Hello My problem occurs after I have added my films and begin the burning process. During the Transcoding of the first film of six in the movie, with approximately 10 min left, the program just stalls out and locks up. The clock on for total time left, however continues to count. Can any one help me please? Thank you
Nero 7 "Essentials" (and other Nero OEMs) = basic garbage that Nero uses to advertise it's software with. You will usually get it with a burner purchase or it can be found on the Internet for $5-10.00. It is usually lacking certain key features to make it functional, like the DVD-Video plug-in. Without it, you cannot burn DVDs. They make many of versions of "Essentials" and the available features vary according to what the burner manufacturer opted for when he bought the software from Ahead. If you did get an "Essentials" CD, look on it's sleeve or the disc itself for any limitations the software has. You may have lucked out and gotten one with the DVD-Video plug-in and the audio codecs. Doubtful. They just want you to buy the "real" version for $79.99. This is from Nero's DVD-Video Plug-in page: Why can the plug-in only be used with Essentials? Because it was not included in the first place.
Gwendolin & Frank, I am using the Nero Essentials OEM, Nero Vision 4.5.0.26, and I have downloaded the DVD Plug in. I tried it again tonight and had the same problem, the program feezes up about 3/4 of the way through the trans coding of the frst menu item of 6 on the dvd movie I made. I am so frustated not being able burn the dvd after investing all of the time to make the movie. I would be grateful for any help of sugestions you may offer Thank you
Hi Guys I am still having a freeze up issue, please see below. any advice? How would I retrieve a log to post for your review
The info I want is the actual Nero version, not the NeroVision number...it will be something like 7.0.0.0 Log located here Program Files>Nero>Nero 7>Core>NeroHistory
The Nero version is 7.2.3.4, I've also pasted the Log below, Thanks for you help 4C87-2006-3015-E11K-055X-X6E0-0970-4026-2K9C-4678* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.3.4 Internal Version: 7, 2, 3, 4 (Nero Express) Recorder: <SONY DVD RW DRU-830A> Version: SS22 - HA 1 TA 0 - 7.2.3.4 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <SONY DVD RW DRU-830A >Version: SS22 - HA 1 TA 0 - 7.2.3.4 Adapter driver: <USB 2.0> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2040AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW242U atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-830A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 177MB (181444kB) Memory in use : 65 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.2.2007 CD-ROM (ISO) 8:57:27 PM #1 Text 0 File Isodoc.cpp, Line 6427 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:57:27 PM #2 Text 0 File Burncd.cpp, Line 3086 SONY DVD RW DRU-830A Power-Burn activated 8:57:27 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 8:57:27 PM #4 Text 0 File Reader.cpp, Line 124 Reader running 8:57:27 PM #5 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD RW DRU-830A running 8:57:27 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 8:57:27 PM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Track-At-Once, using CD-R/RW media 8:57:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 290 Last possible write address on media: 359847 ( 79:59.72) Last address to be written: 1175 ( 0:17.50) 8:57:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 302 Write in overburning mode: NO (enabled: CD) 8:57:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 2737 Recorder: SONY DVD RW DRU-830A; CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd. ATIP Data: Special Info [hex] 1: B3 00 CE, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 80 80 (invalid) 8:57:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 474 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:57:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1176 (1176) = #1176/0:15.51 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1174 blocks [D: SONY DVD RW DRU-830A] -------------------------------------------------------------- 8:57:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD RW DRU-830A] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2715648, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1176 | lead-out | 1 | 0x41 | 0x00 8:57:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127 Removed 2 run-out blocks from end of track 1. Length: 1176 -> 1174. 8:57:28 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:57:28 PM #16 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 8:57:28 PM #17 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 8:57:28 PM #18 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 8:57:28 PM #19 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 10x (1,500 KB/s) 8:57:28 PM #20 SPTI -1189 File SCSIPassThrough.cpp, Line 291 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02 Buffer x0b62c200: Len x4000 8:57:28 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:57:28 PM #22 Text 0 File MMC.cpp, Line 22040 Set BUFE: Power-Burn -> ON 8:57:37 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:57:41 PM #24 Text 0 File MMC.cpp, Line 16851 <SONY DVD RW DRU-830A > start Close Session 8:58:16 PM #25 Phase 37 File dlgbrnst.cpp, Line 1730 Burn process completed successfully at 10x (1,500 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 3:23:54 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 4C87-2006-3015-E11K-055X-X6E0-0970-4026-2K9C-4678* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.3.4 Internal Version: 7, 2, 3, 4 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.2.3.4 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <QSI CDRW/DVD SBW242U>Version: UD25 - HA 1 TA 0 - 7.2.3.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2040AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW242U atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === QSI CDRW/DVD SBW242U D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 92MB (94888kB) Memory in use : 81 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.2.2007 Super Video CD 12:00:25 AM #1 Text 0 File VCDDoc.cpp, Line 1420 VideoCD document burn settings ------------------------------------------ Compilation type : SVCD Menu : Enable Picture in separate folder : TRUE Folder name ICTURES Use CD-I : TRUE CD-I configuration : CONTROLS=ALL CURCOL=YELLOW PSDCURCOL=RED PSDCURSHAPE=ARROW CENTRTRACK=2 AUTOPLAY=AUTO_ON DUALCHAN=DUAL_ON TIMECODE_X=64 TIMECODE_Y=100 LOTID_X=64 LOTID_Y=64 ALBUM=STANDARD Encoding bitrate mode : User defined (kb/s) 12:00:25 AM #2 Phase 82 File dlgbrnst.cpp, Line 1730 Encoding video 12:00:25 AM #3 Text 0 File VCDCompilationImpl.cpp, Line 547 Using Nero Video Converter version 0.00 12:00:25 AM #4 Text 0 File AVIVCDFileItem.cpp, Line 979 Encoding C:\Documents and Settings\Todd\Desktop\NVEExport.avi to C:\DOCUME~1\Todd\LOCALS~1\Temp\NER31.tmp ScalingType: 1 Video: yes Audio: yes File size: 205298772 bytes Resolution: 720x576 25 Hz Frames: 1425 12:00:25 AM #5 Text 0 File AVIVCDFileItem.cpp, Line 992 Playing time: 57.000000 s Requested rate: 300 KB/s iVideoRate=2500501 iAudioRate=224 Estimated size: 8550 blocks 12:00:46 AM #6 Phase 40 File dlgbrnst.cpp, Line 1417 Aborted by user 12:00:47 AM #7 Text 0 File AVIVCDFileItem.cpp, Line 1024 Encoding done 12:00:47 AM #8 Text 0 File AVIVCDFileItem.cpp, Line 1088 Temporary file C:\DOCUME~1\Todd\LOCALS~1\Temp\NER31.tmp deleted 12:00:47 AM #9 Text 0 File VCDDoc.cpp, Line 2902 SVCD options: ----------------------------------------------------- Create standard compliant CD: YES Encoding resolution: NTSC Encoding bitrate mode: 0 Fit to size in min: 74 Video directory: MPEG2 ENTRIES.SVD file ID: ENTRYVCD ----------------------------------------------------- Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 3:23:54 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== 4C87-2006-3015-E11K-055X-X6E0-0970-4026-2K9C-4678* 1A4C-0800-0000-2866-9802-6074 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM NT-SPTI used Nero API version: 7.2.3.4 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 3, 4 Recorder: <SONY DVD RW DRU-830A> Version: SS22 - HA 1 TA 2 - 7.2.3.4 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2040AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW242U atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === QSI CDRW/DVD SBW242U D: CDRom0 SONY DVD RW DRU-830A E: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523496kB) Free physical memory: 74MB (75864kB) Memory in use : 85 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.3.2007 NeroAPI 10:17:16 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:17:16 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:17:16 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 10:17:16 PM #4 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-830A running 10:17:17 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:17:17 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:17:17 PM #7 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 10:17:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 290 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 140159 ( 31:08.59, 273MB) 10:17:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 302 Write in overburning mode: NO (enabled: CD) 10:17:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 2737 Recorder: SONY DVD RW DRU-830A, Media type: DVD-RW Disc Manufacturer: OPTODI - SCW004 Disc Application Code: 2, Disc Physical Code: 214 10:17:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 474 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:17:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 140160 (140160) = #140160/31:8.60 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 140160 blocks [E: SONY DVD RW DRU-830A] -------------------------------------------------------------- 10:17:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-830A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 287047680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 140160 | lead-out | 1 | 0x41 | 0x00 10:17:17 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:17:17 PM #15 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 10:17:17 PM #16 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 10:17:17 PM #17 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 10:17:17 PM #18 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 4x (5,540 KB/s) 10:17:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:17:20 PM #20 Text 0 File DVDR.cpp, Line 2877 Recording mode: Sequential Recording Mode 10:17:20 PM #21 Text 0 File DVDR.cpp, Line 3033 Start write address at LBA 0 DVD high compatibility mode: Yes 10:17:20 PM #22 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Extended Part Version: 1.2 (18) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:17:37 PM #23 Text 0 File Cdrdrv.cpp, Line 1224 22:17:37.249 - E: SONY DVD RW DRU-830A : Queue again later 10:18:36 PM #24 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-830A> start writing Lead-Out at LBA 140160 (22380h), length 0 blocks 10:18:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:18:36 PM #26 Text 0 File DVDR.cpp, Line 3273 EndDAO: Last written address was 140159 10:18:36 PM #27 Phase 181 File APIProgress.cpp, Line 278 Writing lead-out... 10:18:36 PM #28 Text 0 File DVDR.cpp, Line 3306 Estimated time for 30mm Borders: 3min 01sec 10:21:07 PM #29 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 4:23:54 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 3:02:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
Hello, this is Darren and I need help with Nero 6 light scribe. I can't find Nero for dummies so I have to check other resources.. On the edit screen I want to place a full image on the disk but it will only allow a small band of print on the disc. I can make text as large as I want but when it comes to images, that little band is all you see. If you look close you can see the rest in background but it will not allow me to place the image in the foreground instead plus I don't know what I am doing which may have mentioned earlier. Is ther any advice you can give? Thanks in advance, Darren regehr1@msn.com
This version is full of bugs, uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install this version 7.5.9.0 from here http://www.filehippo.com/download_nero_7_premium/ Update firmware to SS23 from here http://sony.storagesupport.com/dvdrw/downloads/830FWSS23/830A_SS23.zip These are not good quality discs, try Verbatim or Sony (made in Japan) Slow your burns to 4X...for DVDs and 32X for CDs.
Is the Nero download from filehippo that you advise using the full suite of products or just the burning ROM? Is this a trial release? Thanks for all of your help
Can I use the serial number from my Nero Essentials as the key for the download? Thanks again, this board has been a great coach
