1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

need help with backups

Discussion in 'DVD Shrink forum' started by FEARDIZ, Dec 10, 2004.

  1. FEARDIZ

    FEARDIZ Member

    Joined:
    Dec 8, 2004
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    I'm having problems backing up dvd movies.
    I was using DVD Xcopy, mostly with not errors, but tward the end of the movie it would stop working when I watched it.
    So I found dvd shrink 3.2.0.15 and dvd decrypter 3.5.1.0..
    I've tried using dvd shrink then have decrypter burn the movie.. I get i/o error
    device 1:0:0 TSSTcorp dc/dvdw ts-h542a
    interpretation : check condition
    blah blah.. I bought new media Memorex 8x dvd+r

    then try to rip with decrypter with directions from http://forums.afterdawn.com/thread_view.cfm/129157

    then use shrink to shrink the file, and nero to burn it.. everything works fine until I try to watch the movie.
    The fbi warnings appear then nothing.. doesn't play the movie.

    durning the shrink step the enable video preview works fine.. I see the movie. I just can't play it.

    I hope I didn't ramble too much.. thanks for any help..
    and here is nero log

    Me

    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.25
    Adapter driver: <Virtual Device> HA -1
    Drive buffer :
    CD-ROM: <COMBO IDE5216CO >Version: 0K52 - HA 1 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H542A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : COMBO IDE5216CO atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H542 D: CDRom0
    COMBO IDE5216CO E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 317MB (324900kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    23.10.2004
    CD Copy
    2:59:41 PM #1 Text 0 File Reader.cpp, Line 126
    Reader running

    2:59:41 PM #2 Phase 48 File dlgbrnst.cpp, Line 1855
    Analyzing disc

    2:59:41 PM #3 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    2:59:42 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1896
    The CD is copyrighted

    2:59:42 PM #5 Text 0 File CDCopy.cpp, Line 2116
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 0 0 ( 0:02.00) 250317 250316 ( 55:39.41)

    2:59:42 PM #6 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 0 - 250317 = 250317, data (TRM_DATA_MODE1, block size 2048)

    2:59:42 PM #7 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using CD-R/RW media

    2:59:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2147483646 (477218:37.21)
    Last address to be written: 250316 ( 55:39.41)

    2:59:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    2:59:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    2:59:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:59:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 250317 (250317) = #250317/55:37.42
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 250317 blocks [ Image Recorder ]
    --------------------------------------------------------------

    3:00:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 512956416, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    250317 | lead-out | 1 | 0x00 | 0x41

    3:00:01 PM #14 Phase 65 File dlgbrnst.cpp, Line 1855
    Burn process started

    3:00:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    3:02:08 PM #16 Text 0 File WriterStatus.cpp, Line 115
    < Image Recorder > start writing Lead-Out at LBA 250317 (3D1CDh), lenght 0 blocks

    3:02:08 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    3:02:09 PM #18 Phase 66 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 2/1/2004 2:10:06 PM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Me

    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H542A>Version: TS01 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <COMBO IDE5216CO >Version: 0K52 - HA 1 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H542A atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : COMBO IDE5216CO atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H542 D: CDRom0
    COMBO IDE5216CO E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 78MB (80248kB)
    Memory in use : 84 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.12.2004
    Burn DVD Image
    11:04:55 AM #1 Text 0 File Reader.cpp, Line 126
    Reader running

    11:04:55 AM #2 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H542A running

    11:04:55 AM #3 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    11:04:55 AM #4 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2217875 (492:51.50, 4331MB)

    11:04:55 AM #5 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    11:04:55 AM #6 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H542A, Media type: DVD+R
    Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    11:04:55 AM #7 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:04:55 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2217876 (2217876) = #2217876/492:51.51
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2217876 blocks [TSSTcorp CD/DVDW TS-H542A]
    --------------------------------------------------------------

    11:04:55 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H542A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4542210048, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2217876 | lead-out | 1 | 0x00 | 0x41

    11:04:56 AM #10 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    11:04:56 AM #11 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    11:04:56 AM #12 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    11:04:56 AM #13 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 12x (16,620 KB/s)

    11:04:56 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:04:56 AM #15 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: YUDEN000
    Media type ID: T02
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
    23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    11:04:56 AM #16 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 4:41,011 (281011ms) -> OK

    11:04:56 AM #17 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:29:47 AM #18 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H542A> start writing Lead-Out at LBA 2217876 (21D794h), lenght 0 blocks

    11:29:47 AM #19 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    11:30:13 AM #20 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    11:30:13 AM #21 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    11:30:13 AM #22 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 12x (16,620 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 2/1/2004 1:10:06 PM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Me

    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H542A>Version: TS01 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <COMBO IDE5216CO >Version: 0K52 - HA 1 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H542A atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : COMBO IDE5216CO atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H542 D: CDRom0
    COMBO IDE5216CO E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 87MB (89216kB)
    Memory in use : 82 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.12.2004
    Burn DVD Image
    12:57:49 PM #1 Text 0 File Reader.cpp, Line 126
    Reader running

    12:57:49 PM #2 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H542A running

    12:57:49 PM #3 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    12:57:49 PM #4 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2217875 (492:51.50, 4331MB)

    12:57:49 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    12:57:49 PM #6 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H542A, Media type: DVD+R
    Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
    Disc Application Code: 0, Extended Information Indicators: 3

    12:57:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:57:49 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2217876 (2217876) = #2217876/492:51.51
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2217876 blocks [TSSTcorp CD/DVDW TS-H542A]
    --------------------------------------------------------------

    12:57:49 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H542A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4542210048, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2217876 | lead-out | 1 | 0x00 | 0x41

    12:57:49 PM #10 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    12:57:49 PM #11 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    12:57:49 PM #12 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    12:57:49 PM #13 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 8x (11,080 KB/s)

    12:57:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    12:57:49 PM #15 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: PRODISC.
    Media type ID: R03
    Product revision number: 3
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
    23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
    01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    12:57:49 PM #16 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 6:59,016 (419016ms) -> OK

    12:57:49 PM #17 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    1:22:20 PM #18 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H542A> start writing Lead-Out at LBA 2217876 (21D794h), lenght 0 blocks

    1:22:21 PM #19 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:22:47 PM #20 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    1:22:47 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    1:22:47 PM #22 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 2/1/2004 1:10:06 PM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Me

    serial removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H542A>Version: TS01 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <COMBO IDE5216CO >Version: 0K52 - HA 1 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H542A atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : COMBO IDE5216CO atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H542 D: CDRom0
    COMBO IDE5216CO E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 83MB (85024kB)
    Memory in use : 83 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.12.2004
    Burn DVD Image
    5:45:03 PM #1 Text 0 File Reader.cpp, Line 126
    Reader running

    5:45:03 PM #2 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H542A running

    5:45:03 PM #3 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    5:45:03 PM #4 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2217875 (492:51.50, 4331MB)

    5:45:03 PM #5 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    5:45:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H542A, Media type: DVD+R
    Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
    Disc Application Code: 0, Extended Information Indicators: 3

    5:45:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:45:03 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2217876 (2217876) = #2217876/492:51.51
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2217876 blocks [TSSTcorp CD/DVDW TS-H542A]
    --------------------------------------------------------------

    5:45:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H542A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4542210048, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2217876 | lead-out | 1 | 0x00 | 0x41

    5:45:03 PM #10 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    5:45:03 PM #11 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    5:45:03 PM #12 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    5:45:03 PM #13 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 8x (11,080 KB/s)

    5:45:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    5:45:03 PM #15 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: PRODISC.
    Media type ID: R03
    Product revision number: 3
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
    23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
    01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    5:45:03 PM #16 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 6:59,016 (419016ms) -> OK

    5:45:03 PM #17 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:09:07 PM #18 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H542A> start writing Lead-Out at LBA 2217876 (21D794h), lenght 0 blocks

    6:09:07 PM #19 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    6:09:33 PM #20 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    6:09:33 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    6:09:33 PM #22 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 2/1/2004 1:10:06 PM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Dec 11, 2004
  2. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    5,088
    Likes Received:
    0
    Trophy Points:
    96
    Ok you are having a few problem that can be easily fixed.

    1) Get better media Memorex are the worst period...

    2)If you look at your Log's you are burning @ x8 speed you really need to slow this down to x4 at least

    3) Your Burner needs to be put in DMA mode

    Try those 3 things and you should have no more problems :)


    [​IMG] [​IMG]

    WinXP SP2
    AMD Athlon XP 2400+ (2.01GHz)
    1GB DDR 3200
    ATI All In Wonder 9600
    Burners Nec 2500A / Pioneer DVR 105

     
  3. FEARDIZ

    FEARDIZ Member

    Joined:
    Dec 8, 2004
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    what is dma mode and how do I change it?
     
  4. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    5,088
    Likes Received:
    0
    Trophy Points:
    96
    [bold]Changing Drives From PIO Mode to DMA[/bold]

    If the drive is not burning at the maximum speed, the IDE Controller the drive is attached to may be set to PIO mode and needs to be set to DMA.

    To enable DMA mode using the Device Manager

    1. Open Device Manager.

    2. Double-click IDE ATA/ATAPI Controllers to display the list of controllers and channels.

    3. Right-click the icon for the channel to which the device is connected, select Properties, and then click the Advanced Settings tab.

    4. In the Current Transfer Mode drop-down box, select DMA if Available if the current setting is "PIO Only."
    If the drop-down box already shows "DMA if Available" but the current transfer mode is PIO, then the user must toggle the settings. That is:

    • Change the selection from "DMA if available" to PIO only, and click OK.

    • Then repeat the steps above to change the selection to DMA if Available.

    DMA - Direct Memory Access/Addressing - Much faster and more reliable way to transfer Data

    PIO - Parallel Input/Output - Older and slower not as reliable as DMA


    [​IMG] [​IMG]

    WinXP SP2
    AMD Athlon XP 2400+ (2.01GHz)
    1GB DDR 3200
    ATI All In Wonder 9600
    Burners Nec 2500A / Pioneer DVR 105

     
  5. vurbal

    vurbal Administrator Staff Member

    Joined:
    Nov 30, 2002
    Messages:
    3,102
    Likes Received:
    0
    Trophy Points:
    66
    @FEARDIZ:
    Make sure you remove the serial number from your Nero logs when you post them ;) We don't want people stealing them here. I've taken care of it for you this time.
     
  6. FEARDIZ

    FEARDIZ Member

    Joined:
    Dec 8, 2004
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    ok thanks.. I'll reboot and try not to make another coaster.
    Should the image file still be ok to just burn with nero?
    Also some basic questions..
    shrink ONLY shrinks the size down
    and decrypter only decrypts and burns

    I'd like to burn all the movies to a image file so I can make copies directly from the image file, if I were to lose the org. backup..
    so I'd use decrpter and then shrink it so that should be fine??

    Is there any noticable difference when using shink in the quality settings?

    Thanks for the help
    FEARDIZ
     
  7. FEARDIZ

    FEARDIZ Member

    Joined:
    Dec 8, 2004
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    I changed the ide controller to dma and rebooted, but it doesn't seem to want to change from pio..
    I slowed down the speed to 4x and made another coaster.

    help..

    ====== *** Nero-Burning Rom, History File *** ======
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H542A>Version: TS01 - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <COMBO IDE5216CO >Version: 0K52 - HA 1 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H542A atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : COMBO IDE5216CO atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H542 D: CDRom0
    COMBO IDE5216CO E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 179MB (183652kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.12.2004
    Burn DVD Image
    11:17:09 AM #1 Text 0 File Reader.cpp, Line 126
    Reader running

    11:17:09 AM #2 Text 0 File Writer.cpp, Line 124
    Writer TSSTcorp CD/DVDW TS-H542A running

    11:17:09 AM #3 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    11:17:09 AM #4 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2217875 (492:51.50, 4331MB)

    11:17:09 AM #5 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    11:17:09 AM #6 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: TSSTcorp CD/DVDW TS-H542A, Media type: DVD+R
    Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
    Disc Application Code: 0, Extended Information Indicators: 3

    11:17:09 AM #7 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:17:09 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2217876 (2217876) = #2217876/492:51.51
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2217876 blocks [TSSTcorp CD/DVDW TS-H542A]
    --------------------------------------------------------------

    11:17:09 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [TSSTcorp CD/DVDW TS-H542A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4542210048, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2217876 | lead-out | 1 | 0x00 | 0x41

    11:17:09 AM #10 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    11:17:09 AM #11 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    11:17:09 AM #12 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    11:17:09 AM #13 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 4x (5,540 KB/s)

    11:17:10 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:17:10 AM #15 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: PRODISC.
    Media type ID: R03
    Product revision number: 3
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
    23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
    01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    11:17:10 AM #16 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 13:53,033 (833033ms) -> OK

    11:17:10 AM #17 Text 0 File DVDPlusRW.cpp, Line 628
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:38:58 AM #18 Text 0 File WriterStatus.cpp, Line 115
    <TSSTcorp CD/DVDW TS-H542A> start writing Lead-Out at LBA 2217876 (21D794h), lenght 0 blocks

    11:38:58 AM #19 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    11:39:29 AM #20 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    11:39:29 AM #21 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    11:39:29 AM #22 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 2/1/2004 1:10:06 PM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
  8. FEARDIZ

    FEARDIZ Member

    Joined:
    Dec 8, 2004
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    please help..
     
  9. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    5,088
    Likes Received:
    0
    Trophy Points:
    96
    Feardiz,

    Check out my site http://home.comcast.net/~bbmayo/

    Pick the guide on backing up with DVD Decrypter and DVD Shrink. Try your back up this way and see how that works? Then let me know how it worked out for you

    Good luck,

    [​IMG] [​IMG]
     
  10. FEARDIZ

    FEARDIZ Member

    Joined:
    Dec 8, 2004
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    i was using that way 1st.. the scubapete guide..
     

Share This Page