This is the error message i get when burning images through DVD Decrypter I 19:11:02 DVD Decrypter Version 3.5.2.0 started! I 19:11:02 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 19:11:02 Initialising SPTI... I 19:11:02 Searching for SCSI / ATAPI devices... I 19:11:03 Found 1 CD-RW and 1 DVD±RW! I 19:12:01 Operation Started! I 19:12:01 Source File: C:\Dvds\MontyP.iso I 19:12:01 Source File Sectors: 2,285,888 (MODE1/2048) I 19:12:01 Source File Size: 4,681,498,624 bytes I 19:12:01 Destination Device: [1:0:0] PIONEER DVD RW DVR-106D 1.07 (D (ATA) I 19:12:01 Destination Media Type: DVD-R (Disc ID: SKC Co.,Ltd.) (Speeds: 1x, 2x, 4x) I 19:12:02 Destination Media Sectors: 2,298,496 I 19:12:02 Write Mode: DVD I 19:12:02 Write Speed: MAX I 19:12:02 Test Mode: No I 19:12:02 BURN-Proof: Enabled I 19:12:02 Filling Buffer... I 19:12:02 Writing LeadIn... W 19:12:05 Failed to Write Sectors 768 - 799 - Unknown (Internal Target Failure) (0x44, 0xD9) W 19:12:05 Retrying (1 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (2 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (3 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (4 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (5 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (6 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (7 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (8 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (9 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (10 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (11 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (12 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (13 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (14 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (15 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (16 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (17 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (18 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (19 of 20)... W 19:12:05 Retry Failed - Invalid Address For Write W 19:12:05 Retrying (20 of 20)... W 19:12:05 Retry Failed! - Invalid Address For Write E 19:12:08 Failed to Write Sectors 768 - 799 - Invalid Address For Write I 19:12:08 Synchronising Cache... E 19:12:08 Failed to Write Image! E 19:12:08 Operation Failed! - Duration: 00:00:07 I 19:12:08 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 346 KB/s (0.2x)
Either these SKC disc's are crap, or your burner firmware 1.07 doesn't support them. http://www.pioneerelectronics.com/pna/article/0,,2076_4249_2370258,00.html Device data and firmware level detector. http://www.pioneerelectronics.com/pio/pe/images/portal/cit_3424/76945239DeviceInfo.exe Firmware Update to Version 1.08 for disc SetUp process improvement. http://www.pioneerelectronics.com/pio/pe/images/portal/cit_3424/73813268DVRA06_FW108.exe
Hi Veblin, when I run the upgrade of firmware it says "Available target is not found" What am I doing wrong mate? Thanks for your help.
I get pretty much the same message from dvd decrypter when I try to burn anything.. Nothing I do helps.. MY drive is the Pioneer A07, this thing will however read true pressed DVD's and CD's but not any burnt media..I cannot figure it out. I have done everything from reinstall hardware/software etc.. I did upgrade from FW 1.20 to 1.21 and it did accept the update but no change..
Burnt with Pioneer DVR-A06/106 at 2x using firmware 1.07. Burning reliability is Good. PC reliability is Mixed. DVD reliability is Poor. Console reliability is Poor. Media inkjet printable reliability is Good. Media color is White. Media text is SKC DVD-R. Authoring/Burning comments: NERO Works fine on Elta 8883 Does not work on Panasonic RP56 http://www.videohelp.com/dvdmedia change your media,check out the link above for more bad reports with kind regards hursty
I had the same problem with XCopy Xpress awile back. The problem was that the file path to the HD was not correct so it did not know where to write it to. I had to redefine the pathway to the HD. mle
Im still at a loss... I am about to go nuts... I have put the 107 in a different machine and same result... So I guess the damn drive is toast... after 7mths pretty ridiculous.... Gonna have to send it to Pioneer I guess...
Finally sorted the problem. IT'S THE MEDIA!!!!!!!! Changed from my normal to "GRADE A" media, And only one or two problems out of 50 -100 now. Change to the best media even if it is more money, I went for the G04 dyed ones are great results. No more coasters. WOOHOO!
scroll through this thread post your results exactly what i have been saying!!!! http://www.afterdawn.com/news/archive/6087.cfm glad to here you are on the move!!! kind regards hursty
The source target size of 4,681,498,624 may be too large. Try compressing the file a bit with DVD Shrink and try again.
so what is my excuse then? G05's that worked flawless (over 100 successful) wont even work now.. Maxell DVD-R or Maxell DVD+R's that i have used many times are not working either. Glad you sorted your issue out thou.. thought there was hope for me
