1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My XBIT wont work! please help!

Discussion in 'Xbox - Hardware mods' started by neosuave, Sep 15, 2004.

  1. neosuave

    neosuave Member

    Joined:
    Jan 16, 2004
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    11
    I flashed the evo 7 in the correct bank according to the switches and I verified to check if the flash worked and it did. I installed the chip correctly and wont work. Please help dont know what to.
     
  2. neosuave

    neosuave Member

    Joined:
    Jan 16, 2004
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    11
    Help, please I need to know what to do.
     
  3. Hrdrk20

    Hrdrk20 Regular member

    Joined:
    Feb 13, 2004
    Messages:
    482
    Likes Received:
    0
    Trophy Points:
    26
    You need to be more specific than " it won't work" for someone to offer assistance. Are you at least getting the "Matrix Inside" wording under the Xbox logo?

    An easy way to test is to flash to bank 4. You will see two 256k slots. Flash the 256k bios to these two slots and make sure your dipswitches are set to bank 4. Reboot and see if you get the "Matrix Inside" wording. If still no, reset your chip and try again.
     
    Last edited: Sep 20, 2004
  4. rfjr23

    rfjr23 Member

    Joined:
    Sep 6, 2004
    Messages:
    37
    Likes Received:
    0
    Trophy Points:
    16
    How do u know if it is hooked up right...The D0 point can be a problem....is it lined up right..just a hair off will not let it work
     

Share This Page