I have been getting the dreaded "power calibration error" every time I go to burn a dvd. It is still working fine for cd - have tried everything - different media, cleaning the writer, disabling the IMAPI thingee, updating to the latest version of Nero 6, everything I can think of, and followed the advice in other forum threads regarding this problem. I'm fed up! Any alternative burners you can recommend - I only need something for dvd files. Thanks!!
I am also at the point to where I am looking or alternatives. Just looking to condense and burn DVD files I have ripped into my computer (via dvd decryptor). - can anyone recommend a good program??
Shrink compresses the file to fit 4.7 DVD. ImgBurn will burn the ISO file that Shrink can create. Your burner may on the way out. How old is it? Can you try it in another pc? If you're doing newer movies you'll need something to get past DRMs, because Shrink, or for that matter, Nero can't handle.
My burner is only a year or so old - I am able to burn discs very occasionally, but mostly get the "power calibration error". Thought ImgBurn might be the way to go, so I tried creating image in nero, then burning with ImgBurn, but I get a power calibration problem with this too... Does this sound like I need a new burner?? Any other tips I can try?? My computer has been running a bit unstable lately, would a clean windows install be a possibility for a fix, or do you think this will make no difference?
Hey Gwendolin, thanks for having a look! Here goes... Nero log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 p.m. NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <DVDRW IDE 16X >Version: A091 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVDRW IDE 16X D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 85MB (87284kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.3.2007 UDF/ISO compilation 9:05:55 p.m. #1 Phase 112 File dlgbrnst.cpp, Line 1685 DVD-Video files reallocation started 9:05:55 p.m. #2 Phase 114 File dlgbrnst.cpp, Line 1685 DVD-Video files reallocation completed (no file modified) 9:05:55 p.m. #3 Text 0 File Isodoc.cpp, Line 6475 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 9:05:55 p.m. #4 Phase 111 File dlgbrnst.cpp, Line 1685 DVD-Video files sorted 9:05:55 p.m. #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 70656KB of Memory 9:05:55 p.m. #6 Text 0 File Reader.cpp, Line 124 Reader running 9:05:55 p.m. #7 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 9:05:55 p.m. #8 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:05:56 p.m. #9 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:05:56 p.m. #10 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 9:05:56 p.m. #11 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2202159 (489:22.09, 4301MB) 9:05:56 p.m. #12 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 9:05:56 p.m. #13 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 9:05:56 p.m. #14 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:05:56 p.m. #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2202160 (2202160) = #2202160/489:22.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202160 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 9:05:56 p.m. #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510023680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202160 | lead-out | 1 | 0x41 | 0x00 9:05:56 p.m. #17 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:05:56 p.m. #18 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:05:56 p.m. #19 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 9:05:56 p.m. #20 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 9:05:56 p.m. #21 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 9:05:56 p.m. #22 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5,540 KB/s) 9:05:56 p.m. #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:05:56 p.m. #24 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 9:05:56 p.m. #25 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 9:05:56 p.m. #26 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:06:02 p.m. #27 SPTI -1015 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1015) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 02 Buffer x0b760000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9:06:02 p.m. #28 CDR -1015 File Writer.cpp, Line 311 Calibration area full D: DVDRW IDE 16X 9:06:02 p.m. #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:06:03 p.m. #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:06:03 p.m. #31 Text 0 File DVDR.cpp, Line 3103 EndDAO: Last written address was -1 9:06:03 p.m. #32 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 19/05/2004 9:11:06 p.m. (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) And the ImgBurn logs if that's any help I 19:29:20 Source File Sectors: 1,769,232 (MODE1/2048) I 19:29:20 Source File Size: 3,623,387,136 bytes I 19:29:20 Source File Volume Identifier: NEW I 19:29:20 Source File Application Identifier: NERO BURNING ROM I 19:29:20 Source File Implementation Identifier: Nero I 19:29:20 Source File File System(s): ISO9660, UDF (1.02) I 19:29:20 Destination Device: [1:0:0] DVDRW IDE 16X A091 (D (ATA) I 19:29:20 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 4x, 8x, 12x, 16x) I 19:29:20 Destination Media Sectors: 2,298,496 I 19:29:20 Write Mode: DVD I 19:29:20 Write Type: DAO I 19:29:20 Write Speed: 4x I 19:29:20 Link Size: Auto I 19:29:20 Test Mode: No I 19:29:20 BURN-Proof: Enabled I 19:29:20 Filling Buffer... (20 MB) I 19:29:21 Writing LeadIn... W 19:29:35 Failed to Write Sectors 0 - 31 - Power Calibration Area Error W 19:29:35 Retrying (1 of 20)... W 19:29:47 Retry Failed - Power Calibration Area Error W 19:29:47 Retrying (2 of 20)... W 19:29:57 Retry Failed - Power Calibration Area Error W 19:29:57 Retrying (3 of 20)... W 19:30:12 Retry Failed - Power Calibration Area Is Full W 19:30:12 Retrying (4 of 20)... W 19:30:13 Retry Failed - Power Calibration Area Is Full W 19:30:13 Retrying (5 of 20)... W 19:30:14 Retry Failed - Power Calibration Area Is Full W 19:30:14 Retrying (6 of 20)... W 19:30:15 Retry Failed - Power Calibration Area Is Full W 19:30:15 Retrying (7 of 20)... W 19:30:16 Retry Failed - Power Calibration Area Is Full W 19:30:16 Retrying (8 of 20)... W 19:30:16 Retry Failed - Power Calibration Area Is Full W 19:30:16 Retrying (9 of 20)... W 19:30:17 Retry Failed - Power Calibration Area Is Full W 19:30:17 Retrying (10 of 20)... W 19:30:17 Retry Failed - Power Calibration Area Is Full W 19:30:17 Retrying (11 of 20)... W 19:30:18 Retry Failed - Power Calibration Area Is Full W 19:30:18 Retrying (12 of 20)... W 19:30:18 Retry Failed - Power Calibration Area Is Full W 19:30:18 Retrying (13 of 20)... W 19:30:19 Retry Failed - Power Calibration Area Is Full W 19:30:19 Retrying (14 of 20)... W 19:30:20 Retry Failed - Power Calibration Area Is Full W 19:30:20 Retrying (15 of 20)... W 19:30:20 Retry Failed - Power Calibration Area Is Full W 19:30:20 Retrying (16 of 20)... W 19:30:21 Retry Failed - Power Calibration Area Is Full W 19:30:21 Retrying (17 of 20)... W 19:30:22 Retry Failed - Power Calibration Area Is Full W 19:30:22 Retrying (18 of 20)... W 19:30:22 Retry Failed - Power Calibration Area Is Full W 19:30:22 Retrying (19 of 20)... W 19:30:23 Retry Failed - Power Calibration Area Is Full W 19:30:23 Retrying (20 of 20)... W 19:30:23 Retry Failed - Power Calibration Area Is Full E 19:30:29 Failed to Write Sectors 0 - 31 - Power Calibration Area Error I 19:30:29 Synchronising Cache... E 19:30:30 Failed to Write Image! E 19:30:30 Operation Failed! - Duration: 00:01:09 I 19:30:30 Average Write Rate: N/A - Maximum Write Rate: N/A I 19:31:40 Operation Started! I 19:31:40 Source File: C:\Documents and Settings\Amber & Isaac\Desktop\Image.nrg I 19:31:40 Source File Sectors: 1,769,232 (MODE1/2048) I 19:31:40 Source File Size: 3,623,387,136 bytes I 19:31:40 Source File Volume Identifier: NEW I 19:31:40 Source File Application Identifier: NERO BURNING ROM I 19:31:40 Source File Implementation Identifier: Nero I 19:31:40 Source File File System(s): ISO9660, UDF (1.02) I 19:31:40 Destination Device: [1:0:0] DVDRW IDE 16X A091 (D (ATA) I 19:31:40 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 4x, 8x, 12x, 16x) I 19:31:40 Destination Media Sectors: 2,298,496 I 19:31:40 Write Mode: DVD I 19:31:40 Write Type: DAO I 19:31:40 Write Speed: 4x I 19:31:40 Link Size: Auto I 19:31:40 Test Mode: No I 19:31:40 BURN-Proof: Enabled I 19:31:41 Filling Buffer... (20 MB) I 19:31:41 Writing LeadIn... W 19:31:54 Failed to Write Sectors 0 - 31 - Power Calibration Area Error W 19:31:54 Retrying (1 of 20)... W 19:32:04 Retry Failed - Power Calibration Area Error W 19:32:04 Retrying (2 of 20)... W 19:32:15 Retry Failed - Power Calibration Area Error W 19:32:15 Retrying (3 of 20)... W 19:32:29 Retry Failed - Power Calibration Area Error W 19:32:29 Retrying (4 of 20)... W 19:32:43 Retry Failed - Power Calibration Area Error W 19:32:43 Retrying (5 of 20)... W 19:32:56 Retry Failed - Power Calibration Area Error W 19:32:56 Retrying (6 of 20)... W 19:33:07 Retry Failed - Power Calibration Area Error W 19:33:07 Retrying (7 of 20)... W 19:33:19 Retry Failed - Power Calibration Area Error W 19:33:19 Retrying (8 of 20)... W 19:33:35 Retry Failed - Power Calibration Area Error W 19:33:35 Retrying (9 of 20)... W 19:33:45 Retry Failed - Power Calibration Area Error W 19:33:45 Retrying (10 of 20)... W 19:34:02 Retry Failed - Power Calibration Area Error W 19:34:02 Retrying (11 of 20)... W 19:34:16 Retry Failed - Power Calibration Area Error W 19:34:16 Retrying (12 of 20)... W 19:34:31 Retry Failed - Power Calibration Area Error W 19:34:31 Retrying (13 of 20)... W 19:34:48 Retry Failed - Power Calibration Area Error W 19:34:48 Retrying (14 of 20)... I 19:34:52 Abort Request Acknowledged W 19:35:09 Retry Failed - Power Calibration Area Error W 19:35:09 Retrying (15 of 20)... W 19:35:23 Retry Failed - Power Calibration Area Error W 19:35:23 Retrying (16 of 20)... W 19:35:38 Retry Failed - Power Calibration Area Error W 19:35:38 Retrying (17 of 20)... W 19:35:52 Retry Failed - Power Calibration Area Error W 19:35:52 Retrying (18 of 20)... W 19:36:03 Retry Failed - Power Calibration Area Error W 19:36:03 Retrying (19 of 20)... W 19:36:16 Retry Failed - Power Calibration Area Error W 19:36:16 Retrying (20 of 20)... W 19:36:32 Retry Failed - Power Calibration Area Error E 19:36:34 Failed to Write Sectors 0 - 31 - Power Calibration Area Error I 19:36:34 Synchronising Cache... E 19:36:35 Failed to Write Image! E 19:36:35 Operation Aborted! - Duration: 00:04:54 I 19:36:35 Average Write Rate: N/A - Maximum Write Rate: N/A I 19:36:35 Close Request Acknowledged I 19:36:35 Closing Down... I 19:36:38 Shutting down SPTI... I 19:36:38 ImgBurn closed!
Nero 6.6.1.4 This version of Nero contains some bugs, uninstall, run this clean tool http://ww2.nero.com/nero6/en/Clean_Tools.html and then install this more stable version, BOTH packages Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe Far too much memory in use, dont multitask while burning. These arent the best quality discs, try Verbatim or Sony (made in japan)
Ok - followed directions and installed other version of Nero - still no go. Memory usage is still really high - but that's just running Nero, I can't figure out how to cut it down any further. Haven't got access to other media at the moment, but in the past I have never had any probs with these TDK ones. It just seems to have happened all of a sudden - I have a BTC DVDRW IDE 16X cheapie writer - it still burns cd discs fine, just not dvd. I haven't experienced any problems untill the past few days. Here is the new log since cleaning system and reinstalling: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 p.m. Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVDRW IDE 16X >Version: A091 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVDRW IDE 16X D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 91MB (93360kB) Memory in use : 81 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.3.2007 UDF/ISO compilation 10:27:19 p.m. #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 10:27:19 p.m. #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 10:27:19 p.m. #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 10:27:19 p.m. #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 10:27:20 p.m. #5 Text 0 File Reader.cpp, Line 127 Reader running 10:27:20 p.m. #6 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 10:27:20 p.m. #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:27:20 p.m. #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:27:20 p.m. #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:27:20 p.m. #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1769231 (393:09.56, 3455MB) 10:27:20 p.m. #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:27:20 p.m. #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 10:27:20 p.m. #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:27:20 p.m. #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1769232 (1769232) = #1769232/393:9.57 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1769232 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 10:27:20 p.m. #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3623387136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1769232 | lead-out | 1 | 0x41 | 0x00 10:27:21 p.m. #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:27:21 p.m. #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 10:27:21 p.m. #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:27:21 p.m. #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 10:27:21 p.m. #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:27:21 p.m. #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 10:27:21 p.m. #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Super Link -> ON 10:27:21 p.m. #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 10:27:21 p.m. #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:27:34 p.m. #25 SCSI -1015 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06810000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x02 10:27:34 p.m. #26 CDR -1015 File Writer.cpp, Line 311 Calibration area full 10:27:34 p.m. #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:27:34 p.m. #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:27:34 p.m. #29 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 10:27:34 p.m. #30 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 19/05/2004 9:11:06 p.m. (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 p.m. (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I am not sure but I think this may be your burner here, if so then do firmware update. http://forum.rpc1.org/dl_firmware.php?download_id=1913 I cannot explain this error, I will do a "google"
Your memory usage is being used up by something other than Nero. How many programs are running in the bottom right of your taskbar (beside the clock?)
In the bottom right I have icons for ZoneAlarm, AVG antivirus, Norton A/V, & that's all. Usually the OpenOffice Quickstart is there, but I closed that before I tried the last burn. When I check the processes in the Task Manager, it says I have about 18,000K of memory available (that's without Nero running) but still, seems like it should be enough... then somehow when I burn it all disappears