1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero: Burn process failed.... why?

Discussion in 'Audio' started by modtang, Aug 27, 2004.

  1. modtang

    modtang Member

    Joined:
    Jun 10, 2003
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    I can't complain as this is the first time in many years I've made a coaster, and the first time I've ever done it with a DVD-R. I've got no clue what this log file is trying to tell me so I was hoping someone could interpret it for me. :)

    JFTR, I'm using the same blanks I've used many times before (same batch, too) and I always burn at 4x with no problems EVER until now. FYI I was burning a DVD I reauthored with DVD Shrink.

    Thanks in advance! :)

    ----
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 AM
    ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero version: 6.3.1.20
    Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SONY DVD RW DRU-510A >Version: 1.1a - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380011A nvatabus Port 0 ID 0 DMA: Off
    DiskPeripheral : FUJITSU MPB3032ATU nvatabus Port 0 ID 1 DMA: Off
    CdRomPeripheral : SONY DVD RW DRU-510A nvatabus Port 0 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SONY DVD RW DRU-510A E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 188MB (192812kB)
    Memory in use : 63 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.8.2004
    UDF/ISO compilation
    4:36:21 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    4:36:21 PM #2 Phase 111 File dlgbrnst.cpp, Line 1855
    DVD-Video files sorted

    4:36:22 PM #3 Text 0 File Reader.cpp, Line 126
    Reader running

    4:36:22 PM #4 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DRU-510A running

    4:36:22 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:36:22 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:36:22 PM #7 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    4:36:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2141199 (475:49.24, 4182MB)

    4:36:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    4:36:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
    Disc Manufacturer: RITEKG - 04
    Disc Application Code: 64, Disc Physical Code: 193

    4:36:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:36:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2141200 (2141200) = #2141200/475:49.25
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2141200 blocks [SONY DVD RW DRU-510A ]
    --------------------------------------------------------------

    4:36:22 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4385177600, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2141200 | lead-out | 1 | 0x00 | 0x41

    4:36:22 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    4:36:23 PM #15 Text 0 File Burncd.cpp, Line 4183
    Cache writing successful.

    4:36:23 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    4:36:23 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 4x (5,540 KB/s)

    4:36:23 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:36:23 PM #19 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 13:17,958 (797958ms) -> OK

    4:36:23 PM #20 Text 0 File DVDR.cpp, Line 1942
    Recording mode: Sequential Recording Mode

    4:36:23 PM #21 Text 0 File Mmc.cpp, Line 20531
    Set BUFE: Power-Burn -> ON

    4:36:23 PM #22 Text 0 File DVDR.cpp, Line 2083
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:36:23 PM #23 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    4:36:29 PM #24 Text 0 File Cdrdrv.cpp, Line 1294
    16:36:29.921 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    4:39:29 PM #25 CDR -25 File Writer.cpp, Line 304
    Queue again later
    SONY DVD RW DRU-510A\H1 T0

    4:39:29 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    4:39:30 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    4:39:30 PM #28 Text 0 File DVDR.cpp, Line 2325
    EndDAO: Last written address was 2239

    4:47:17 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    4:47:17 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    4:47:17 PM #31 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
    File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 8:24:08 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/24/2004 7:00:41 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    757
    Likes Received:
    0
    Trophy Points:
    26
    Hi Modtang,

    Has anything, anything at all, changed in your systems configuration recently? New hardware or software installled?

    The Nero Log file is reporting a Queueing error, which means the recorder is busy and will not accept any commands. If this continues, it eventually times-out and reports an error message.

    How is your recorder connected to the system? Your Nero Log file fails to show an Adaptor driver, which would normally indicate a USB or Firewire connection. However, the DMA setting shows OFF. And normally it would show with a '?' mark next to the DMA setting for USB or Firewire. So it's causing me some confusion. :)

    If you do have USB or Firewire, have you added any new devices to the bus recently? Or changes cables, etc?

    Regards,

    Craig
     
  3. non_true

    non_true Member

    Joined:
    Sep 25, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    modtang.. i have a dru510a and have apparently the exact same problem... everything was working find until some strange day.. i had burnt one dvd then soon after i tried another and i get a coaster.. same media and everything.. i updated the firmware to 1.1a after that but still nothing.. then i thought maybe it was service pack 2s fault.. so i reinstalled windows.. and still the the error with sp1.. i just tried burning the exact same dvd unto a rewritable and it worked fine.. i have no idea what is causing this or why it would start up randomly.. i'll keep trying different things and running my simulations until i figure it out.. please let me know if you figure anything out yourself.. its driving me crazy:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero version: 6.3.1.25
    Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 1 TA 0 - 6.3.1.25
    Adapter driver: <atapi> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <JLMS XJ-HD166S >Version: DS18 - HA 1 TA 1 - 6.3.1.25
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-510A F: CDRom0
    JLMS XJ-HD166S G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048044kB)
    Free physical memory: 586MB (600328kB)
    Memory in use : 42 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    25.9.2004
    UDF/ISO compilation
    2:10:07 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
    DVD-Video files reallocation started

    2:10:07 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
    DVD-Video files reallocation completed (no file modified)

    2:10:07 PM #3 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : FALSE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    2:10:08 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
    DVD-Video files sorted

    2:10:08 PM #5 Text 0 File Reader.cpp, Line 126
    Reader running

    2:10:08 PM #6 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DRU-510A running

    2:10:08 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    2:10:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    2:10:08 PM #9 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    2:10:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2271327 (504:44.27, 4436MB)

    2:10:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    2:10:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
    Disc Manufacturer: LONGTE - N 001
    Disc Application Code: 64, Disc Physical Code: 193

    2:10:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:10:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2271328 (2271328) = #2271328/504:44.28
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2271328 blocks [SONY DVD RW DRU-510A ]
    --------------------------------------------------------------

    2:10:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4651679744, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2271328 | lead-out | 1 | 0x00 | 0x41

    2:10:08 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    2:10:08 PM #17 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    2:10:08 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    2:10:08 PM #19 Phase 32 File dlgbrnst.cpp, Line 1855
    Simulation started at 4x (5,540 KB/s)

    2:10:09 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:10:09 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 14:04,936 (844936ms) -> OK

    2:10:09 PM #22 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode

    2:10:09 PM #23 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: Power-Burn -> ON

    2:10:09 PM #24 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:10:09 PM #25 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:10:13 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:13.015 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:56 PM #27 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:56.765 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #28 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.375 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #29 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.421 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #30 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.468 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #31 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.515 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #32 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.562 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #33 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.609 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:10:57 PM #34 Text 0 File Cdrdrv.cpp, Line 1297
    14:10:57.656 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:11:28 PM #35 Text 0 File Cdrdrv.cpp, Line 1297
    14:11:28.515 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:11:28 PM #36 Text 0 File Cdrdrv.cpp, Line 1297
    14:11:28.578 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:11:34 PM #37 Text 0 File Cdrdrv.cpp, Line 1297
    14:11:34.281 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:12:11 PM #38 Text 0 File Cdrdrv.cpp, Line 1297
    14:12:11.828 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:12:11 PM #39 Text 0 File Cdrdrv.cpp, Line 1297
    14:12:11.875 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:12:31 PM #40 Text 0 File Cdrdrv.cpp, Line 1297
    14:12:31.265 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:12:31 PM #41 Text 0 File Cdrdrv.cpp, Line 1297
    14:12:31.546 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:12:49 PM #42 Text 0 File Cdrdrv.cpp, Line 1297
    14:12:49.359 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:12:54 PM #43 Text 0 File Cdrdrv.cpp, Line 1297
    14:12:54.109 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:13:24 PM #44 Text 0 File Cdrdrv.cpp, Line 1297
    14:13:24.890 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:13:26 PM #45 Text 0 File Cdrdrv.cpp, Line 1297
    14:13:26.906 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:13:26 PM #46 Text 0 File Cdrdrv.cpp, Line 1297
    14:13:26.953 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:14:04 PM #47 Text 0 File Cdrdrv.cpp, Line 1297
    14:14:04.437 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:14:41 PM #48 Text 0 File Cdrdrv.cpp, Line 1297
    14:14:41.968 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:14:42 PM #49 Text 0 File Cdrdrv.cpp, Line 1297
    14:14:42.046 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:15:19 PM #50 Text 0 File Cdrdrv.cpp, Line 1297
    14:15:19.546 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:15:37 PM #51 Text 0 File Cdrdrv.cpp, Line 1297
    14:15:37.109 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:15:57 PM #52 Text 0 File Cdrdrv.cpp, Line 1297
    14:15:57.062 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:15:57 PM #53 Text 0 File Cdrdrv.cpp, Line 1297
    14:15:57.109 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:16:04 PM #54 Text 0 File Cdrdrv.cpp, Line 1297
    14:16:04.609 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:16:34 PM #55 Text 0 File Cdrdrv.cpp, Line 1297
    14:16:34.609 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:16:48 PM #56 Text 0 File Cdrdrv.cpp, Line 1297
    14:16:48.390 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:16:48 PM #57 Text 0 File Cdrdrv.cpp, Line 1297
    14:16:48.671 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:17:12 PM #58 Text 0 File Cdrdrv.cpp, Line 1297
    14:17:12.140 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:17:12 PM #59 Text 0 File Cdrdrv.cpp, Line 1297
    14:17:12.171 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:17:49 PM #60 Text 0 File Cdrdrv.cpp, Line 1297
    14:17:49.671 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:18:08 PM #61 Text 0 File Cdrdrv.cpp, Line 1297
    14:18:08.187 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:18:27 PM #62 Text 0 File Cdrdrv.cpp, Line 1297
    14:18:27.203 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:18:27 PM #63 Text 0 File Cdrdrv.cpp, Line 1297
    14:18:27.296 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:19:04 PM #64 Text 0 File Cdrdrv.cpp, Line 1297
    14:19:04.734 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:19:28 PM #65 Text 0 File Cdrdrv.cpp, Line 1297
    14:19:28.250 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:19:42 PM #66 Text 0 File Cdrdrv.cpp, Line 1297
    14:19:42.265 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:20:19 PM #67 Text 0 File Cdrdrv.cpp, Line 1297
    14:20:19.781 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:20:19 PM #68 Text 0 File Cdrdrv.cpp, Line 1297
    14:20:19.812 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:20:57 PM #69 Text 0 File Cdrdrv.cpp, Line 1297
    14:20:57.328 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:21:34 PM #70 Text 0 File Cdrdrv.cpp, Line 1297
    14:21:34.859 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:21:34 PM #71 Text 0 File Cdrdrv.cpp, Line 1297
    14:21:34.953 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:22:12 PM #72 Text 0 File Cdrdrv.cpp, Line 1297
    14:22:12.421 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:22:49 PM #73 Text 0 File Cdrdrv.cpp, Line 1297
    14:22:49.953 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:22:50 PM #74 Text 0 File Cdrdrv.cpp, Line 1297
    14:22:50.015 - SONY DVD RW DRU-510A\H1 T0 : Queue again later

    2:24:29 PM #75 SCSI -1135 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A60000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x08
    CDB Data: 0x2A 0x00 0x00 0x21 0x1F 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x03 0x00 0x21 0x17 0x20 0x12
    0x00 0x00 0x00 0x00 0x0C 0x08

    2:24:29 PM #76 CDR -1135 File Writer.cpp, Line 304
    Write error

    2:24:29 PM #77 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    2:24:29 PM #78 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    2:24:29 PM #79 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 2170847

    2:24:29 PM #80 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    2:24:29 PM #81 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    2:24:29 PM #82 Phase 34 File dlgbrnst.cpp, Line 1855
    Simulation failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  4. modtang

    modtang Member

    Joined:
    Jun 10, 2003
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    11
    It's only happened to me that one time. Plus the other night I was trying to burn 2 DivX files onto a CD-R and I got error after error but I got past that one as well (I'm sure it was a dodgy disk, even though I buy TDKs). I've upgraded Nero since the original post so I think that fixed whatever it was. It may have even been a dodgy install on my end. Not 100% sure and I guess I will never know now. Here's the log. It says something about fixation. I had it happen years ago with an old CD burner but I never figured out exactly what caused it. =/

    ====== *** Nero-Burning Rom, History File *** ======
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM
    Nero version: 6.3.1.20
    Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <atapi> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-510A >Version: 1.1a - HA 1 TA 0 - 6.3.1.20
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : FUJITSU MPB3032ATU atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-510A F: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523764kB)
    Free physical memory: 124MB (127532kB)
    Memory in use : 75 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.9.2004
    CD-ROM (ISO)
    3:38:57 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    3:38:57 PM #2 Phase 94 File dlgbrnst.cpp, Line 1855
    Power-Burn activated

    3:38:57 PM #3 Text 0 File Reader.cpp, Line 126
    Reader running

    3:38:57 PM #4 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DRU-510A running

    3:38:57 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    3:38:57 PM #6 Text 0 File Burncd.cpp, Line 3173
    Turn on Track-at-once, using CD-R/RW media

    3:38:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 359845 ( 79:59.70)
    Last address to be written: 356108 ( 79:10.08)

    3:38:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    3:38:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: SONY DVD RW DRU-510A;
    CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
    ATIP Data:
    Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    3:38:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:38:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 356109 (356109) = #356109/79:8.9
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356107 blocks [SONY DVD RW DRU-510A ]
    --------------------------------------------------------------

    3:38:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [SONY DVD RW DRU-510A ] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 729618432, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    356109 | lead-out | 1 | 0x00 | 0x41

    3:38:58 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
    Removed 2 run-out blocks from end of track 1. Length: 356109 -> 356107.

    3:38:58 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    3:38:58 PM #15 Text 0 File Burncd.cpp, Line 4183
    Cache writing successful.

    3:38:58 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    3:38:58 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 24x (3,600 KB/s)

    3:38:58 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    3:38:58 PM #19 Text 0 File Mmc.cpp, Line 20531
    Set BUFE: Power-Burn -> ON

    3:41:01 PM #20 SCSI -1106 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05710000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x0F 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x73 0x03

    3:41:01 PM #21 CDR -1106 File Writer.cpp, Line 304
    Power calibration error

    3:41:01 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    3:41:01 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    3:41:01 PM #24 CDR -201 File WriterStatus.cpp, Line 196
    Invalid write state
    SONY DVD RW DRU-510A\H1 T0

    3:41:01 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 196
    Could not perform EndTrack

    3:41:01 PM #26 Text 0 File Mmc.cpp, Line 15356
    <SONY DVD RW DRU-510A > start Close Session

    3:41:01 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x24 0x00

    3:41:01 PM #28 CDR -1066 File WriterStatus.cpp, Line 245
    Invalid field in command

    3:41:01 PM #29 TRANSFER -19 File WriterStatus.cpp, Line 245
    [bold]Could not perform Fixation[/bold]

    3:41:01 PM #30 Text 0 File WriterStatus.cpp, Line 254
    falling back to disc fixation

    3:41:01 PM #31 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    3:41:01 PM #32 Phase 38 File dlgbrnst.cpp, Line 1855
    [bold]Burn process failed at 24x (3,600 KB/s)[/bold]


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 20/09/2004 10:58:35 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1:27:50 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Sep 25, 2004
  5. ccampbell

    ccampbell Regular member

    Joined:
    Mar 24, 2004
    Messages:
    757
    Likes Received:
    0
    Trophy Points:
    26
    Hi Modtang,

    I see you resolved the DMA issue for your Sony Recorder, and that in iteself could have helped resolve your issue, maybe. :)

    And this last log file you provided now shows a Power Calibration error, instead of the Queueing error, and that's a whole different issue. You can type in Power Calibration Error in the Search feature of this forum and come up with a number of possible causes and solutions. Media being the most likely suspect.

    Regards,

    Craig

    Ahead Software
    USA
     

Share This Page