Hi all, I have been burning CD-Rs and DVD-Rs for months without errors, but I just got this problem several days ago: After some minutes, burning failed, with "Could not perform EndTrack" error message. I used Nero 6.0.0.0 before. After upgrading to 6.6.1.4, I still got the same error message. My system spec: --------------- Burner H/W: Pioneer DVR-112 Firmware 1.09 Media: TDK CD-R (I have previously used 20s of 50 in the spindle, with no errors) Burner S/W: Nero 6.6.1.4 O/S: Windows XP SP2 System ASPI: not installed Nero ASPI: installed and working properly Mobo: Asus CUV4x-D VCore1: 1.71V VCore2: 1.69V +3.3V: 3.13V ---> there has been a red warning, but this has not been a problem in burning CDRs and DVDs for months +5V: 4.91V +12V: 12.28V Here is Nero's log: ---------------- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'D:\Programs\BackupTools\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: Version: 1.09 - HA 1 TA 0 - 6.6.1.4 Adapter driver: HA 1 Drive buffer : 2000kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: Version: 2.2 - HA 1 TA 1 - 6.6.1.4 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : QUANTUM FIREBALLP AS20.5 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-112 atapi Port 1 ID 0 DMA: On CdRomPeripheral : ASUS DVD-ROM E616 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-112 F: CDRom0 ASUS DVD-ROM E616 G: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523804kB) Free physical memory: 161MB (165432kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.7.2007 CD-ROM (ISO) 9:28:36 AM #1 Text 0 File Isodoc.cpp, Line 6475 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:28:37 AM #2 Text 0 File Burncd.cpp, Line 3012 PIONEER DVD-RW DVR-112 Buffer underrun protection activated 9:28:37 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 9:28:37 AM #4 Text 0 File Reader.cpp, Line 124 Reader running 9:28:37 AM #5 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-112 running 9:28:37 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:29:30 AM #7 Text 0 File Burncd.cpp, Line 3305 Turn on Track-At-Once, using CD-R/RW media 9:29:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 359844 ( 79:59.69) Last address to be written: 277843 ( 61:46.43) 9:29:32 AM #9 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 9:29:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: PIONEER DVD-RW DVR-112 9:29:32 AM #11 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:29:32 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 277844 (277844) = #277844/61:44.44 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 277842 blocks [PIONEER DVD-RW DVR-112] -------------------------------------------------------------- 9:29:32 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [PIONEER DVD-RW DVR-112] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 569331712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 277844 | lead-out | 1 | 0x41 | 0x00 9:29:32 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127 Removed 2 run-out blocks from end of track 1. Length: 277844 -> 277842. 9:29:32 AM #15 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:29:32 AM #16 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:29:32 AM #17 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 9:30:31 AM #18 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 9:30:31 AM #19 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 9:30:31 AM #20 Phase 28 File dlgbrnst.cpp, Line 1685 Speed measurement started 9:30:31 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:31:28 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:31:29 AM #23 Phase 29 File dlgbrnst.cpp, Line 1634 Speed measurement completed: 69.3x (10,404 KB/s) 9:31:29 AM #24 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 32x (4,800 KB/s) 9:31:30 AM #25 SPTI -1189 File SCSIPassThrough.cpp, Line 289 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 02 Buffer x040e0200: Len x4000 9:31:31 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:31:31 AM #27 Text 0 File Mmc.cpp, Line 21840 Set BUFE: Buffer underrun protection -> ON 9:31:35 AM #28 Text 0 File Cdrdrv.cpp, Line 1200 09:31:35.375 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:52 AM #29 Text 0 File Cdrdrv.cpp, Line 1200 09:31:52.203 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:52 AM #30 Text 0 File Cdrdrv.cpp, Line 1200 09:31:52.234 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:52 AM #31 Text 0 File Cdrdrv.cpp, Line 1200 09:31:52.265 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:52 AM #32 Text 0 File Cdrdrv.cpp, Line 1200 09:31:52.281 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:52 AM #33 Text 0 File Cdrdrv.cpp, Line 1200 09:31:52.312 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:52 AM #34 Text 0 File Cdrdrv.cpp, Line 1200 09:31:52.343 - F: PIONEER DVD-RW DVR-112 : Queue again later .. .. <shortened, the same error messages here> .. .. 9:31:56 AM #125 Text 0 File Cdrdrv.cpp, Line 1200 09:31:56.734 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:56 AM #126 Text 0 File Cdrdrv.cpp, Line 1200 09:31:56.765 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:31:56 AM #127 Text 0 File Cdrdrv.cpp, Line 1200 09:31:56.796 - F: PIONEER DVD-RW DVR-112 : Queue again later 9:32:12 AM #128 SPTI -1135 File SCSIPassThrough.cpp, Line 289 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 42 C0 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 03 42 16 0E 00 00 00 00 0C Buffer x03510000: Len x10000 0x54 68 70 6C A2 B1 B0 3B 31 59 72 36 21 33 89 B3 0x5E 17 2B 11 1C 45 2C D1 3E BE 1B 20 D0 C7 16 45 0x88 42 C0 92 86 9C E4 F4 8E 6F 88 6E 11 AA D5 05 9:32:12 AM #129 CDR -1135 File Writer.cpp, Line 311 Write error F: PIONEER DVD-RW DVR-112 9:32:12 AM #130 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:32:13 AM #131 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:32:13 AM #132 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state F: PIONEER DVD-RW DVR-112 9:32:13 AM #133 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 9:32:13 AM #134 Text 0 File Mmc.cpp, Line 16608 start Close Session 9:32:38 AM #135 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 32x (4,800 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) --------------- Recently, I had been modifying some Registry entries to customize Windows security (I forgot which entries they were); just in case this caused the burning problem. For troubleshooting, I had tried these: - Replacing power and IDE cables connected to Pioneer DVR-112 - Cleaning the drive using a lens cleaner CD and alcohol - Uninstalling DeepBurner software - Lowering burning speed downto 16x (supposed to be 40x maximum) - Disabling antivirus software while burning I don't know what else to do. I'd be very grateful for any help. Thanks in advance, Bi
Nero 6.6.1.4 This version of Nero contains some bugs, uninstall, run this clean tool http://ww2.nero.com/nero6/en/Clean_Tools.html and then install this more stable version, BOTH packages Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe There is 3 models of your burner so go to this link and choose yours for a firmware update http://forum.rpc1.org/dl_firmware.php?download_id=2385
Hello, This is a firmware related problem. Your DVD writer is not used to newer type of DVDs. I have just solved this problem by doing this: 1. I find out exactly what kind of DVD writer I have. 2. I went to their site and downloaded the correct firmware, and the instruction. 3. I followed the instruction provided. 4. After flashing the firmware everything went back to normal and even work better than before. Good Luck! Let me know if you hve question Shahab
There are 3 models of the Pioneer DVR 112, so go here abd choose your appropriate firmware http://forum.rpc1.org/dl_result.php?kaj=1&isces
