision Recorder: <_NEC DVD_RW ND-2510A> Version: 2.54 - HA 1 TA 0 - 7.5.9.0 [15:40:45] NeroVision Adapter driver: <IDE> HA 1 [15:40:45] NeroVision Drive buffer : 2048kB [15:40:45] NeroVision Bus Type : default (0) -> ATAPI, detected: ? [15:40:45] NeroVision === Scsi-Device-Map === [15:40:45] NeroVision DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On [15:40:45] NeroVision CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On [15:40:45] NeroVision CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 fvdscsi Port 2 ID 0 DMA: Off [15:40:45] NeroVision === CDRom-Device-Map === [15:40:45] NeroVision _NEC DVD_RW ND-2510A D: CDRom0 [15:40:45] NeroVision FvF-Inc CDDVD-2003-200x E: CDRom1 [15:40:45] NeroVision ======================= [15:40:45] NeroVision AutoRun : 1 [15:40:45] NeroVision Excluded drive IDs: [15:40:45] NeroVision WriteBufferSize: 83886080 (0) Byte [15:40:45] NeroVision BUFE : 0 [15:40:45] NeroVision Physical memory : 1023MB (1048048kB) [15:40:45] NeroVision Free physical memory: 540MB (553540kB) [15:40:45] NeroVision Memory in use : 47 % [15:40:45] NeroVision Uncached PFiles: 0x0 [15:40:45] NeroVision Use Inquiry : 1 [15:40:45] NeroVision Global Bus Type: default (0) [15:40:45] NeroVision Check supported media : Disabled (0) [15:40:45] NeroVision 5.4.2007 [15:40:45] NeroVision NeroAPI [15:40:45] NeroVision 15:40:42 #1 Text 0 File SCSIPTICommands.cpp, Line 411 [15:40:45] NeroVision LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #2 ISO9660GEN -11 File Geniso.cpp, Line 3332 [15:40:45] NeroVision First writeable address = 0 (0x00000000) [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332 [15:40:45] NeroVision First writeable address = 0 (0x00000000) [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #4 Text 0 File Burncd.cpp, Line 3451 [15:40:45] NeroVision Turn on Disc-At-Once, using DVD media [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #5 Text 0 File DlgWaitCD.cpp, Line 306 [15:40:45] NeroVision Last possible write address on media: 2298495 (510:46.45, 4489MB) [15:40:45] NeroVision Last address to be written: 1893103 (420:41.28, 3697MB) [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #6 Text 0 File DlgWaitCD.cpp, Line 318 [15:40:45] NeroVision Write in overburning mode: NO [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #7 Text 0 File DlgWaitCD.cpp, Line 2903 [15:40:45] NeroVision Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R [15:40:45] NeroVision Disc Manufacturer: TTH02 - [15:40:45] NeroVision Disc Application Code: 64, Disc Physical Code: 193 [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #8 Text 0 File DlgWaitCD.cpp, Line 490 [15:40:45] NeroVision >>> Protocol of DlgWaitCD activities: <<< [15:40:45] NeroVision ========================================= [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821 [15:40:45] NeroVision Setup items (after recorder preparation) [15:40:45] NeroVision 0: TRM_DATA_MODE1 () [15:40:45] NeroVision 2 indices, index0 (150) not provided [15:40:45] NeroVision original disc pos #0 + 1893104 (1893104) = #1893104/420:41.29 [15:40:45] NeroVision relocatable, disc pos for caching/writing not required/ required [15:40:45] NeroVision -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1893104 blocks [D: _NEC DVD_RW ND-2510A] [15:40:45] NeroVision -------------------------------------------------------------- [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024 [15:40:45] NeroVision Prepare [D: _NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO [15:40:45] NeroVision DAO infos: [15:40:45] NeroVision ========== [15:40:45] NeroVision MCN: "" [15:40:45] NeroVision TOCType: 0x00; Session Closed, disc fixated [15:40:45] NeroVision Tracks 1 to 1: Idx 0 Idx 1 Next Trk [15:40:45] NeroVision 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3877076992, ISRC "" [15:40:45] NeroVision DAO layout: [15:40:45] NeroVision =========== [15:40:45] NeroVision ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ [15:40:45] NeroVision 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 [15:40:45] NeroVision 0 | 1 | 0 | 0x41 | 1893104 | 0 | 0x00 [15:40:45] NeroVision 0 | 1 | 1 | 0x41 | 1893104 | 0 | 0x00 [15:40:45] NeroVision 1893104 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #11 Text 0 File SCSIPTICommands.cpp, Line 209 [15:40:45] NeroVision SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #12 Phase 24 File APIProgress.cpp, Line 282 [15:40:45] NeroVision Caching of files started [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #13 Text 0 File Burncd.cpp, Line 4278 [15:40:45] NeroVision Cache writing successful. [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #14 Phase 25 File APIProgress.cpp, Line 282 [15:40:45] NeroVision Caching of files completed [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #15 Phase 36 File APIProgress.cpp, Line 282 [15:40:45] NeroVision Burn process started at 2.4x (3,324 KB/s) [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743 [15:40:45] NeroVision Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #17 Text 0 File DVDR.cpp, Line 3058 [15:40:45] NeroVision Recording mode: Sequential Recording Mode [15:40:45] NeroVision [15:40:45] NeroVision 15:40:42 #18 Text 0 File DVDR.cpp, Line 3214 [15:40:45] NeroVision Start write address at LBA 0 [15:40:45] NeroVision DVD high compatibility mode: Yes [15:40:45] NeroVision [15:40:45] NeroVision 15:40:43 #19 Text 0 File Cdrdrv.cpp, Line 9234 [15:40:45] NeroVision ---- DVD Structure: Physical Format Information (00h) ---- [15:40:45] NeroVision Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 [15:40:45] NeroVision Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) [15:40:45] NeroVision Disc Size: 120 mm, Maximum Rate: <not specified> (F h) [15:40:45] NeroVision Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable [15:40:45] NeroVision Linear Density: 0,267 um/bit, Track Density: 0,74 um/track [15:40:45] NeroVision Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) [15:40:45] NeroVision End Physical Sector Number of Data Area: 26127F h [15:40:45] NeroVision End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) [15:40:45] NeroVision Data in Burst Cutting Area (BCA) does not exist [15:40:45] NeroVision Start sector number of the current Border-Out: 2FE10 h [15:40:45] NeroVision Start sector number of the next Border-In: 2FFA0 h [15:40:45] NeroVision Media Specific [16..63]: [15:40:45] NeroVision 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... [15:40:45] NeroVision 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ......... [15:40:45] NeroVision 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ [15:40:45] NeroVision [15:40:45] NeroVision 15:40:43 #20 SPTI -1046 File SCSIPassThrough.cpp, Line 179 [15:40:45] NeroVision CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) [15:40:45] NeroVision Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) [15:40:45] NeroVision Sense Code: 0x30 [15:40:45] NeroVision Sense Qual: 0x05 [15:40:45] NeroVision CDB Data: 0x53 00 00 00 00 00 1C E2 F0 00 00 00 [15:40:45] NeroVision Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 [15:40:45] NeroVision [15:40:45] NeroVision 15:40:43 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1779 [15:40:45] NeroVision Illegal disc [15:40:45] NeroVision D: _NEC DVD_RW ND-2510A [15:40:45] NeroVision [15:40:45] NeroVision 15:40:43 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779 [15:40:45] NeroVision Could not perform start of Disc-at-once [15:40:45] NeroVision [15:40:45] NeroVision 15:40:43 #23 Phase 38 File APIProgress.cpp, Line 282 [15:40:45] NeroVision Burn process failed at 2.4x (3,324 KB/s) [15:40:45] NeroVision [15:40:45] NeroVision 15:40:43 #24 Text 0 File SCSIPTICommands.cpp, Line 254 [15:40:45] NeroVision SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME [15:40:45] NeroVision [15:40:45] NeroVision 15:40:44 #25 Text 0 File Cdrdrv.cpp, Line 10467 [15:40:45] NeroVision DriveLocker: UnLockVolume completed [15:40:45] NeroVision [15:40:45] NeroVision 15:40:44 #26 Text 0 File SCSIPTICommands.cpp, Line 411 [15:40:45] NeroVision UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL [15:40:45] NeroVision [15:40:45] NeroVision Existing drivers: [15:40:45] NeroVision File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32 [15:40:45] NeroVision File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22:16:24 [15:40:45] NeroVision File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 09:53:02 [15:40:45] NeroVision File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 21:23:54 (Prassi/Veritas driver for win 2K) [15:40:45] NeroVision Registry Keys: [15:40:45] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I'm not familiar with the firmware version you have on your burner. Illegal disk usually means the firmware doesn't recognize the disk. The 2510 is an older burner so if you're using newer media, that may be the problem. Where did you find the firmware for your 2510 or is this the original firmware? Did this burner come with your system? If so, what system? The Roxio CDRAL driver is also installed on your system. It has been known to cause conflicts in some configurations. I don't think it's causing the problem here, however. NEC burners loves them some Verbatim disks. Try to find some 8X Verbatims and see if they'll burn. Some burners just give up the ghost earlier for one format over the other.
Thanks for the reply laddyboy.... Where did i get my firmware you ask, i simply copied my drive name into google NEC DVD RW ND-2510A firmware and found a link to here http://tdb.rpc1.org/#ND2510A and loaded both 2.05 binaries and DOS flasher and 2.15 Binaries and DOS flasher. But none of these solved the problem. Yes this is the original burner thats built into my computer Here is my system info.... Microsoft Windows XP Home Edition Version 2002 Service Pack 2 Packard Bell Computer AMD Athlon(tm)XP 3000+ 2.09GHz, 1.00GB of RAM Ive had my computer about 2 years but only burned about 3 discs but this was music. Here is a picture you may find usefull.... NEC DVD RW ND-2510A INFODont know why there are 2 red X's next to the DVD - RAM Many thanks!!!!
Hi again. Nero is showing your burner firmware as version 2.54, a version that doesn't appear in the link to the DB firmware you cited that I can see. That's why I was curious about the where you got that firmware. The red X's just mean your burner doesn't support DVD RAM disks.
Sorry i didnt tell you that i updated it after i got the ERROR REPORT. Where can i go from here please!!! Many thanks!!!!
I agree with that screwy firmware version. Here's a link for the NEC 2510,but you have to watch out for which correct version you need: http://forum.rpc1.org/dl_firmware.php?download_id=1837 You'll see NEC/Fujitsu/IOdata/Mad Dog/and Dell. The non NEC fw updates would be the Rebadges. Similar drive,but different chip sets. You'll need the original firmware version if possible,to find out which NEC 2510A that you have. [bold]Disc Manufacturer: TTH02 -[/bold] These are -16x TDK and I see this code in a lot of nero logs. Drives have a harder time with this media. Why swich to dash when you said the plus format was ok? Being an older drive,you'll probably have to find some of the older 8x speed media. By not issueing firmware updates,manufacturers are telling us that we have to upgrade to the newer burners to be able to burn the faster 16x and higher media. Definitely take them back for some slower +8x media if possible.Don't throw away the ones you tried to burn. By the looks of your log,those discs that gave the no disc error-no actual burn took place so they should be ok. Look at the bottom of the disc to make sure there's no discoloration from the burn.
Thanks for the tips guys. It turns out it was a simple problem namely my DVD RW just didnt like the taste of the new discs i got lol i also ran a Nero cleaner!!! I know where to come next time i have a problem. Many thanks guys!!!
