Okay I'll try to post as much information as I can and thank you to anyone reading this. I tried following the textbook's tutorial step by step. Using the following Samsung ms28 drive Xtreme Boot Maker V.0.3.6 SYBA SY-VIA-150 PCI SATA / IDE Combo Controller Card, Non Raid - Retail 1. I plugged in the PCI card into my PCI slot and installed the drivers using the CD. 2. Used Xtreme Boot Maker to make a bootable drive on C: Xtreme bootmaker found my raid card I selected the options for ms28 including bad flash and Boke's patch. 3. When I boot up and enter samread xxxxx yyyy (xxxx yyyy being my serial number) it goes into MTKflash and there are two options 1. Primary 2. Secondary There is no hacked or my controller card displayed I tried using both primary and secondary to read my original bin but no go...it just hangs there with a blinking underscore... Anyone else come into the same type of problem with this card. I heard this is soppose to be the best card for flashing that is why I bought it.