im having problem with my dvd shrink. i decrypt than i shrink enabling burning with nero it goes through all the process and when it prompts to insert empty disc i do and than i get illegal disc , cannot start disc at once
Hello. Post the section of your Nero History log that deals with this burn. The History log is in one of these paths depending on the Nero version used: Nero 6: Program Files > Ahead > Nero > NeroHistory Nero 7: Program Files > Nero > Nero7 > Core > NeroHistory The log file is divided into sections, one for each of the last several attempted burns. Each section begins with a Burning ROM header followed by your name and Nero serial number. Be sure to omit the name and serial number from your posting.
hi here is the history log[]====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.20 (Nero Express) Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 2 TA 0 - 6.3.1.20 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 2 TA 0 - 6.3.1.20 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : SAMSUNG MP0402H atapi Port 0 ID 0 DMA: On CdRomPeripheral : COMPAQ CD-ROM SN-124 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === COMPAQ CD-ROM SN-124 D: CDRom0 _NEC DVD_RW ND-2500A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 32505856 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 190MB (195568kB) Free physical memory: 76MB (78360kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.3.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 6:11:31 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 6:11:31 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 6:11:31 PM #3 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2286160 (gap 0) Blank 0 Res -1 Dmg 0 Mode TRM_DATA_MODE1 (0) 6:11:31 PM #4 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 1 allowed to copy 1: 0 - 2286160 = 2286160, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:11:31 PM #5 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 6:11:31 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2286159 (508:02.09, 4465MB) 6:11:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 6:11:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 6:11:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:11:31 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [ Image Recorder ] -------------------------------------------------------------- 6:11:31 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682362880, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286160 | lead-out | 1 | 0x00 | 0x41 6:11:31 PM #12 Phase 120 File dlgbrnst.cpp, Line 1855 Creating the image for burning 6:11:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:44:26 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 2286160 (22E250h), lenght 0 blocks 6:44:26 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:44:28 PM #16 Phase 121 File dlgbrnst.cpp, Line 1855 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 6:45:42 PM #1 Text 0 File Reader.cpp, Line 126 Reader running 6:45:51 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 387395584 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:02.10 ( 2286160) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\tina.WEBSTERS\My Documents\TempImage.nrg> 6:45:52 PM #3 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 6:45:57 PM #4 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286159 (508:02.09, 4465MB) 6:45:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 6:45:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R Disc Manufacturer: DAXON0 - 16S Disc Application Code: 64, Disc Physical Code: 193 6:45:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:45:58 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [_NEC DVD_RW ND-2500A ] -------------------------------------------------------------- 6:45:58 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286160 | lead-out | 1 | 0x00 | 0x41 6:45:58 PM #10 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 2.4x (3,324 KB/s) 6:45:59 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:45:59 PM #12 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 23:33,818 (1413818ms) -> OK 6:45:59 PM #13 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode 6:45:59 PM #14 Text 0 File Mmc.cpp, Line 20531 Set BUFE: supported -> ON 6:45:59 PM #15 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 6:45:59 PM #16 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:45:59 PM #17 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x50 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 6:45:59 PM #18 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 6:45:59 PM #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 6:45:59 PM #20 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 6:46:00 PM #21 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.134 , size=24698 bytes, created 12/9/2003 6:24:58 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Try to update your Nero from here, BOTH packages Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe It is recommended to have a minimum of 512 mb RAM to successfully burn DVDs, you will struggle with this amount (even for CDs) These are poor quality, try Verbatim or Sony (made in japan) Can you explain EXACTLY what you are trying to do.
hi gwendolin, firstly i decrypt than go into shrink and proceed with the shrinking process it goes through all tha tstuff. then prompts me to insert black disc to burn with using nero, than comes up illegal disc , cannot start dis at once. also dos this when try to copy an already burnt disc. i am using benq dvd-r discs thanks
The CDRAL driver can cause problem with some systems. If you don't use any Roxio software like Easy Media Creator, etc., run the Roxio Zapper to get rid of it: http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml http://kb.roxio.com/content/kb/EE6000061 Try copying your disk to your hard drive first and then burn it from there instead of using the copy on the fly option (which is problematic to begin with and doubly so with limited memory). This is really an odd thing in the log: If this is a DVD, rip it to your HD with DVD Decrypter in ISO Read mode and then use DVD Decrypter in ISO Write mode to burn the ISO image created to a disk. While you could use Nero to burn the image as well, this will test whether your burner is working correctly or whether something in Nero is the culprit.
hi, thanks i will try all that and see how i go. i never has this problem, burnt 100's movies prior to this irritating problem
hi gwendolin sorry bit late been working heaps. i'm a nurse always on call Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM Nero version: 6.3.1.20 (Nero Express) Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 2 TA 0 - 6.3.1.20 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 2 TA 0 - 6.3.1.20 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : SAMSUNG MP0402H atapi Port 0 ID 0 DMA: On CdRomPeripheral : COMPAQ CD-ROM SN-124 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === COMPAQ CD-ROM SN-124 D: CDRom0 _NEC DVD_RW ND-2500A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 32505856 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 190MB (195568kB) Free physical memory: 45MB (46800kB) Memory in use : 76 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.3.2007 ISO compilation 9:28:36 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:28:36 PM #2 Text 0 File Reader.cpp, Line 126 Reader running 9:28:36 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 9:28:36 PM #4 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 9:28:37 PM #5 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285759 (507:56.59, 4464MB) 9:28:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 9:28:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 9:28:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:28:37 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [_NEC DVD_RW ND-2500A ] -------------------------------------------------------------- 9:28:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681236480, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2285760 | lead-out | 1 | 0x00 | 0x41 9:28:56 PM #11 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 9:28:57 PM #12 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 9:28:57 PM #13 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 9:28:57 PM #14 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 2.4x (3,324 KB/s) 9:28:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:28:57 PM #16 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 23:33,577 (1413577ms) -> OK 9:28:57 PM #17 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode for Multisession 9:28:57 PM #18 Text 0 File Mmc.cpp, Line 20531 Set BUFE: supported -> ON 9:28:57 PM #19 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 9:28:57 PM #20 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:28:57 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE0 0xC0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 9:28:57 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614 Illegal disc 9:28:57 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 9:28:57 PM #24 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 9:28:57 PM #25 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.134 , size=24698 bytes, created 12/9/2003 6:24:58 PM File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 2:53:14 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 2:53:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 2:57:12 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The only thing I can see that's changed is you are using a different disc...you still need to do as in my first post