1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Interal Target Failure & Could not perform end of Disc-at-once

Discussion in 'Nero discussion' started by brownc2, Jan 7, 2007.

  1. brownc2

    brownc2 Member

    Joined:
    Jan 7, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hi!
    Never had this problem until recently. Log is pasted below. Any suggestions?

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <ASUS DRW-0402P/D> Version: 1.05 - HA 0 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 0
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TSSTcorp CDRWDVD TS-H492C>Version: DE02 - HA 0 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : ASUS DRW-0402P/D atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CDRWDVD TS-H492C atapi Port 0 ID 1 DMA: Off
    DiskPeripheral : HDS728080PLA380 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    ASUS DRW-0402P/D D: CDRom0
    TSSTcorp CDRWDVD TS-H492C E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 502MB (514124kB)
    Free physical memory: 75MB (76888kB)
    Memory in use : 85 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.1.2007
    UDF/ISO compilation
    8:16:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    8:16:51 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    8:16:51 PM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    8:16:51 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    8:16:51 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    8:16:51 PM #6 Text 0 File Writer.cpp, Line 122
    Writer ASUS DRW-0402P/D running

    8:16:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:16:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:16:51 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    8:17:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1439759 (319:56.59, 2812MB)

    8:17:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    8:17:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: ASUS DRW-0402P/D, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    8:17:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    8:17:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1439760 (1439760) = #1439760/319:56.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1439760 blocks [ASUS DRW-0402P/D]
    --------------------------------------------------------------

    8:17:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [ASUS DRW-0402P/D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2948628480, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1439760 | lead-out | 1 | 0x41 | 0x00

    8:17:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    8:17:11 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    8:17:11 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    8:17:11 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    8:17:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:17:11 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    8:17:11 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:17:19 PM #23 Text 0 File Cdrdrv.cpp, Line 1288
    20:17:19.234 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:07 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:07.437 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:07 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:07.593 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:07 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:07.640 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.062 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.125 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.171 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.437 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.484 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.765 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:09 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:09.843 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:10 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:10.359 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:10 PM #35 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:10.515 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:10 PM #36 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:10.578 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:51 PM #37 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:51.781 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:51 PM #38 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:51.937 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:51 PM #39 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:51.984 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:53 PM #40 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:53.812 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:23:53 PM #41 Text 0 File Cdrdrv.cpp, Line 1288
    20:23:53.859 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:24:45 PM #42 Text 0 File Cdrdrv.cpp, Line 1288
    20:24:45.296 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:24:45 PM #43 Text 0 File Cdrdrv.cpp, Line 1288
    20:24:45.421 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:24:45 PM #44 Text 0 File Cdrdrv.cpp, Line 1288
    20:24:45.468 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:25:45 PM #45 Text 0 File Cdrdrv.cpp, Line 1288
    20:25:45.890 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:25:46 PM #46 Text 0 File Cdrdrv.cpp, Line 1288
    20:25:46.000 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:25:46 PM #47 Text 0 File Cdrdrv.cpp, Line 1288
    20:25:46.062 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    8:26:40 PM #48 Text 0 File WriterStatus.cpp, Line 116
    <ASUS DRW-0402P/D > start writing Lead-Out at LBA 1439760 (15F810h), lenght 0 blocks

    8:26:40 PM #49 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:26:49 PM #50 SCSI -1061 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x44
    Sense Qual: 0xD6
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x44 0xD6

    8:26:49 PM #51 CDR -1061 File ThreadedTransferInterface.cpp, Line 1916
    Internal target failure

    8:26:49 PM #52 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
    Could not perform end of Disc-at-once

    8:26:49 PM #53 SCSI -1122 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x57
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x57 0x00

    8:26:49 PM #54 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    8:26:51 PM #55 CDR -1122 File WriterStatus.cpp, Line 167
    Unable to recover TOC

    8:26:51 PM #56 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    8:26:51 PM #57 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
    File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 10:34:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi brownc2
    Here's a few suggestions:

    Recorder: <ASUS DRW-0402P/D> Version: 1.05
    Older drive but there is more recent firmware version for it from 2004 -
    1.07.

    CdRomPeripheral : TSSTcorp CDRWDVD TS-H492C atapi Port 0 ID 1 DMA: Off
    Turn DMA back on for this drive. Here's a guide.

    Physical memory : 502MB
    Free physical memory: 75MB
    Memory in use : 85 %

    Alot of memory in use. No multi tasking and close unneeded programs.
    Do a disc cleanup, defrag and run a anti virus & spyware scan too if you haven't very recently.

    File 'Drivers\InCDfs.SYS
    Nero's InCD can sometimes cause problems. If you're not using it uninstall it and run the Clean Tool.

    Give those a go and let us know.
     
  3. brownc2

    brownc2 Member

    Joined:
    Jan 7, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Tried to update firmware on ASUS DRW-0402P/D to version 1.07: It fails - says failed to load binary file ?????

    Followed the guide for the DMA - removed and it redetected.

    Currently running defrag and disk clean-up

    Any suggestions on why it won't update to 1.07?
     
  4. brownc2

    brownc2 Member

    Joined:
    Jan 7, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Tried to update firmware on ASUS DRW-0402P/D to version 1.07: It fails - says failed to load binary file ?????

    Followed the guide for the DMA - removed and it redetected.

    Defrag and disk clean-up are complete

    Could it be a media issue? I usually use Maxell but purchased Memorex this time. I have used both in the past and they both worked. I noticed in the log that it says that my media is "unknown".

    My burner burns CD's fine, just not DVD's.

    Any other suggestions? See latest log.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <ASUS DRW-0402P/D> Version: 1.05 - HA 0 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 0
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <ASUS DRW-0402P/D >Version: 1.05 - HA 0 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : ASUS DRW-0402P/D atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CDRWDVD TS-H492C atapi Port 0 ID 1 DMA: Off
    DiskPeripheral : HDS728080PLA380 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    ASUS DRW-0402P/D D: CDRom0
    TSSTcorp CDRWDVD TS-H492C E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 502MB (514124kB)
    Free physical memory: 88MB (90128kB)
    Memory in use : 82 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.1.2007
    UDF/ISO compilation
    6:56:21 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    6:56:21 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    6:56:21 AM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:56:21 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    6:56:21 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    6:56:21 AM #6 Text 0 File Writer.cpp, Line 122
    Writer ASUS DRW-0402P/D running

    6:56:21 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    6:56:21 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    6:56:21 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    6:56:43 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1439759 (319:56.59, 2812MB)

    6:56:43 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    6:56:43 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: ASUS DRW-0402P/D, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    6:56:43 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    6:56:43 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1439760 (1439760) = #1439760/319:56.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1439760 blocks [ASUS DRW-0402P/D]
    --------------------------------------------------------------

    6:56:43 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [ASUS DRW-0402P/D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2948628480, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1439760 | lead-out | 1 | 0x41 | 0x00

    6:56:43 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    6:56:43 AM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    6:56:43 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    6:56:43 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    6:56:43 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:56:43 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    6:56:43 AM #22 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:56:46 AM #23 Text 0 File Cdrdrv.cpp, Line 1288
    06:56:46.078 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    6:57:00 AM #24 Text 0 File Cdrdrv.cpp, Line 1288
    06:57:00.421 - ASUS DRW-0402P/D\H0 T0 : Queue again later

    7:05:36 AM #25 Text 0 File WriterStatus.cpp, Line 116
    <ASUS DRW-0402P/D > start writing Lead-Out at LBA 1439760 (15F810h), lenght 0 blocks

    7:05:36 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:05:44 AM #27 SCSI -1061 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x44
    Sense Qual: 0xD6
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x44 0xD6

    7:05:44 AM #28 CDR -1061 File ThreadedTransferInterface.cpp, Line 1916
    Internal target failure

    7:05:44 AM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
    Could not perform end of Disc-at-once

    7:05:44 AM #30 SCSI -1122 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x57
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x57 0x00

    7:05:44 AM #31 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    7:05:46 AM #32 CDR -1061 File WriterStatus.cpp, Line 167
    Internal target failure

    7:05:46 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    7:05:47 AM #34 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 10:34:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Could be a media issue - from the log the disc are fully recognized:
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......

    Can always try another brand like Verbatim - look for 8x for this drive.

    But you're still getting an internal target failure & might also be why be you're getting the error updating the firmware.

    2 causes for that can be the drive itself and/or the ide cable.
    And the one drive is still in PIO even after reinstalling it.

    So do you have another pc you can try this drive in? Best way to test these.
    It's an older drive so your best bet may be a new one w/ a new cable.
    Both are pretty cheap now.

    But you also still have alot of memory in use 88% this time.
    So may be playing into it too.
    Look in the system tray (bottom right hand corner) and close all unneeded programs there too.

    Did you do a virus and spyware scan?
     
  6. brownc2

    brownc2 Member

    Joined:
    Jan 7, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Bought some new media (DVD-R HP brand) and things are working again.

    Yes - I also did a virus scan and a spyware scan.

    Thanks for you help. This forum is great and I will use again!
     
  7. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    You're welcome brownc2 :)

    I'm glad it turned out to be the simplest thing!

    Stick around - lots to learn and can always use another helping hand
     

Share This Page