1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Keylauncher exploit problem

Discussion in 'PS2 - Software boot discussion' started by cody1414, Aug 22, 2004.

  1. cody1414

    cody1414 Member

    Joined:
    Aug 14, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    I went on to www.ps2ownz.com and got the new keylauncher prog and tried to boot it using these progs: Cogswaploader, free HDloader, ps2link, naplink, cdloader and ps2menu. I haven't been able to boot any dev progs on my v7 ps2 yet. I have used the following structure in ps2gen to get the .bin and .cue files:
    /SYSTEM.CNF
    /EXPINST.ELF
    /CDVD.IRX
    /JUNK.IRX
    /TITLE.DB
    /FILES/KL.DAT
    /FILES/BOOT.ELF (KL)
    /FILES/BOOT2.ELF (CogSwapLoader)
    /FILES/CDLOADER.ELF
    /FILES/HDLOADER.ELF
    /FILES/PS2LINK.ELF
    /FILES/PS2MENU.ELF
    /FILES/NAPLINK.ELF
    /FILES/IPCONFIG.DAT (Config. for PS2Link)
    /FILES/IOMANX.IRX
    /FILES/PS2DEV9.IRX
    /FILES/PS2IP.IRX
    /FILES/PS2LINK.IRX
    /FILES/PS2SMAP.IRX
    /FILES/UNRAR.IRX
    /FILES/SYSTEM.CNF
    /DUMMY/DUMMY.BIN (about 130mb with mpeg files)

    I burned the .bin and .cue files on a Memorex CD-RW. I am still a newb at this and I need someone to explain the LBA to me. When I try to boot anything it goes to the red sceen with the swap magic 3.2 background for a while then it gets a blue border around it and thats as far as i got to booting these files.
     
  2. TatMil

    TatMil Guest

    try to use cd-rnot rw and you have to edit title.db( add your psx game)
     
  3. TatMil

    TatMil Guest

    if you stil have problem to load, go to emule and download "PS2_APLICACIONES_HDLOADER_HDADVANCE_[www.bcgp.net]" and you will be able to boot anything
    G-day
     
  4. TatMil

    TatMil Guest

    Boot sm3, swap insert "PS2_APLICACIONES_HDLOADER_HDADVANCE_[www.bcgp.net] boot disk" swap then insert your disk and after you close press "X"
     
  5. cody1414

    cody1414 Member

    Joined:
    Aug 14, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    What is emule?
     
  6. matty8887

    matty8887 Regular member

    Joined:
    Apr 10, 2004
    Messages:
    774
    Likes Received:
    0
    Trophy Points:
    26
    It is a p2p sharing software. like kazaa, you can download many things from all people over the world who use it.
     
  7. TatMil

    TatMil Guest

  8. cody1414

    cody1414 Member

    Joined:
    Aug 14, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    I tried to download the keylauncher0.2+image.rar file of the siirlabs website and tried burning that, but before I did I had to extrac the .bin file to change the TITLE.DB file. But when I put all of the files into cdgenps2 (with the modified title.db) but all of the LBA was changed. I tried burning the image with the scambled LBA but it didn't work. Can someone tell me how the LBA should be set up for the keylauncher0.2+image.bin file? I was also wondering where exactly to get the PS2_APLICACIONES_HDLOADER_HDADVANCE_[www.bcgp.net] file. I looked all over for it but can't seem to find it.
     
  9. TatMil

    TatMil Guest

    OK
    Here I am again...
    Emule you can find at http://www.emule-project.net/
    there you can find everthing what you need..
    Thet is true..when you download keylauncher0.2+image.rar
    (around 3 M) and Unrar you will het 1 cue and 1 bin file.. then (I am ) use ultraiso to make iso file of bin file and again open that file with ultra iso..
    then I am delete original TITLE.DB file and add my own (press F3 )... Then I am une Nero 6 to burn iso file..(without using cue file) on 4x speed on TDK gold..
    Then I am Boot sm3, swap insert "PS2_APLICACIONES_HDLOADER_HDADVANCE_[www.bcgp.net] boot disk" swap then insert KL disk(disk what I am just made) and after you close press "X"..
    All worked well on my PS2 V9 Pal
    Good tutorial is on http://jeexlabs.com/hdloader/ or http://home.socal.rr.com/hypnotika/hdloader tutorial.htm but files there are for US consoles
    _X_X_X_X_X_[small]PS2 ver 9
    HDloader 1.0
    SM 3.2[/small]
     
    Last edited by a moderator: Aug 25, 2004
  10. TatMil

    TatMil Guest

    There are Rar and Zip
    versions I am checked Rar version of PS2_APLICACIONES_HDLOADER_HDADVANCE_[www.bcgp.net]
    and works excelent
    _X_X_X_X_X_[small]PS2 ver 9
    HDloader 1.0
    SM 3.2[/small]
     
    Last edited by a moderator: Aug 25, 2004
  11. TatMil

    TatMil Guest

    If you have problem to add your psx game to Title.db you can check http://ps2newz.net/ for nice small GUI utility that allows easily add entries into your Title.db ...
    Title.db Maker v0.1. A can also instantly add entries from any system.cnf you point it to.
     
  12. Dark_K

    Dark_K Member

    Joined:
    Aug 28, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    i just released v0.2 of Title.DB Maker, there were several pretty big bugs in v0.1 that i fixed in v0.2. so if you already downloaded v0.1 i highly recommend getting v0.2.
     
    Last edited: Aug 28, 2004
  13. cody1414

    cody1414 Member

    Joined:
    Aug 14, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    OK!!!!I still cant get this to work!! I went and downloaded ultraiso and opened up the keylauncher image package that I downloaded off od siirlabs(the one with the progs already in it ie:HDL, HDA, CDL, CSL etc.)I looked though the files and deleted the original title.db file and copied my own into the .bin file. I then right clicked on the title.db file and went into view which opened notepad with a lot of gibberish, but I noticed at the bottom it said: mc0:\BRDATA-SYSTEM\BOOT.ELF but I have a us ps2 so I changed it to: mc0:BEDATA-SYSTEM\BOOT.ELF, but that cant be the problem because I couldnt even install the files on my mc yet. I also noticed that it said non-bootable in the ultra iso, so I selected system.cnf as the boot file and it changed to bootable. And I changed the kl.dat file it read mc0:\BADATA-SYSTEM\(files) for each buttom installment so I changed each of them to BEDATA-SYSTEM. I burned I on sony cdr. Oh, and i tried booting it as an .iso file.
     
  14. cody1414

    cody1414 Member

    Joined:
    Aug 14, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Also what happens is after i boot up sm3cd and slide card the iso disc in and try to boot it, it starts spinning but before it gets up to full speed it kind of makes a skipping noise then shown a blue border on my v7 us ps2, flashing pink/blue bar on the top screen on my friends v5 us ps2.
     
  15. TatMil

    TatMil Guest

    I do not know...
    I am still new to this, but so far all was so easy and without problems...
    Bigest problem for me was booting SM 3.2 disk on my Pal PS2 ver 9 .. It is work everi 6-7 -th time...
    Meybe is problem in that because you are edit your file in notepad...
    All that is maybe right, but I'm still thinking that you are traying to boot cd without boot disk..
    If you are affreid to use emule.. Read about it in some forums and you will see that is one of safest P2P aps...
     
  16. cody1414

    cody1414 Member

    Joined:
    Aug 14, 2004
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    I went on emule and got the PS2_APLICACIONES_HDLOADER_HDADVANCE[www.bcgp.net].rar file and extracted the bin/cue files then I opened it up in UltraISO then saved it as a .iso file burnt to disk and still wont boot. It seems that when I put in sm3 disk it boots it up then when it stops spinning, the laser stays on the outside of the cd. But when I burn it, the small data (apx.50mb) is in the center so when i click on Load Program in sm3 it starts spinning and freezes before it gets to the data and just keeps spinning it seems. Its done that every time on every cdr I tried to boot up. I also noticed that when the smdvd2 stops spinning the laser stops in the center of the disk.
     
  17. TatMil

    TatMil Guest

    When you are get PS2_APLICACIONES_HDLOADER_HDADVANCE[www.bcgp.net].rar file you do not need to convert it to iso..just burn it...use nero or other ap. (go File and use option burn image file..)...
    After you get you do not edit anything...
    I am get impresion that you are presing eject buton when you are swaping cds... that is wrong...use slide card or flip top.. in no case pres eject, because that send signal to procesor to recheck if inserted cd is original...
    Sorry man I wish I can do this for you, because you are missing good tools..
    Good luck
    p.s. please never edit nothing exept title.db file and for shore not in notepad...
     
  18. malcdogg

    malcdogg Regular member

    Joined:
    Aug 23, 2004
    Messages:
    572
    Likes Received:
    0
    Trophy Points:
    26
    Hey guys what if youre like me and dont know anything about how to do all this? I have hdloader lite on my mem card and it works fine but i also want to be able to boot my backups, not just straight to Hdloader. Thats really all i want. cogswap and hdloader. I fsomeone could give me a simple ass explaintion of how to set up keylauncher with just those 2 ill be eternaly grateful. Thanks for your time.
     
  19. Megadeth

    Megadeth Regular member

    Joined:
    Dec 10, 2003
    Messages:
    147
    Likes Received:
    0
    Trophy Points:
    26
  20. malcdogg

    malcdogg Regular member

    Joined:
    Aug 23, 2004
    Messages:
    572
    Likes Received:
    0
    Trophy Points:
    26
    Thanks.
     

Share This Page