1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero 7 Premium burns but DVD won't read

Discussion in 'Nero discussion' started by lswetland, Jun 28, 2007.

  1. lswetland

    lswetland Member

    Joined:
    Jun 28, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Hi. I hope someone can help. I have been able to successfully burn security copies of my DVDs using DVD Shrink and Nero for about a year or so. But not anymore :-( I have the Cyberhome DX162D burner on a Dell Dimension 3000. Now, using either Nero 7 Premium or CD Burner XP Pro 3 Freeware - the DVD obviously burns but the DVD player doesn't recognize anything - and - when I use the DVD drive on the PC - I get a pop up that the disc is unrecognizable so can't even look at the contents on it. Generally I use Fujifilm DVD-R media. I have attached a discinfo summary - I am ready to throw the entire PC off of the balcony, so if you can help, you might be able to spare its pathetic life. Thanks, nebraskaboy

    DISCINFO VERSION : 1.6.1.6
    VENDOR : HL-DT-ST
    MODEL : CD-RW GCE-8483B
    REVISION : B105
    LOADING MECHANISM : Tray
    NUMBER VOL. LEVELS : 255
    BUFFER SIZE : 2048KB
    INTERFACE : ATAPI
    RPC2 SCHEME : NO
    ANALOG AUDIO PLAY : YES
    COMPOSITE OUTPUT : NO
    DIGITAL PORT-PORT1 : NO
    DIGITAL PORT-PORT2 : NO
    READ UPC CODE : YES
    MULTISESSION READ : YES
    MODE 2 FORM 1 : YES
    MODE 2 FORM 2 : YES
    READ ISRC CODE : YES
    READ BAD CODE : NO
    BUFFER UNDER-RUN : YES
    MT. RAINIER : NO
    CAN READ CDR : YES
    CAN READ CDRW : YES
    CAN READ CDRM2 : YES
    CAN WRITE CDR : YES
    CAN WRITE CDRW : YES
    CAN TEST WRITE : YES
    CAN READ DVD-ROM : NO
    CAN READ DVD-R : NO
    CAN READ DVD-RW : NO
    CAN READ DVD-RAM : NO
    CAN READ DVD+R : NO
    CAN READ DVD+RW : NO
    CAN WRITE DVD-R : NO
    CAN WRITE DVD-RW : NO
    CAN WRITE DVD-RAM : NO
    CAN WRITE DVD+R : NO
    CAN WRITE DVD+RW : NO
    MAX CDR READ SPEED : 48
    MAX CDR WRITE SPEED: 48

    DISCINFO VERSION : 1.6.1.6
    VENDOR : DVDR/RW
    MODEL : DX162D-A
    REVISION : 140F
    VENDOR SPECIFIC : 124<
    LOADING MECHANISM : Tray
    NUMBER VOL. LEVELS : 2
    BUFFER SIZE : 2048KB
    INTERFACE : ATAPI
    RPC2 SCHEME : YES
    STATUS : Set
    USER CHANGES : 4
    VENDOR CHANGES : 4
    CURRENT REGION : 1
    ANALOG AUDIO PLAY : YES
    COMPOSITE OUTPUT : NO
    DIGITAL PORT-PORT1 : YES
    DIGITAL PORT-PORT2 : NO
    READ UPC CODE : YES
    MULTISESSION READ : YES
    MODE 2 FORM 1 : YES
    MODE 2 FORM 2 : YES
    READ ISRC CODE : YES
    READ BAD CODE : NO
    BUFFER UNDER-RUN : YES
    MT. RAINIER : NO
    CAN READ CDR : YES
    CAN READ CDRW : YES
    CAN READ CDRM2 : YES
    CAN WRITE CDR : YES
    CAN WRITE CDRW : YES
    CAN TEST WRITE : YES
    CAN READ DVD-ROM : YES
    CAN READ DVD-R : YES
    CAN READ DVD-RW : YES
    CAN READ DVD-RAM : NO
    CAN READ DVD+R : YES
    CAN READ DVD+RW : YES
    CAN WRITE DVD-R : YES
    CAN WRITE DVD-RW : YES
    CAN WRITE DVD-RAM : NO
    CAN WRITE DVD+R : YES
    CAN WRITE DVD+RW : YES
    MAX CDR READ SPEED : 40
    MAX CDR WRITE SPEED: 40
     
  2. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,504
    Likes Received:
    29
    Trophy Points:
    128
  3. lswetland

    lswetland Member

    Joined:
    Jun 28, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Dear Attar,

    Thank you for being willing to try and help. I have pasted in what I think is the log. I have found that neither the DVD Shrink/Nero 7 combination and the DVD Decrypter/DVD Clone 2 - result in a burned DVD that works in either the PC or my DVD player. Interestingly, when I finish the Nero burn and then put the disc back in the drive on the PC, I look at MY COMPUTER, and is says that drive is a CD drive; when I eject the disc, the drive shows again as a DVD drive?

    But here is the log and thanks for anything you can do to offer my PC a stay of execution (meaning, a launch off the balcony...) Luke

    ====== *** Nero Burning ROM, History File *** ======




    1C82-0000-19E5-MAAX-4009-1375-****

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.9.6.0
    Internal Version: 7, 9, 6, 0

    Recorder: <DVDR/RW DX162D-A> Version: 140F - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <DVDR/RW DX162D-A >Version: 140F - HA 1 TA 0 - 7.9.6.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVDR/RW DX162D-A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDR/RW DX162D-A D: CdRom0
    HL-DT-ST CD-RW GCE-8483B E: CdRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 509MB (522224kB)
    Free physical memory: 214MB (219516kB)
    Memory in use : 57
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.7.2007
    UDF/ISO compilation
    5:55:24 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    5:55:24 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
    DVD-Video files reallocation started

    5:55:24 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
    DVD-Video files reallocation completed (no file modified)

    5:55:25 PM #4 Text 0 File Isodoc.cpp, Line 6663
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    5:55:25 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
    DVD-Video files sorted

    5:55:25 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    5:55:25 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    5:55:25 PM #8 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    5:55:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1482543 (329:27.18, 2895MB)

    5:55:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    5:55:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 2964
    Recorder: DVDR/RW DX162D-A, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    Disc Application Code: 64, Disc Physical Code: 193

    5:55:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:55:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1482544 (1482544) = #1482544/329:27.19
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1482544 blocks [D: DVDR/RW DX162D-A]
    --------------------------------------------------------------

    5:55:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: DVDR/RW DX162D-A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3036250112, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1482544 | 0 | 0x00
    1482544 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    5:55:25 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    5:55:25 PM #16 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    5:55:25 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    5:55:25 PM #18 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    5:55:25 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    5:55:25 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    5:55:25 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:55:25 PM #22 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    5:55:25 PM #23 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:55:25 PM #24 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: -
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:55:25 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 74390400

    6:28:21 PM #26 Text 0 File WriterStatus.cpp, Line 113
    <D: DVDR/RW DX162D-A> start writing Lead-Out at LBA 1482544 (169F30h), length 0 blocks

    6:29:10 PM #27 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 1482543 (169F2Fh)

    6:29:10 PM #28 Phase 37 File dlgbrnst.cpp, Line 1762
    Burn process completed successfully at 4x (5,540 KB/s)

    6:29:11 PM #29 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    6:29:12 PM #30 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    6:29:12 PM #31 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======
     
  4. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,504
    Likes Received:
    29
    Trophy Points:
    128
    To my eye it looks like a model burn.
    The only thing I would suggest is buying a pack of 'Verbatim' or something that says 'Made in Japan'.
    Your disks are
    and I have had problems of my own with Ritek, although not as consistently bad as you..

    BTW can you burn a CD or a data DVD disk?
     
  5. lswetland

    lswetland Member

    Joined:
    Jun 28, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for looking over the log.

    I am able to burn CDs and data DVDs so it wasn't the drive.

    I was using Fujifilm DVDs and then tried Memorex and then Maxell.

    It looks like using the Maxell media and CLONE DVD 2 (rather than Nero)is working fine - nine burns and counting!!!

    Yippee. So thanks, I think I will just stick with CLONE DVD 2 for the time being.

    Truly appreciate that this forum exists and that experienced people like you are willing to share your time and expertise.

    Luke
     

Share This Page