1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Imgburn won't burn any lower than 6x?

Discussion in 'DVD / Blu-ray drives' started by DarkEly, Nov 17, 2011.

  1. DarkEly

    DarkEly Member

    Joined:
    Sep 10, 2010
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    imgburn version: 2.5.6.0
    dvd burner: Sony dvd rw dw-d26a

    I am trying to burn a iso at 2x but imgburn says my drive is not supported. Why? and can I force imgburn to burn at a lower rate. Thanks in advance.
     
  2. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    The Disk ID and the burner firmware decide the speed.
    You can select a slower burning speed in ImgBurn, but if the firmware is set to burn that particular disk at a higher rate, ImgBurn has no effect.


    You can click Tools > Drive > Check for firmware updates, but I would only change firmware as a last resort.

    [​IMG]
     
  3. DarkEly

    DarkEly Member

    Joined:
    Sep 10, 2010
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    thank you
     

Share This Page