1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero & DVD Shrink Error

Discussion in 'DVD Shrink forum' started by januscafe, Feb 7, 2005.

  1. januscafe

    januscafe Guest

    hi guys, I got the error messages like this:

    [serial number removed]

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero API version: 6.3.0.3
    Using interface version: 6.3.1.4
    Installed in: D:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A100 - HA 2 TA 0 - 6.3.0.3
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG MP0804H atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-ROM SN-124 atapi Port 1 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-ROM SN-124 E: CDRom0
    HL-DT-ST DVDRAM GSA-4120 F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 40894464 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 254MB (261104kB)
    Free physical memory: 110MB (113104kB)
    Memory in use : 56 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    31.1.2005
    NeroAPI
    5:48:06 PM #1 Phase 112 File APIProgress.cpp, Line 253
    DVD-Video files reallocation started

    5:48:06 PM #2 Phase 114 File APIProgress.cpp, Line 253
    DVD-Video files reallocation completed (no file modified)

    5:48:06 PM #3 Phase 111 File APIProgress.cpp, Line 253
    DVD-Video files sorted

    5:48:07 PM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    5:48:07 PM #5 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4120B running

    5:48:07 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    5:48:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    5:48:07 PM #8 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-At-Once, using DVD media

    5:48:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    5:48:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    5:48:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R
    Disc Manufacturer: SKC Co - .,Ltd.
    Disc Application Code: 64, Disc Physical Code: 193

    5:48:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:48:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRAM GSA-4120B]
    --------------------------------------------------------------

    5:48:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    5:48:08 PM #15 Phase 24 File APIProgress.cpp, Line 253
    Caching of files started

    5:48:08 PM #16 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    5:48:08 PM #17 Phase 25 File APIProgress.cpp, Line 253
    Caching of files completed

    5:48:08 PM #18 Phase 36 File APIProgress.cpp, Line 253
    Burn process started at 4x (5,540 KB/s)

    5:48:08 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:48:08 PM #20 Text 0 File DVDR.cpp, Line 1512
    Recording mode: Sequential Recording Mode

    5:48:08 PM #21 Text 0 File Mmc.cpp, Line 19487
    Set BUFE: supported -> ON

    5:48:08 PM #22 Text 0 File DVDR.cpp, Line 1643
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:48:08 PM #23 Text 0 File Cdrdrv.cpp, Line 7941
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:48:18 PM #24 SCSI -500 File Cdrdrv.cpp, Line 1431
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x01A10000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    5:48:18 PM #25 CDR -500 File Writer.cpp, Line 301
    SCSI command aborted
    HL-DT-ST DVDRAM GSA-4120B\H2 T0

    5:48:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    5:48:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    5:48:18 PM #28 Text 0 File DVDR.cpp, Line 1847
    EndDAO: Last written address was -1

    5:48:20 PM #29 Phase 38 File APIProgress.cpp, Line 253
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 9:02:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Can anyone pls help me to solve it?
    Thank you
     
    Last edited by a moderator: Feb 7, 2005
  2. Noqoilpi

    Noqoilpi Regular member

    Joined:
    Jan 29, 2005
    Messages:
    412
    Likes Received:
    0
    Trophy Points:
    26
    You might want to edit out your Nero serial #1A23-xxxx-xxxx-xxxx-xxxx-xxxx. Somebody may steel it. The icon at the top right of your post in the orange bar.

    Your Nero version 6.3.1.4
    Current available Nero version 6.6.0.6.
    http://www.nero.com/us/nero-up.php
     
    Last edited: Feb 7, 2005
  3. Noqoilpi

    Noqoilpi Regular member

    Joined:
    Jan 29, 2005
    Messages:
    412
    Likes Received:
    0
    Trophy Points:
    26
    I have never seen this before but it can not be good. It may be related to the following.
    Your burner is not listed here? Check your Device Manager for the secondary IDE channel for the writer, right click on Properties, select the Advanced Settings tab. Check the DMA.
    Problems will come from cheap media. I know nothing about this brand. You should run one thru DVD ID.
    http://dvd.identifier.cdfreaks.com/

    Check the firmware version on the burner. The latest is A115-2. Device Manger, select DVD/CD ROM drives, right click on Properties, select the Details tab. Look for A101,102,104, etc. A115-2 being the most up to date.
    http://forum.rpc1.org/dl_firmware.php?download_id=1841

    And last check your ASPI.
    http://www.afterdawn.com/guides/archive/aspisetup.cfm


     
    Last edited: Feb 7, 2005
  4. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    WOW!!!!!!!

    as Noqoilpi says!

    need to sort out DMA its off on one drive on on the other!

    Bus Type : via Inquiry data (1) -> ATAPI, detected: ? <<<<<<<
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG MP0804H atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-ROM SN-124 atapi Port 1 ID 0 DMA: Off <<<<<<<<

    go to device manager and enable DMA on all! may need the latest via 4in1 drivers too! are you using hyperion?
     
  5. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    14,942
    Likes Received:
    0
    Trophy Points:
    116
    @ januscafe

    Let's be sure to remove your serial number if you post any more Nero logs :)
     
  6. hursty

    hursty Active member

    Joined:
    Nov 22, 2004
    Messages:
    4,618
    Likes Received:
    1
    Trophy Points:
    66
    you can run a full system check with nero info tool
     
  7. cynthia_

    cynthia_ Regular member

    Joined:
    Sep 10, 2004
    Messages:
    312
    Likes Received:
    0
    Trophy Points:
    26
    Your basic problem is crappy media.
     
  8. sl33py

    sl33py Regular member

    Joined:
    Jan 16, 2005
    Messages:
    134
    Likes Received:
    0
    Trophy Points:
    26
    Ey Nephilim That Problem He Is Having Is Similar To The One I Was Having Remember??.. Here is the link, take a look and see what works for you.........with the help of Nephilim and a few other people i got my burner to go back to work.....with burning at 2x....good luck and nephilim thanks again homie!!


    http://forums.afterdawn.com/thread_view.cfm/154094
     
    Last edited: Feb 7, 2005

Share This Page