1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero 6 will not mount DVD-R/W

Discussion in 'Nero discussion' started by hornetman, Apr 23, 2007.

  1. hornetman

    hornetman Member

    Joined:
    Feb 5, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I have been using Nero 6 for a couple of years and have had no problems until lately. InCd will no longer "mount" the DVD-RAM or DVD-R/W disk it has been using for a while. No error messages, it just markes them as DVD-ROM and no free space. Windows reports the correct disk type in My Computer, but Nero InCd refuses to see the disk as a R/W. This is only for DVD's as the CD-R/W works fine. If I try to format a new disk, after I insert the new DVD-R/W, InCD reports the correct disk type and starts to format. After about 6 seconds, it reports format complete the says it is unable to write to disk because it is the wrong "type" of disk. A read of propertys shows it has been marked as a DVD-ROM with no free space. I have ruined 7 disk now trying different things (including unstalling Nero/InCd and re- installing the program) but nothing helps. I am using the same disk I have been using for 2 years. Has any one else had this experence? I e-mailed Nero 2 weeks ago with the Logs, but have had not response from them
     
  2. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    Hi.

    Post one of your log sections here.

    Nero InCD is a problem in and of itself. It can bring the burning of any disk by any program to its knees.

    What version of Nero are you using? 6.6.0.18 and 7.5.9.0, and maybe 7.8.5.0, seem to work best overall.

    When you reinstalled InCD, did you just reinstall that module or did you reinstall the entire Nero package?

    Did you run any of the Clean Tools before reinstalling?

    If not, uninstall the entire Nero suite, run the Nero Clean Tool and the Driver Clean Tool, and then reinstall Nero from a fresh download.

    http://www.nero.com/nero7/enu/Nero7_CleanTool.html
    http://www.nero.com/nero6/enu/Nero_6_CleanTool.html
    http://www.nero.com/nero6/enu/Driver_CleanTool_and_RegistryChecker.html
    http://www.nero.com/nero7/enu/Driver_CleanTool_and_RegistryChecker.html
    http://www.nero.com/nero6/eng/InCD_Clean_Tool.html

    Are you using any Roxio software like Easy Media Creator or any other packet writers like Drag to Disk, DLA, etc.?

    Have you change the RW disks you're using? Have you tried a different brand/manufacturer?
     
  3. hornetman

    hornetman Member

    Joined:
    Feb 5, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Yes to most of your questions. The big puzzle is that the drives,a Matshita LF-D311, and a LG GSA-4166B both work in all operations but formating DVD-R/W and reading all of my other previously formated -R/W disk. All are closed and marked ROM with no space left. I can format a new CD-R/W and it will mount the drive and read/write as advertised. If I try to format a new DVD, it marks the disk ROM and closes it thereby making it useless. I am using Nero Ultra 6 version 6.6.1.15. The DMA is turned on on both drives and windows reports they are working.
    Here is the Nero log file:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'F:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/02/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GSA-4166B D: CDRom0
    MATSHITA DVD-RAM LF-D311 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047344kB)
    Free physical memory: 440MB (450920kB)
    Memory in use : 56
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.4.2007
    UDF/ISO compilation
    11:34:38 AM #1 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    11:34:38 AM #2 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    11:34:38 AM #3 Text 0 File Isodoc.cpp, Line 6475
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:34:38 AM #4 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    11:34:38 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    11:34:38 AM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    11:34:38 AM #7 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRRW GSA-4166B running

    11:34:38 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    11:34:38 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    11:34:38 AM #10 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    11:35:34 AM #11 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    11:35:34 AM #12 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    11:35:34 AM #13 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: HL-DT-ST DVDRRW GSA-4166B, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    11:35:34 AM #14 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Compilation cannot be written on that medium type.
    (Medium in drive: DVD-ROM. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

    11:35:34 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRRW GSA-4166B]
    --------------------------------------------------------------

    11:35:34 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [HL-DT-ST DVDRRW GSA-4166B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    11:35:34 AM #17 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    11:35:34 AM #18 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    11:35:34 AM #19 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    11:35:34 AM #20 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    11:35:34 AM #21 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    11:35:34 AM #22 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5,540 KB/s)

    11:35:34 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:35:34 AM #24 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    11:35:34 AM #25 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:35:34 AM #26 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:49:59 AM #27 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRRW GSA-4166B> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

    11:50:00 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:50:00 AM #29 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was 2286127

    11:50:30 AM #30 Phase 37 File dlgbrnst.cpp, Line 1685
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 08/17/2001 3:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 08/14/2006 12:43:22 PM
    File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 06/13/2001 6:30:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 09/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 07/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 07/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 07/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'F:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/02/2004 12:54:32 PM

    NT-SPTI used
    Nero API version: 6.6.1.15
    Using interface version: 6.3.1.4
    Installed in: F:\Nero\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 1, 15

    Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.1.15
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GSA-4166B D: CDRom0
    MATSHITA DVD-RAM LF-D311 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047344kB)
    Free physical memory: 749MB (767192kB)
    Memory in use : 26
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.4.2007
    NeroAPI
    3:15:30 PM #1 Phase 112 File APIProgress.cpp, Line 275
    DVD-Video files reallocation started

    3:15:30 PM #2 Phase 114 File APIProgress.cpp, Line 275
    DVD-Video files reallocation completed (no file modified)

    3:15:30 PM #3 Phase 111 File APIProgress.cpp, Line 275
    DVD-Video files sorted

    3:15:30 PM #4 Text 0 File SCSIPTICommands.cpp, Line 403
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    3:15:30 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    3:15:30 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    3:15:30 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    3:15:30 PM #8 Text 0 File Burncd.cpp, Line 3316
    Turn on Disc-At-Once, using DVD media

    3:15:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    3:15:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO

    3:15:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
    Recorder: HL-DT-ST DVDRRW GSA-4166B, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    3:15:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:15:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRRW GSA-4166B]
    --------------------------------------------------------------

    3:15:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
    Prepare recorder [HL-DT-ST DVDRRW GSA-4166B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    3:15:31 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    3:15:31 PM #16 Phase 24 File APIProgress.cpp, Line 275
    Caching of files started

    3:15:31 PM #17 Text 0 File Burncd.cpp, Line 4158
    Cache writing successful.

    3:15:31 PM #18 Phase 25 File APIProgress.cpp, Line 275
    Caching of files completed

    3:15:31 PM #19 Phase 36 File APIProgress.cpp, Line 275
    Burn process started at 16x (22,160 KB/s)

    3:15:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:15:31 PM #21 Text 0 File DVDR.cpp, Line 2846
    Recording mode: Sequential Recording Mode

    3:15:31 PM #22 Text 0 File DVDR.cpp, Line 3002
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:15:31 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 178
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x04c401c0: Len x648

    3:15:31 PM #24 Text 0 File Cdrdrv.cpp, Line 8737
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:21:07 PM #25 SPTI -1093 File SCSIPassThrough.cpp, Line 178
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 03 C3 00 00 00 20 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02
    Buffer x30248740: Len x10000
    0x00 00 01 BA 44 3B E7 6F 4D B1 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 8F E7 37 CE 66 E2 CB 73 70
    0x6B B5 25 90 24 EB 5A 9E 0C EB E8 EB 4A 78 9E 7C

    3:21:07 PM #26 CDR -1093 File Writer.cpp, Line 281
    No seek complete
    D: HL-DT-ST DVDRRW GSA-4166B

    3:21:07 PM #27 Text 0 File DVDR.cpp, Line 3246
    EndDAO: Last written address was 246527

    3:21:07 PM #28 Phase 38 File APIProgress.cpp, Line 275
    Burn process failed at 16x (22,160 KB/s)

    3:21:08 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    3:21:08 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    3:21:08 PM #31 Text 0 File SCSIPTICommands.cpp, Line 253
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    3:21:16 PM #32 Text 0 File Cdrdrv.cpp, Line 9945
    DriveLocker: UnLockVolume completed

    3:21:16 PM #33 Text 0 File SCSIPTICommands.cpp, Line 403
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 08/17/2001 3:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 08/14/2006 12:43:22 PM
    File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 06/13/2001 6:30:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 09/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 03/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 03/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 03/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** NeroAPI, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'F:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/02/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.15
    Internal Version: 6, 6, 1, 15
    (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.1.15
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 6.6.1.15
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD1200JB-00DUA3 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GSA-4166B D: CDRom0
    MATSHITA DVD-RAM LF-D311 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047344kB)
    Free physical memory: 530MB (543212kB)
    Memory in use : 48
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    17.4.2007
    Burn DVD Image
    5:11:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    5:11:09 PM #2 Text 0 File Burncd.cpp, Line 3316
    Turn on Disc-At-Once, using DVD media

    5:11:09 PM #3 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286018 (508:00.18, 4464MB)

    5:11:09 PM #4 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    5:11:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 2616
    Recorder: HL-DT-ST DVDRRW GSA-4166B, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    5:11:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:11:09 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286019 (2286019) = #2286019/508:0.19
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286019 blocks [HL-DT-ST DVDRRW GSA-4166B]
    --------------------------------------------------------------

    5:11:09 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013
    Prepare recorder [HL-DT-ST DVDRRW GSA-4166B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681766912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286019 | lead-out | 1 | 0x41 | 0x00

    5:11:09 PM #9 Text 0 File SCSIPTICommands.cpp, Line 208
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:11:09 PM #10 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    5:11:09 PM #11 Text 0 File Burncd.cpp, Line 4158
    Cache writing successful.

    5:11:09 PM #12 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    5:11:09 PM #13 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (22,160 KB/s)

    5:11:09 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2717
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    5:11:09 PM #15 Text 0 File DVDR.cpp, Line 2846
    Recording mode: Sequential Recording Mode

    5:11:09 PM #16 Text 0 File DVDR.cpp, Line 3002
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:11:09 PM #17 SPTI -1066 File SCSIPassThrough.cpp, Line 178
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x080a0180: Len x648

    5:11:09 PM #18 Text 0 File Cdrdrv.cpp, Line 8737
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:17:37 PM #19 Text 0 File WriterStatus.cpp, Line 113
    <HL-DT-ST DVDRRW GSA-4166B> start writing Lead-Out at LBA 2286019 (22E1C3h), length 0 blocks

    5:17:37 PM #20 Text 0 File DVDR.cpp, Line 3246
    EndDAO: Last written address was 2286015

    5:18:07 PM #21 Phase 37 File dlgbrnst.cpp, Line 1685
    Burn process completed successfully at 16x (22,160 KB/s)

    5:18:08 PM #22 Text 0 File SCSIPTICommands.cpp, Line 253
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    5:18:15 PM #23 Text 0 File Cdrdrv.cpp, Line 9945
    DriveLocker: UnLockVolume completed

    5:18:15 PM #24 Text 0 File SCSIPTICommands.cpp, Line 403
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 08/17/2001 3:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 08/14/2006 12:43:22 PM
    File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 06/13/2001 6:30:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 09/27/2006 5:53:22 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 03/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 03/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 03/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Apr 23, 2007
  4. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    6.6.1.4 is one of the worst versions of Nero. Try 6.6.0.18 available here:

    Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
    Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe

    or

    Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
    Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

    Be sure to run all the Nero 6 Clean Tools after uninstalling the current version and before installing the new version above.


    In the first log section, the media is IDed as -R and then later (see below) as DVD-ROM.



    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)[/quote]

    Remember to set your target output size to 4400 in your authoring software. You're writing pretty close to the outer edge where you'll run into problems sooner or later.


    The above is a Roxio driver which can cause conflicts with Nero is some configurations. Use the Roxio Zapper to remove it and also run the Nero 6 Driver Clean Tool.

    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
    http://kb.roxio.com/content/kb/EE6000061
    http://www.nero.com/nero6/enu/Driver_CleanTool_and_RegistryChecker.html


    Edit out your name and Nero serial number at the beginning of each log section under the Burning ROM header.


    You might want to reconsider burning at 16X. 8X will reduce te chances of getting a bad burn.


    Do you use InCD a lot to copy things to RW disks? It really is a troublemaker for many people. Let's try this:

    - Uninstall your current Nero.
    - Run the Nero 6 Clean Tool, The InCD Clean Tool, and the Driver Clean Tool.
    - Just install the two Nero 6.6.0.18 packages above. InCD is not included to the best of my knowledge.
    - See if Nero Burning ROM will recognize and format your RW disks.
    - also try a Verbatim RW disk. TDK is not a top quality disk maker any longer imo.


    You could also try going back to an earlier restore point when you know things worked. There may just be some software/driver added causing a conflict that the Driver Clean Tool can't pick up.
     
  5. hornetman

    hornetman Member

    Joined:
    Feb 5, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Sorry about the late reply laddyboy, but I had to go out of town. I did everything you suggested and nothing has changed. I am beginning to think something has gone wrong with my Bios or something. After all the cleaning and re-installing, I put in a new DVD-R/W disk and Nero reported the correct type disk and I began to format it. This time it did the full format of about 45 minutes an I thought everything was good. After it completed formatting, I ejected the disk and the drive wrote again and "closed" the disk marking it as DVD-ROM. Another coaster! Everything else is working as long as I don't want to erase and write to a DVD or CD R/W disk. I can format a CD-R/W and it works fine, but Nero will not reconize a formally formatted disk as a R/W. All disk will still read and display the data and the DVD-R write funcion works fine. I have unstalled each drive and disconnected each one at a time and re-installed and get the same results. I thought on of the drives was going bad. I am about all out of ideas. I just should not be this hard!!
     
  6. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    If you've tried an earlier restore point and other RW media, the only other thing I can suggest is reformatting your system hard disk and reintalling the OS. I keep a ghosted copy of my OS on another hard drive to expedite the process and rehabilitate a couple times a year. It saves mucho time. Reformatting and reinstalling should solve the problem as long as it isn't a hardware problem and you don't reload any conflicting software.
     
  7. hornetman

    hornetman Member

    Joined:
    Feb 5, 2007
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for your help, but it is just not that important. I have moved for R/W disk to USB drives and external hard drives for my backup solutions. I have found that using these disk always causes problems sooner or later.The same software and disk work properly on my backup computer. It has got to be a driver that is in conflict with Nero or something in my board. I was hoping someone else had seen the problem and knew the solution, but its just one of those things that is specific to mu computer. I just wish Nero would publish a list of known conflicts so we would have a place to start.
    Thanks again for your help
     
  8. laddyboy

    laddyboy Regular member

    Joined:
    Jan 4, 2005
    Messages:
    4,188
    Likes Received:
    0
    Trophy Points:
    46
    You're welcome. Sorry we couldn't find an easy fix.
     

Share This Page