1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero / drive fails on RW's

Discussion in 'Nero discussion' started by premb, Mar 14, 2007.

  1. premb

    premb Member

    Joined:
    Feb 2, 2006
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Hi
    I have a idvd16dd, which I use as a external using a USB case. I have used it successfully to write DVD's from this drive on DVD-R, DVD+R,

    DVD-RW.
    Just recently (without any firmware upgrade. using Version: A091 ), it started to fail on writing on any DVD media I have. I was successful in

    only 1 writes on a DVD-R, out of my last 20+ attempts. I like to use RW media but NERO will stop recognizing the drive itself when I insert a

    RW media. I have posted a log below - I compiled the whole thing and just before pressing BURN, I inserted the below listed RW media.

    Now while using this drive as external, I have a case, which I also swap to use for a 200gb internal hard drive. while reconnecting the dvd

    writer, I make sure all connections are tight.

    I also tried to update Firmware to A190- but still the same problem

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d

    Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 1 - 6.6.1.4
    Adapter driver: <USB 1.0> HA 1
    Drive buffer : 2048kB
    Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
    CD-ROM: <TOSHIBA DVD-ROM SD-R2102>Version: 1016 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK3021GAS atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-R2102 atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-R2102 D: CDRom0
    DVDRW IDE 16X E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 254MB (261104kB)
    Free physical memory: 75MB (77548kB)
    Memory in use : 70 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.1.2007
    Burn DVD Image
    7:11:52 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 39936KB of Memory

    7:11:52 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    7:11:52 PM #3 Text 0 File Writer.cpp, Line 122
    Writer DVDRW IDE 16X running

    7:11:52 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681957376
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:01.37 ( 2286112) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Documents and Settings\user\My Documents\changednamehere.nrg>

    7:11:52 PM #5 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    7:11:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    7:11:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    7:11:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: DVDRW IDE 16X, Media type: DVD-RW
    Disc Manufacturer: RITEKW - 04
    Disc Application Code: 2, Disc Physical Code: 214

    7:11:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:11:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE 16X]
    --------------------------------------------------------------

    7:11:53 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    7:11:53 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    7:11:53 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:11:53 PM #14 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    7:11:53 PM #15 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    7:11:53 PM #16 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    7:11:53 PM #17 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 2x (2,770 KB/s)

    7:11:54 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:11:54 PM #19 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    7:11:54 PM #20 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:11:54 PM #21 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: - (3)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:12:03 PM #22 Text 0 File Cdrdrv.cpp, Line 1200
    19:12:03.006 - E: DVDRW IDE 16X : Queue again later

    7:14:02 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 289
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 00 00 00 05 E0 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
    Buffer x07200000: Len x10000
    0x00 00 01 BA 44 00 56 85 5D 01 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 86 D4 FF 40 0A 38 00 2A 14
    0x00 F2 7D 40 0C 88 C2 79 00 AB E7 FF BF D1 75 E0

    7:14:02 PM #24 CDR -1135 File Writer.cpp, Line 311
    Write error
    E: DVDRW IDE 16X

    7:14:02 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:14:03 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:14:03 PM #27 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was 1503

    7:14:03 PM #28 Phase 181 File dlgbrnst.cpp, Line 1685
    Writing lead-out...

    7:14:03 PM #29 Text 0 File DVDR.cpp, Line 3136
    Estimated time for 30mm Borders: 6min 43sec

    7:14:03 PM #30 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.10 (117), size=23593 bytes, created 2/1/2002 4:15:23 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. 56delray

    56delray Regular member

    Joined:
    Feb 8, 2007
    Messages:
    659
    Likes Received:
    0
    Trophy Points:
    26
    1. You need more memory.
    .. If you can't add more, turn off everything you do not need.

    2. Nero Version: 6.6.1.4 has bugs.
    .. Read this post.

    3. File 'Drivers\CDRALW2K.SYS': Ver=5.10
    .. This is Roxio's driver. Nero doesn't play well with Roxio.
    .. Uninstall Roxio and run the zap tool found here.

    4. File 'Drivers\PXHELP20.SYS': Ver=2.03.28a
    .. This is from RecordNow. It may cause a problem.
    .. See this post.
     
  3. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Nero 6.6.1.4

    This version of Nero contains some bugs, uninstall, run this clean tool http://ww2.nero.com/nero6/en/Clean_Tools.html and then install this more stable version, BOTH packages

    Package 1:
    http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
    Package 2:
    http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe

    To explain..Not good....it is recommended to have a minimum of 512mb RAM to burn successfully, suggest you add a further 256mb.
     

Share This Page