i used xtreme boot maker and got a floppy ready with edited mtk flash. used the latest version and did select the two ms28 options. now my drive shows up when i type mtkflash r /m orig.bin and i select it and turn the 360 off for ten seconds and turn it back on. nothing happens!!! even tried mtkflash r /sata /m orig.bin THE TEN SECOND METHOD WON"T WORK!! Is it possible for someone to edit my mtkflash manually if i give you the values?? that would be nice. MY CARD IS VIA 6421A and i bought it from: http://btecanada.com/catalog/produc...=5024&osCsid=77648ea7e28da4050437d770b4e955b4 and i also went throught the mtkflash stickied tutorial on how to fix no drive detected. was of no help. tried everything. but my drive is detected!!! after ten second method this is what i get in one line: port a000, primary/slave a0 wat do u think it means??? shuld it continue from here and dump?? i tried the back port of the card and nothing came up, then the port 1 and it shows up, no jumpers on card. anyones help will be greatly appreciated!!!