1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Illegal Disc Message, nothing helps!

Discussion in 'DVD Shrink forum' started by ARose13, Jan 31, 2007.

  1. ARose13

    ARose13 Member

    Joined:
    Jan 31, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I have been burning for years. Now, I can't get anything to burn, it keeps giving me illegal disc error message. I used to brun with Office Depot discs, I ran out, I bought Fujifilm discs which wouldn't work. Then I went back and got Maxell discs, which I've used before, they won't work either! I have tried burning off pure video file... nothing works. I need some serious help. I've tried downloading the firmware etc, nothing is working. I can burn CDs... so it will read and write, I doubt it's the laser. I can't figure it out.


    Here is my Nero Log:

    1A20-022N-0530-1538-9943-0478*
    1A23-0091-3061-5373-2260-0128

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 2:03:36 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 7:33:42 PM
    Nero version: 6.3.1.29 (Nero Express)
    Recorder: <HP DVD Writer 420n> Version: 1.25 - HA 1 TA 0 - 6.3.1.29
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <JLMS XJ-HD166S >Version: DS14 - HA 1 TA 1 - 6.3.1.29
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 6Y160L0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HP DVD Writer 420n atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HP DVD Writer 420n D: CDRom0
    JLMS XJ-HD166S E: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047276kB)
    Free physical memory: 415MB (425176kB)
    Memory in use : 59 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)

    31.1.2007
    UDF/ISO compilation
    7:42:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
    DVD-Video files reallocation started

    7:42:59 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
    DVD-Video files reallocation completed (no file modified)

    7:42:59 PM #3 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    7:42:59 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
    DVD-Video files sorted

    7:42:59 PM #5 Text 0 File Reader.cpp, Line 126
    Reader running

    7:42:59 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    7:42:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    7:43:00 PM #8 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    7:43:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286431 (508:05.56, 4465MB)

    7:43:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    7:43:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 2161
    Recorder: HP DVD Writer 420n, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    Disc Application Code: 64, Disc Physical Code: 193

    7:43:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:43:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286432 (2286432) = #2286432/508:5.57
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286432 blocks [HP DVD Writer 420n ]
    --------------------------------------------------------------

    7:43:00 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HP DVD Writer 420n ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682612736, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286432 | lead-out | 1 | 0x00 | 0x41

    7:43:00 PM #15 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    7:43:00 PM #16 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    7:43:00 PM #17 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    7:43:00 PM #18 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 2.4x (3,324 KB/s)

    7:43:00 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:43:00 PM #20 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 23:33,981 (1413981ms) -> OK

    7:43:00 PM #21 Text 0 File DVDR.cpp, Line 2222
    Recording mode: Sequential Recording Mode for Multisession

    7:43:00 PM #22 Text 0 File Mmc.cpp, Line 20945
    Set BUFE: supported -> ON

    7:43:00 PM #23 Text 0 File DVDR.cpp, Line 2363
    Start write address at LBA 0
    DVD high compatibility mode: No

    7:43:00 PM #24 Text 0 File Cdrdrv.cpp, Line 8219
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:43:00 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1190
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x11
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE3 0x60 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x11

    7:43:00 PM #26 Text 0 File DVDR.cpp, Line 5635
    Drive: HP DVD Writer 420n
    Book Type request: DVD-ROM
    Drive doesn't support changing Book Type for DVD-R

    7:43:00 PM #27 CDR -1207 File DVDR.cpp, Line 4846
    Book Type automatically set to: DVD-ROM

    7:43:00 PM #28 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
    Illegal disc

    7:43:00 PM #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
    Could not perform start of Disc-at-once

    7:43:00 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    7:43:00 PM #31 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 2:03:36 PM
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 8:53:04 AM
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 7, 3, size=98176 bytes, created 11/26/2004 1:36:24 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 7, 3, size=28928 bytes, created 11/26/2004 1:36:06 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 7, 3, size=7808 bytes, created 11/26/2004 1:36:26 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. FFsp42

    FFsp42 Regular member

    Joined:
    Feb 5, 2006
    Messages:
    152
    Likes Received:
    0
    Trophy Points:
    26
    Some friendly advice, I'd edit out that serial number for your Nero before it ends up being shared on the internet.
     
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi ARose13
    Yeah edit out those serial # - at the top of the log and begin w/ 1A.

    Recorder: <HP DVD Writer 420n> Version: 1.25
    The firmware can use an update - the latest is 1.33.
    Here's a link.
    Illegal disc is usually caused by the media/and or firmware not supporting the discs you are using. So this update may help resolve that.

    Nero version: 6.3.1.29
    Nero can use an update too - update to 6.6.0.18 - the last version of 6 to autoburn w/ Shrink.
    package 1
    package 2

    File 'Drivers\InCDfs.SYS'
    Nero's InCD can sometimes cause conflicts - if you're not using it uninstall it and run the clean tool.

    Give that a go and let us know.

    edit: spelling
     
    Last edited: Jan 31, 2007

Share This Page