1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is there something i should know about Blade?

Discussion in 'DVD Shrink forum' started by nyjets323, Aug 20, 2004.

  1. nyjets323

    nyjets323 Guest

    Anytime i use dvdshrink with Blade: Platinum Edition it always stops at 68% with a error. When it gets to 67% it slows down and at 68% i hear grinding sounds and than a error.
     
  2. michigan

    michigan Guest

    It's a good movie. ;)

    Sounds like you have a bad disc. It probably has a flaw or scratch on the disc.

     
  3. nyjets323

    nyjets323 Guest

    i cleaned it afew times and it stops at the same spot, im kinda leaning towards some type of anti copy scheme on the disk.
     
  4. colw

    colw Active member

    Joined:
    Apr 25, 2004
    Messages:
    1,735
    Likes Received:
    0
    Trophy Points:
    66
    I would suggest Micigan's advice is correct - there are no new anti copy schemes and Blade is quite copyable.
     
  5. michigan

    michigan Guest

    I backed up the same movie with no problems. I have in th epast had discs that would give a CRC error and if you look close at the disc you can see what almost loks like a watermark on the disc. CRC errors are almost always a damaged or defective disc. If it is new return it to the store, if thats not possible rent it and copy it (you have an original)
     

Share This Page