Nero - extreme buffer fluctuations

wenospeak · Feb 5, 2005

Buffer Fluctuations:

I'm running Nero 6.6.0.6 on a Windows 2000 SP4 and a Sony DRU 710A burner.

I don't have any open applications running during a DVD data burn and the Buffer fluctuates from 100% to 0% several times during both the burn and the verification process.

I've tried using different media to burn the same project, the first was on a Ritek disc that failed verification, and the second burn was on a TDK disc. The TDK disc also fluctuated in the extreme both during the burn and verification process and it passed verification. However, it did not read properly when trying to locate files on the disk.

A note: This extreme buffer fluctuation began after already successfully burning three previous Ritek DVD-Data discs with no problems.

I have DMA enabled on my IDE drives (this was brought to my attention back with Nero 5.5).

I rebooted the computer, checked my BIOS, PIO, and DMA are both set to Auto.

I tried to burn the same folder onto a TDK disc after a clean restart and have the same extreme buffer fluctuations.

Any suggestions? Could it be the data in the folder I'm trying to burn? The folder contains primarily program files that were either copied from storage discs, or downloaded programs from the Internet.

I'm starting quite a collection of coasters.

Any help is appreciated.

Thanks,

wenospeak · Feb 5, 2005

I must be the only one with this problem. Either that or the answer is too obvious to bother with. Or worse, no one knows the answer.

Did a search for "buffer fluctuation" and found nothing that would help in this particular situation.

I kept the error log from the failed burn, so I guess I'll contact Nero and post back.

laddyboy · Feb 5, 2005

It is not unusual for there to be buffer fluctuations when burning disks. I often have buffers go down to near zero before replenishing. I don't think this is probably causing your bad burns.

Try slowing the burn speed down to 4X and try a different brand of media (Verbatim, TDK, Ritek, Maxell, or anything labeled "made in Japan). Better yet, buy some RW disks for testing.

The bad burns could be due to your burner not liking the media. I have a Lite-On 1633s that can't burn Fuji 8X -Rs that are readable, yet both of my NEC burners have no problem burning the same media at 8X.

Jerry746 · Feb 5, 2005

You have already checked the most common problem makers. Its usually the IDE channels set on PIO that causes the buffer under-run. Have you checked you system lately for viruses or spyware. It still looks like something running in the background using your resources. Re-boot then hit ctrl-alt-del and see what the task manager shows running.

Jerry

ScubaPete · Feb 5, 2005

A "Buffer" is your PC's shock absorber. Just as you couldn't use the family car without shocks or leaf springs your PC doesn't want hard, sharp smashes of files banging around. The buffers allow the files to be "softened".

Consider it a "good" thing. A "bad" thing is when your PC melts down. You may have noticed that with all the fluxuations nothing "bad" happened -

Say,"Thank you Mr. Buffer." and go on with life -

I kept the error log from the failed burn,
Click to expand...

Pray tell, why didn't you post it ?

Noqoilpi · Feb 5, 2005

To late.

ScubaPete · Feb 5, 2005

To late.
Click to expand...

Yea, That's what my last girlfriend said and I wound breaking my foot diving for the door . . . .

(Now THAT was a sexest remark. )

(Bad ScubaPete bad . . . .)

wenospeak · Feb 5, 2005

The error log:

Rick C
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 565MB (579200kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2005
ISO compilation
10:24:45 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:24:46 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:24:46 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

10:24:46 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:24:47 AM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

10:24:48 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2223263 (494:03.38, 4342MB)

10:24:48 AM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

10:24:48 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

10:24:48 AM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:24:48 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223264 (2223264) = #2223264/494:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223264 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

10:24:48 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4553244672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223264 | lead-out | 1 | 0x41 | 0x00

10:24:48 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:24:48 AM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

10:24:48 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:24:48 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:24:48 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:24:48 AM #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 01 38 ...RITEK...R03.8
23 54 37 09 00 3C 65 00 - A0 5F 14 14 0A 0A 0A 0A #T7..<e.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:24:48 AM #18 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:24:48 AM #19 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: DVD-ROM

10:24:48 AM #20 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

10:35:55 AM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2223264 (21ECA0h), lenght 0 blocks

10:35:55 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:36:31 AM #23 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Changing the Book Type was finished successfully, return code 0

10:36:32 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

10:36:32 AM #25 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

10:44:57 AM #26 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x40 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:02 AM #27 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x41 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:08 AM #28 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x42 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:13 AM #29 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x43 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:19 AM #30 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x44 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:24 AM #31 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x45 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:29 AM #32 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x46 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:35 AM #33 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x47 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:40 AM #34 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x48 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:45 AM #35 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x49 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:50 AM #36 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4A 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:55 AM #37 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4B 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:00 AM #38 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4C 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:06 AM #39 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4F 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:06 AM #40 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1399360 to 1399372

10:46:15 AM #41 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0xB0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:15 AM #42 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399375

10:46:25 AM #43 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5B 0x20 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:25 AM #44 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399472

10:46:42 AM #45 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0x80 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:42 AM #46 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399584

10:46:54 AM #47 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:54 AM #48 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399936

10:47:00 AM #49 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF1 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:06 AM #50 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF2 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:12 AM #51 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF3 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:25 AM #52 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:25 AM #53 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400048 to 1400051

10:47:32 AM #54 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC1 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:38 AM #55 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC2 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:45 AM #56 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC3 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:59 AM #57 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x70 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:59 AM #58 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400512 to 1400515

10:48:05 AM #59 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x71 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:11 AM #60 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x72 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:18 AM #61 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x73 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:24 AM #62 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x74 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:30 AM #63 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x75 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:36 AM #64 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x76 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:49 AM #65 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:49 AM #66 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400688 to 1400694

10:48:56 AM #67 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE1 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:01 AM #68 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE2 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:08 AM #69 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE3 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:14 AM #70 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE4 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:20 AM #71 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE5 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:27 AM #72 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE6 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:32 AM #73 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE7 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:39 AM #74 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE8 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:53 AM #75 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x60 0x20 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:53 AM #76 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400800 to 1400808

10:49:59 AM #77 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x60 0x21 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:25 AM #78 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x41 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:25 AM #79 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400864 to 1400865

10:50:31 AM #80 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x42 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:38 AM #81 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x43 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:42 AM #82 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user

10:50:44 AM #83 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x44 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

laddyboy · Feb 6, 2005

Wenospeak: Have you tried uninstalling the burner, restarting the computer twice, and then reinstalling the burner. That should reset everything. Also use [bold]RW[/bold] disks until the problem is sorted out. To verify, you are using win 2000 and not win xp, correct?

wenospeak · Feb 6, 2005

Wenospeak: Have you tried uninstalling the burner, restarting the computer twice, and then reinstalling the burner. That should reset everything. Also use RW disks until the problem is sorted out. To verify, you are using win 2000 and not win xp, correct?
Click to expand...

Are you serious? Do you mean disconnecting the burner and restarting twice, then reconnecting the burner?

Also, I don't have any DVD-RW discs only DVD-R.

Yes, I am using Windows 2000 SP5.

I certainly don't understand the theory behind it, but since it's easy enough to disconnect and reconnect, I'll try it and post back.

wenospeak · Feb 6, 2005

Well,

I uninstalled the burner from the device manager. Shut the computer down. Unplugged the drive and powered up, then restarted, and then shut down.

I plugged the drive back in. Booted the computer, it found new hardware and installed properly. I restarted the computer. Then I shut the computer down. Then booted back up, installed a blank DVD-R, waited for the drive to read it. Then opened Nero and tried a DVD-R data burn.

Same results - extreme buffer fluctuations. I aborted the burn - why wait 25 minutes for another coaster?

Don't know where that leaves me.

I'll post the info tool results and the nero log text in the next two posts - maybe someone can spot the problem.

Thanks again,

BTW - Did I mention that I had just finished burning about 250 cdr's on the same burner over the last few days (it's part of a project to get all the music files off my hard drive), and never had a buffer problem?

wenospeak · Feb 6, 2005

Info Tool Text:

Nero InfoTool 2.27

Drive Information
------------------
Drive : SONY DVD RW DRU-710A
Type : DVD±R/RW DL Recorder
Firmware Version : BYX2
Buffer Size : 2 MB
Date : ?
Serial Number : >
Vendor Specific : Nov24 ,2004
Drive Letter : D:\
Location : 0:1
Mechanism : Tray
Read Speed : 48 X
Write Speed : 48 X

Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96

Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4

Disc Information (D:\)
-------------------
Type : - no disc inserted -

Drive Information
------------------
Drive : TDK CDRW241040X
Type : CD-RW Recorder
Firmware Version : 6v36
Buffer Size : 2 MB
Date : 25-09-01
Serial Number
Vendor Specific : 25/09/01
Drive Letter : E:\
Location : 1:1
Mechanism : Tray
Read Speed : 52 , 51 , 50 , 49 , 48 , 47 , 46 , 45 , 44 , 43 , 42 , 40 , 39 , 38 , 37 , 36 , 35 , 34 , 33 , 32 , 31 , 30 , 29 , 28 , 27 , 26 , 25 , 24 , 23 , 22 , 21 , 20 , 19 , 18 , 17 , 16 , 15 , 14 , 13 , 12 , 11 , 10 , 9 , 8 , 7 , 6 , 5 , 4 , 3 , 2 , 1 X
Write Speed : 24 , 16 , 12 , 8 , 4 , 2 , 1 X

Read CD Text : No
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : No
Read DVD-RAM : No
Read DVD-R : No
Read DVD-RW : No
Read DVD+R : No
Read DVD+RW : No
Read DVD+R DL : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes

Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : No
Write DVD-RW : No
Write DVD+R : No
Write DVD+RW : No
Write DVD+R DL : No
Write DVD-RAM : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO 96

Disc Information (E:\)
-------------------
Type : - no disc inserted -

Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel

Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.00.2195.6699
Description : IDE/ATAPI Port Driver

Attached Devices
Description : Slave: SONY DVD RW DRU-710A
Type : CD-Rom Drive
DMA : On
Autorun : On

Adapter 2
---------
Description : Secondary IDE Channel

Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.00.2195.6699
Description : IDE/ATAPI Port Driver

Attached Devices
Description : Slave: TDK CDRW241040X
Type : CD-Rom Drive
DMA : On
Autorun : On

Adapter 3
---------
Description : Unknown Adapter

Driver
Description : system32\drivers\Sptrak.sys
Company : Promise Technology, Inc.
Version : 1.10 Build 41
Description : Promise SuperTrak Family Driver for WindowsNT

Attached Devices
Description : ID 0 (0): PROMISE TECH.I2O RAID D
Type : Disk Drive

Software Information
--------------------
Operating System : Windows 2000 Professional (5.00.2195 Service Pack 4)
DirectX : DirectX 9.0c

Description : Nero Burning ROM
Version : 6, 6, 0, 6
Company : Ahead Software AG
Version Check : Ok

Description : Nero StartSmart
Version : 2, 0, 0, 9
Company : Ahead Software AG

Description : NeroVision
Version : 3,0,1,27
Company : Nero AG

Description : Nero ShowTime
Version : 2, 0, 0, 18
Company : Ahead software AG

Description : Nero Recode 2
Version : 2, 2, 6, 9
Company : Ahead Software AG

Description : Cover Designer
Version : 2, 3, 0, 28
Company : Nero AG

Description : Nero BackItUp Application
Version : 1, 2, 0, 37
Company : Ahead Software AG

Hardware Information
--------------------
CPU : AMD Athlon 1400 MHz
Bus Speed : 133 MHz
Motherboard : ABIT 761-686B(KG7)
System :
BIOS : Award 6.00 PG
Memory : 1023 MB
Sound : Modem #5 Line Playback
Video : NVIDIA GeForce DDR

Driver Information
------------------
Driver : Abiosdsk
Description : n/a
Version : n/a
Company : n/a

Driver : abp480n5
Description : n/a
Version : n/a
Company : n/a

Driver : ACPI
Description : ACPI Driver for NT
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : ACPIEC
Description : ACPI Embedded Controller Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : adpu160m
Description : n/a
Version : n/a
Company : n/a

Driver : Aha154x
Description : n/a
Version : n/a
Company : n/a

Driver : aic116x
Description : n/a
Version : n/a
Company : n/a

Driver : aic78u2
Description : n/a
Version : n/a
Company : n/a

Driver : aic78xx
Description : n/a
Version : n/a
Company : n/a

Driver : ami0nt
Description : n/a
Version : n/a
Company : n/a

Driver : amsint
Description : n/a
Version : n/a
Company : n/a

Driver : asc
Description : n/a
Version : n/a
Company : n/a

Driver : asc3350p
Description : n/a
Version : n/a
Company : n/a

Driver : asc3550
Description : n/a
Version : n/a
Company : n/a

Driver : Aspi32
Description : ASPI for WIN32 Kernel Driver
Version : 4.71 (0001)
Company : Adaptec

Driver : AsyncMac
Description : MS Remote Access serial network driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : atapi
Description : IDE/ATAPI Port Driver
Version : 5.00.2195.6699
Company : Microsoft Corporation

Driver : Atdisk
Description : n/a
Version : n/a
Company : n/a

Driver : Atmarpc
Description : IP/ATM Arp Client
Version : 5.00.2166.1
Company : Microsoft Corporation

Driver : audstub
Description : AudStub Driver
Version : 5.00.2134.1
Company : Microsoft Corporation

Driver : BusLogic
Description : n/a
Version : n/a
Company : n/a

Driver : ccdecode
Description : WDM Closed Caption VBI Codec
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : cd20xrnt
Description : n/a
Version : n/a
Company : n/a

Driver : Cdaudio
Description : CD-ROM Audio Filter Driver
Version : 5.00.2135.1
Company : Microsoft Corporation

Driver : Cdfs
Description : CD-ROM File System Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Cdrom
Description : SCSI CD-ROM Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Changer
Description : n/a
Version : n/a
Company : n/a

Driver : Cpqarray
Description : n/a
Version : n/a
Company : n/a

Driver : cpqarry2
Description : n/a
Version : n/a
Company : n/a

Driver : cpqfcalm
Description : n/a
Version : n/a
Company : n/a

Driver : cpqfws2e
Description : n/a
Version : n/a
Company : n/a

Driver : dac960nt
Description : n/a
Version : n/a
Company : n/a

Driver : deckzpsx
Description : n/a
Version : n/a
Company : n/a

Driver : Defrag32
Description : Defragmentation Support Driver
Version : 4.0043
Company : Raxco Software, Inc.

Driver : Defrag32b
Description : Defragmentation Support Driver
Version : 4.0043
Company : Raxco Software, Inc.

Driver : DELTA
Description : M-Audio Delta Audio Driver (WDM)
Version : 5.10.00.5048
Company : Midiman/M-Audio

Driver : Disk
Description : PnP Disk Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : dmboot
Description : NT Disk Manager Startup Driver
Version : 2195.6655.297.3
Company : VERITAS Software Corp.

Driver : dmio
Description : NT Disk Manager I/O Driver
Version : 2195.6655.297.3
Company : VERITAS Software Corp.

Driver : dmload
Description : NT Disk Manager Startup Driver
Version : 2195.6655.297.3
Company : VERITAS Software Corp.

Driver : DMusic
Description : Microsoft DirectMusic Software Synthesizer (WDM)
Version : 5.00.2166.1
Company : Microsoft Corporation

Driver : E100B
Description : n/a
Version : n/a
Company : n/a

Driver : EFS
Description : EFS File System Filter Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Fastfat
Description : Fast FAT File System Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Fd16_700
Description : n/a
Version : n/a
Company : n/a

Driver : Fdc
Description : Floppy Disk Controller Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : fireport
Description : n/a
Version : n/a
Company : n/a

Driver : flashpnt
Description : n/a
Version : n/a
Company : n/a

Driver : Flpydisk
Description : Floppy Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Ftdisk
Description : FT Disk Driver
Version : 5.00.2195.6697
Company : Microsoft Corporation

Driver : GhPciScan
Description : n/a
Version : n/a
Company : n/a

Driver : Gpc
Description : n/a
Version : n/a
Company : n/a

Driver : HidUsb
Description : USB Miniport Driver for Input Devices
Version : 5.00.2142.1
Company : Microsoft Corporation

Driver : i8042prt
Description : i8042 Port Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : ICam7fil
Description : CS431 USBAUDIO Filter Driver
Version : 1.0.0.55
Company : Intel Corporation

Driver : Icam7USB
Description : Universal Serial Bus Camera Driver
Version : 1.0.0.55
Company : Intel Corporation

Driver : IKStream
Description : Intel® WDM Streaming Driver
Version : 2.0.0.110
Company : Intel Corporation

Driver : ini910u
Description : n/a
Version : n/a
Company : n/a

Driver : IntelIde
Description : n/a
Version : n/a
Company : n/a

Driver : IpFilterDriver
Description : n/a
Version : n/a
Company : n/a

Driver : IpInIp
Description : IP in IP Encapsulation Driver
Version : 5.00.2168.1
Company : Microsoft Corporation

Driver : IpNat
Description : IP Network Address Translator
Version : 5.00.2195.6616
Company : Microsoft Corporation

Driver : IPSEC
Description : IPSEC Driver (US/Canada Only, Not for Export)
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : ipsraidn
Description : n/a
Version : n/a
Company : n/a

Driver : IRENUM
Description : Infra-Red Bus Enumerator
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : isapnp
Description : PNP ISA Bus Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : kmixer
Description : Kernel Mode Audio Mixer
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : L8042PR2
Description : Logitech PS/2 Mouse Filter Driver.
Version : 9.79.16.0
Company : Logitech, Inc.

Driver : lbrtfdc
Description : n/a
Version : n/a
Company : n/a

Driver : LHidFlt2
Description : Logitech HID Filter Driver.
Version : 9.79.16.0
Company : Logitech, Inc.

Driver : LHidUsb
Description : Logitech USB Mouse Function Driver.
Version : 9.79.200.0
Company : Logitech, Inc.

Driver : LMouFlt2
Description : Logitech Filter Driver for Mouse Class.
Version : 9.79.16.0
Company : Logitech, Inc.

Driver : lp6nds35
Description : n/a
Version : n/a
Company : n/a

Driver : ltmodem5
Description : n/a
Version : n/a
Company : n/a

Driver : MASPINT
Description : Aspi32 Driver
Version : 1.04
Company : MicroStaff Co.,Ltd.

Driver : Modem
Description : Modem Device Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : MODEMCSA
Description : Unimodem CSA Filter
Version : 5.00.2134.1
Company : Microsoft Corporation

Driver : mouhid
Description : HID Mouse Filter Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : MPE
Description : Microsoft MPE to IP Filter
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : mraid35x
Description : n/a
Version : n/a
Company : n/a

Driver : MSKSSRV
Description : MS KS Server
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : MSPCLOCK
Description : MS Proxy Clock
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : MSPQM
Description : MS Proxy Quality Manager
Version : 5.00.2134.1
Company : Microsoft Corporation

Driver : MSTEE
Description : WDM Tee/Communication Transform Filter
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : NABTSFEC
Description : WDM NABTS/FEC VBI Codec
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : NAVAP
Description : n/a
Version : n/a
Company : n/a

Driver : NAVAPEL
Description : n/a
Version : n/a
Company : n/a

Driver : NAVENG
Description : n/a
Version : n/a
Company : n/a

Driver : NAVEX15
Description : n/a
Version : n/a
Company : n/a

Driver : Ncrc710
Description : n/a
Version : n/a
Company : n/a

Driver : NdisIP
Description : Microsoft IP Driver
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : NdisTapi
Description : NDIS 3.0 connection wrapper driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Ndisuio
Description : NDIS User mode I/O Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : NdisWan
Description : MS WAN Wrapper Network Driver (US/Canada Only, Not for Export)
Version : 5.00.2195.6699
Company : Microsoft Corporation

Driver : NetDetect
Description : n/a
Version : n/a
Company : n/a

Driver : NHostNT1
Description : NetOp Driver 1 and 2
Version : 7.60 (2003246)
Company : Danware Data A/S

Driver : NHOSTNT3
Description : NetOp Driver 3
Version : 7.60 (2003246)
Company : Danware Data A/S

Driver : NPDriver
Description : Norton Protection Driver
Version : 16.00.0.22
Company : Symantec Corporation

Driver : Npfs
Description : NPFS Driver
Version : 5.00.2147.1
Company : Microsoft Corporation

Driver : Ntfs
Description : NT File System Driver
Version : 5.00.2195.6753
Company : Microsoft Corporation

Driver : nv
Description : n/a
Version : n/a
Company : n/a

Driver : NwlnkFlt
Description : NWLINK2 Traffic Filter Driver
Version : 5.00.2134.1
Company : Microsoft Corporation

Driver : NwlnkFwd
Description : NWLINK2 Forwarder Driver
Version : 5.00.2173.1
Company : Microsoft Corporation

Driver : ohci1394
Description : 1394 OpenHCI Port Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : openhci
Description : Open Host Controller Interface USB Driver
Version : 5.00.2195.6675
Company : Microsoft Corporation

Driver : Parallel
Description : Parallel Printer Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Parport
Description : Parallel Port Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : PartMgr
Description : Partition Manager
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : ParVdm
Description : VDM Parallel Driver
Version : 5.00.2135.1
Company : Microsoft Corporation

Driver : PCI
Description : NT Plug and Play PCI Enumerator
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : PCIDump
Description : n/a
Version : n/a
Company : n/a

Driver : PCIIde
Description : Generic PCI IDE Bus Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Pcmcia
Description : PCMCIA Bus Driver
Version : 5.00.2195.6664
Company : Microsoft Corporation

Driver : PptpMiniport
Description : n/a
Version : n/a
Company : n/a

Driver : Ptilink
Description : Parallel Technologies DirectParallel IO Library
Version : 1.10
Company : Parallel Technologies, Inc.

Driver : PxHelp20
Description : Px Engine Device Driver for Windows 2000/XP
Version : 2.02.62a
Company : Sonic Solutions

Driver : QDFSDRV
Description : Norton Filter Driver
Version : 7.0.00.15
Company : Symantec Corporation

Driver : ql1080
Description : n/a
Version : n/a
Company : n/a

Driver : Ql10wnt
Description : n/a
Version : n/a
Company : n/a

Driver : ql1240
Description : n/a
Version : n/a
Company : n/a

Driver : ql2100
Description : n/a
Version : n/a
Company : n/a

Driver : Rasl2tp
Description : RAS L2TP mini-port/call-manager driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Raspti
Description : PTI DirectParallel(R) mini-port/call-manager driver
Version : 5.00.2146.1
Company : Microsoft Corporation

Driver : RCA
Description : RCA filter
Version : 5.00.2164.1
Company : Microsoft Corporation

Driver : Rdbss
Description : Redirected Drive Buffering SubSystem Driver
Version : 5.00.2195.6988
Company : Microsoft Corporation

Driver : redbook
Description : Redbook Audio Filter Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : serenum
Description : Serial Port Enumerator
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Serial
Description : Serial Device Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Sfloppy
Description : SCSI Floppy Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : sglfb
Description : n/a
Version : n/a
Company : n/a

Driver : Simbad
Description : n/a
Version : n/a
Company : n/a

Driver : SLIP
Description : Microsoft Slip Deframing Filter Minidriver
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : Sparrow
Description : n/a
Version : n/a
Company : n/a

Driver : Sptrak
Description : Promise SuperTrak Family Driver for WindowsNT
Version : 1.10 Build 41
Company : Promise Technology, Inc.

Driver : Srv
Description : Server driver
Version : 5.00.2195.6699
Company : Microsoft Corporation

Driver : streamip
Description : Microsoft IP Driver
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : swenum
Description : Plug and Play Software Device Enumerator
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : swmidi
Description : Microsoft GS Wavetable Synthesizer
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : symc810
Description : n/a
Version : n/a
Company : n/a

Driver : symc8xx
Description : n/a
Version : n/a
Company : n/a

Driver : SYMDNS
Description : DNS Filter Driver
Version : 5.4.4.17
Company : Symantec Corporation

Driver : SymEvent
Description : Symantec Event Library
Version : 11.3.0.17
Company : Symantec Corporation

Driver : SYMFW
Description : Firewall Filter Driver
Version : 5.4.4.17
Company : Symantec Corporation

Driver : SYMIDS
Description : IDS Filter Driver
Version : 5.4.4.17
Company : Symantec Corporation

Driver : SYMIDSCO
Description : IDS Core Driver
Version : 5.3.2.71
Company : Symantec Corporation

Driver : symlcbrd
Description : n/a
Version : n/a
Company : n/a

Driver : SYMNDIS
Description : NDIS Filter Driver
Version : 5.4.4.17
Company : Symantec Corporation

Driver : SYMREDRV
Description : Redirector Filter Driver
Version : 5.4.4.17
Company : Symantec Corporation

Driver : SYMTDI
Description : Network Dispatch Driver
Version : 5.4.4.17
Company : Symantec Corporation

Driver : sym_hi
Description : n/a
Version : n/a
Company : n/a

Driver : sysaudio
Description : System Audio WDM Filter
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : Tcpip
Description : TCP/IP driver
Version : 5.00.2195.6706
Company : Microsoft Corporation

Driver : tga
Description : n/a
Version : n/a
Company : n/a

Driver : Udfs
Description : UDF File System Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : uhcd
Description : Universal Host Controller Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : ultra66
Description : n/a
Version : n/a
Company : n/a

Driver : Update
Description : Update Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : usbaudio
Description : USB Audio Driver
Version : 5.00.2150.1
Company : Microsoft Corporation

Driver : usbehci
Description : EHCI eUSB Miniport Driver
Version : 5.00.2195.6709
Company : Microsoft Corporation

Driver : usbhub
Description : Default Hub Driver for USB
Version : 5.00.2195.6689
Company : Microsoft Corporation

Driver : usbhub20
Description : Default Hub Driver for USB 2.0
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : usbprint
Description : USB Printer driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : usbscan
Description : USB Scanner Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : USBSTOR
Description : USB Mass Storage Class Driver
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : VgaSave
Description : n/a
Version : n/a
Company : n/a

Driver : Wanarp
Description : MS Remote Access and Routing ARP Driver
Version : 5.00.2195.6601
Company : Microsoft Corporation

Driver : wdmaud
Description : MMSYSTEM Wave/Midi API mapper
Version : 5.00.2195.6655
Company : Microsoft Corporation

Driver : WDM_INAEC
Description : n/a
Version : n/a
Company : n/a

Driver : WSTCODEC
Description : WDM WST Codec Driver
Version : 5.3.0000000.900 built by: DIRECTX
Company : Microsoft Corporation

Driver : msvcrt.dll
Version : 6.10.9844.0

Driver : msvcirt.dll
Version : 6.10.8637.0

Driver : mfc42.dll
Version : 6.00.9586.0

Driver : msvcp60.dll
Version : 6.00.8972.0

Driver : msvcp70.dll
Version : 7.00.9466.0

Driver : msvcr70.dll
Version : 7.00.9466.0

Driver : OLE32.DLL
Version : 5.00.2195.6906

Driver : OLEPRO32.DLL
Version : 5.0.4522

Driver : oledlg.dll
Version : 1.0

Driver : ADVAPI32.DLL
Version : 5.00.2195.6876

Driver : comctl32.dll
Version : 5.81

Driver : SETUPAPI.DLL
Version : 5.00.2195.6622

Lower Filters
-------------
Driver : PxHelp20
Description : Px Engine Device Driver for Windows 2000/XP
Version : 2.02.62a
Company : Sonic Solutions

Upper Filters
-------------
Video Codecs
------------
Cinepak Codec by Radius : 1.10.0.6
Intel Indeo(R) Video R3.2
Intel Indeo(R) Video R3.2
Microsoft RLE : 5.00.2195.6612
Microsoft Video 1 : 5.00.2134.1
Microsoft H.263 Video Codec : 4.4.3385
Microsoft H.261 Video Codec : 4.4.3385
Intel 4|2|0 Video V2.50 : 4.4.3385
Indeo® video 5.10 : R.5.10.15.2.55
Microsoft YUV : 5.3.0000000.900 built by: DIRECTX
Microsoft YUV : 5.3.0000000.900 built by: DIRECTX
Microsoft YUV : 5.3.0000000.900 built by: DIRECTX
: V2.00.00.00
Toshiba YUV Codec : 1.0.5
Intel I.263 Video Driver 2.55.016 : V2.55.016
Intel Indeo® Video 4.5 : 4.51.16.03
DivX® 5.2.1 Codec : 5.2.1.1328
XviD MPEG-4 Codec : n/a

Audio Codecs
------------
Microsoft IMA ADPCM CODEC : 4.00.0.0
Microsoft ADPCM CODEC : 4.00.0.0
Microsoft CCITT G.711 A-Law and u-Law CODEC : 4.00.0.0
Microsoft GSM 6.10 Audio CODEC : 4.00.0.0
DSP Group TrueSpeech(TM) Software CODEC : 1.00.0.0
Lernout & Hauspie CODECs : 1.00.0.1
Microsoft G.723.1 CODEC : 1.02.0.1
Indeo® audio software : 2.05.0.53
Windows Media Audio : 4.02.0.0
Fraunhofer IIS MPEG Layer-3 Codec (advanced) : 1.09.1.49
Intel G.723.1 CODEC : 1.02.0.5
Microsoft PCM Converter : 5.00.0.0

ASPI Information
----------------
System ASPI : ASPI is installed and working properly

WNASPI32.DLL : 4.71 (0001) 45056 bytes May 06, 2002
ASPI32.SYS : 4.71 (0001) 17005 bytes May 06, 2002
WINASPI.DLL : 4.60 (1021) 5600 bytes April 19, 2001
WOWPOST.EXE : 4.60 (1021) 4672 bytes April 19, 2001

Nero ASPI : ASPI is installed and working properly

WNASPI32.DLL : 2.0.1.74 164112 bytes October 26, 2004

Installed OS Patches
--------------------
(Q284837) 1394 Audio/Video Control Device Stops Working Unexpectedly : Yes
(Q319973) USB 2.0 Support : Yes
(Q290089) Computer hangs After you connect Multiple IEEE 1394 devices : No
(Q328120) IEEE 1394 device may disappear when you add new daisy-Chain devices : Yes
(Q813908) SCSI Pass-Through Mode Sense Command May Crash the Computer : Yes
(Q322804) Cannot Use Windows Media Player to Read XA Data on 1394 CD-ROM Devices : Yes
(Q322823) Windows Explorer Does Not Detect That the CD-ROM That Was Previously in the CD Drive Has Been Replaced with a Blank CD-R : Yes
(Q281672) Possible Data Loss After You Enable the 'Write Cache Enabled' Feature : Yes
(Q327081) Data Added to Removable Media During Hibernation May Be Lost When You Resume Windows 2000 : Yes
(Q332023) Slow Disk Performance When Write Caching Is Enabled : Yes
(Q818194) USB - You Receive a 'KMODE_EXCEPTION_NOT_HANDLED' Error Message : Yes
(Q276409) Hotfix from Q259545 causes 'Stop 0x0000000A' Error Message in Disk.sys File : Yes
(Q260055) OHCI1394 Driver May Cause a Memory Leak During Asynchronous Write Operation : Yes
(Q262814) IEEE 1394 OHCI Driver Does Not Retry Busy Devices Properly : Yes
(Q272155) Connectivity Problems Using VIA 1394 PCI Host Controllers : Yes
(Q284837) 1394 Audio/Video Control Device Stops Working Unexpectedly : Yes
(Q260233) Support for ATA 100 (Mode 5) in Windows 2000 : No
(Q312190) A National Semiconductor IDE Controller May Not Function Correctly : Yes
(Q310051) Windows 2000 Does Not Recognize a Digital Video Camera or Other 1394 OHCI Devices When Connected : Yes
(Q814017) Windows Does Not Detect a SCSI Device After a Surprise Removal : Yes
(Q816765) The Scsiport Driver May Not Read Registry Parameters That Are Specified for Miniport Drivers : Yes
(Q290321) 'Stop 0x00000050' Error Message When You View Files on a DVD : Yes
(Q313663) Udfs.sys Has a 2.2 Gigabyte Limitation with DVD-R Media : Yes
(Q277877) USB Devices May Take More Than 30 Seconds to Wake Up After Hibernating : Yes
(Q283787) Multifunction USB Device Cannot Transfer 4 KB or Larger Files : Yes
(Q313600) An Error Occurs in Usbhub.sys if it Is Used as a Composite Driver : Yes
(Q810090) USB Update : Yes
(Q329112) Multi-Border DVD with More Than 4 GB of Data Not Readable Past First Border : Yes
(Q812415) Problems with Multiple ATA devices : No
(Q322359) Intelide.sys Is Not Used on Computers with ICH4 or ICH5 : No

wenospeak · Feb 6, 2005

Nero History Log Text:

Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 577MB (591796kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.2.2005
Audio CD
9:17:42 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 08:31.08, Pause frames: 150, Filters: 0, Name: ' - Live At Jazzclub Fashing (02-April-2002) - 08.mp3'.
Track 02: Length: 07:39.66, Pause frames: 000, Filters: 0, Name: ' - Live At Jazzclub Fashing (02-April-2002) - 09.mp3'.
Track 03: Length: 09:26.68, Pause frames: 000, Filters: 0, Name: ' - Live At Jazzclub Fashing (02-April-2002) - 10.mp3'.
Track 04: Length: 07:14.74, Pause frames: 000, Filters: 0, Name: ' - Live At Jazzclub Fashing (02-April-2002) - 11.mp3'.
Track 05: Length: 06:04.20, Pause frames: 000, Filters: 0, Name: '- Live At Jazzclub Fashing (02-April-2002) - 12.mp3'.
Total size: 38:57.11

9:17:42 PM #2 Text 0 File Burncd.cpp, Line 2870
SONY DVD RW DRU-710A
Power-Burn activated

9:17:42 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

9:17:42 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

9:17:42 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:17:42 PM #6 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using CD-R/RW media

9:17:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 175285 ( 38:59.10)

9:17:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

9:17:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:17:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:17:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE ( - Live At Jazzclub Fashing (02-April-2002) - 08.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 38333 (38333) = #38333/8:31.8
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 38333 blocks [SONY DVD RW DRU-710A]
1: TRM_AUDIO_NOPRE ( - Live At Jazzclub Fashing (02-April-2002) - 09.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 34491 (34491) = #34491/7:39.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 34491 blocks [SONY DVD RW DRU-710A]
2: TRM_AUDIO_NOPRE ( - Live At Jazzclub Fashing (02-April-2002) - 10.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 42518 (42518) = #42518/9:26.68
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 42518 blocks [SONY DVD RW DRU-710A]
3: TRM_AUDIO_NOPRE ( - Live At Jazzclub Fashing (02-April-2002) - 11.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 32624 (32624) = #32624/7:14.74
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 32624 blocks [SONY DVD RW DRU-710A]
4: TRM_AUDIO_NOPRE (- Live At Jazzclub Fashing (02-April-2002) - 12.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 27320 (27320) = #27320/6:4.20
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 27320 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

9:17:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 94206384, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 94206384 94206384 178640352, ISRC ""
3: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 178640352 178640352 282724416, ISRC ""
4: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 282724416 282724416 362587968, ISRC ""
5: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 362587968 362587968 429467328, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
38333 | 2 | 0 | 0x21 | 0x00
38333 | 2 | 1 | 0x21 | 0x00
72824 | 3 | 0 | 0x21 | 0x00
72824 | 3 | 1 | 0x21 | 0x00
115342 | 4 | 0 | 0x21 | 0x00
115342 | 4 | 1 | 0x21 | 0x00
147966 | 5 | 0 | 0x21 | 0x00
147966 | 5 | 1 | 0x21 | 0x00
175286 | lead-out | 1 | 0x01 | 0x00

9:17:43 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)

9:17:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:17:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #38333

9:17:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #72824

9:17:43 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #115342

9:17:43 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #147966

9:17:43 PM #19 Text 0 File Mmc.cpp, Line 16325
StartDAO : CD-Text - On

9:17:43 PM #20 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

9:19:38 PM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 175286 (2ACB6h), lenght 6750 blocks

9:19:41 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:19:47 PM #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 40x (6,000 KB/s)

9:19:48 PM #24 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:19:48 PM #25 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 575MB (589168kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.2.2005
Audio CD
9:21:23 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 05:12.31, Pause frames: 150, Filters: 0, Name: '01 - Imagine This.Mp3'.
Track 02: Length: 04:31.05, Pause frames: 150, Filters: 0, Name: '02 - Yinin' & Yangin' (instrumental).Mp3'.
Track 03: Length: 04:03.50, Pause frames: 150, Filters: 0, Name: '03 - Hip Bop.Mp3'.
Track 04: Length: 05:20.54, Pause frames: 150, Filters: 0, Name: '04 - Joe's Journey.Mp3'.
Track 05: Length: 02:43.10, Pause frames: 150, Filters: 0, Name: '05 - The Urban Turban.Mp3'.
Track 06: Length: 05:18.14, Pause frames: 150, Filters: 0, Name: '06 - Tali Lama.Mp3'.
Track 07: Length: 06:47.50, Pause frames: 150, Filters: 0, Name: '07 - Zenergy.Mp3'.
Track 08: Length: 02:59.05, Pause frames: 150, Filters: 0, Name: '08 - Kaila Speaks.Mp3'.
Track 09: Length: 03:47.19, Pause frames: 150, Filters: 0, Name: '09 - Sacred Place.Mp3'.
Track 10: Length: 04:56.48, Pause frames: 150, Filters: 0, Name: '10 - Resolution.Mp3'.
Total size: 45:59.61

9:21:23 PM #2 Text 0 File Burncd.cpp, Line 2870
SONY DVD RW DRU-710A
Power-Burn activated

9:21:23 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

9:21:23 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

9:21:23 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:21:23 PM #6 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using CD-R/RW media

9:21:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 206835 ( 45:59.60)

9:21:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

9:21:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:21:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:21:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01 - Imagine This.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 23431 (23431) = #23431/5:12.31
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 23431 blocks [SONY DVD RW DRU-710A]
1: TRM_AUDIO_NOPRE (02 - Yinin' & Yangin' (instrumental).Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 20330 (20330) = #20330/4:31.5
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 20330 blocks [SONY DVD RW DRU-710A]
2: TRM_AUDIO_NOPRE (03 - Hip Bop.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 18275 (18275) = #18275/4:3.50
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 18275 blocks [SONY DVD RW DRU-710A]
3: TRM_AUDIO_NOPRE (04 - Joe's Journey.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 24054 (24054) = #24054/5:20.54
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 24054 blocks [SONY DVD RW DRU-710A]
4: TRM_AUDIO_NOPRE (05 - The Urban Turban.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 12235 (12235) = #12235/2:43.10
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 12235 blocks [SONY DVD RW DRU-710A]
5: TRM_AUDIO_NOPRE (06 - Tali Lama.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 23864 (23864) = #23864/5:18.14
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 23864 blocks [SONY DVD RW DRU-710A]
6: TRM_AUDIO_NOPRE (07 - Zenergy.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 30575 (30575) = #30575/6:47.50
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 30575 blocks [SONY DVD RW DRU-710A]
7: TRM_AUDIO_NOPRE (08 - Kaila Speaks.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 13430 (13430) = #13430/2:59.5
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 13430 blocks [SONY DVD RW DRU-710A]
8: TRM_AUDIO_NOPRE (09 - Sacred Place.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 17044 (17044) = #17044/3:47.19
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 17044 blocks [SONY DVD RW DRU-710A]
9: TRM_AUDIO_NOPRE (10 - Resolution.Mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 22248 (22248) = #22248/4:56.48
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 22248 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

9:21:23 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 10:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 57726288, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 57726288 58093488 107861328, ISRC ""
3: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 107861328 108228528 152965728, ISRC ""
4: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 152965728 153332928 212217120, ISRC ""
5: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 212217120 212584320 242535600, ISRC ""
6: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 242535600 242902800 301321872, ISRC ""
7: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 301321872 301689072 376536672, ISRC ""
8: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 376536672 376903872 409780512, ISRC ""
9: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 409780512 410147712 451871424, ISRC ""
10: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 451871424 452238624 506701728, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
23431 | 2 | 0 | 0x21 | 0x00
23581 | 2 | 1 | 0x21 | 0x00
43911 | 3 | 0 | 0x21 | 0x00
44061 | 3 | 1 | 0x21 | 0x00
62336 | 4 | 0 | 0x21 | 0x00
62486 | 4 | 1 | 0x21 | 0x00
86540 | 5 | 0 | 0x21 | 0x00
86690 | 5 | 1 | 0x21 | 0x00
98925 | 6 | 0 | 0x21 | 0x00
99075 | 6 | 1 | 0x21 | 0x00
122939 | 7 | 0 | 0x21 | 0x00
123089 | 7 | 1 | 0x21 | 0x00
153664 | 8 | 0 | 0x21 | 0x00
153814 | 8 | 1 | 0x21 | 0x00
167244 | 9 | 0 | 0x21 | 0x00
167394 | 9 | 1 | 0x21 | 0x00
184438 | 10 | 0 | 0x21 | 0x00
184588 | 10 | 1 | 0x21 | 0x00
206836 | lead-out | 1 | 0x01 | 0x00

9:21:23 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)

9:21:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:21:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #23581

9:21:23 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #44061

9:21:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #62486

9:21:23 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #86690

9:21:23 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #99075

9:21:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #123089

9:21:23 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #153814

9:21:23 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #167394

9:21:23 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #184588

9:21:23 PM #24 Text 0 File Mmc.cpp, Line 16325
StartDAO : CD-Text - On

9:21:23 PM #25 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

9:23:32 PM #26 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 206836 (327F4h), lenght 6750 blocks

9:23:34 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:23:41 PM #28 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 40x (6,000 KB/s)

9:23:42 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:23:42 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 574MB (588660kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.2.2005
Audio CD
9:25:15 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 46:30.63, Pause frames: 150, Filters: 0, Name: '¬#WEATHER REPORT 'Barcelona, 26·May·83' part 1.mp3'.
Track 02: Length: 20:48.74, Pause frames: 000, Filters: 0, Name: '¬#WEATHER REPORT 'Barcelona, 26·May·83' part 2.mp3'.
Total size: 67:19.62

9:25:15 PM #2 Text 0 File Burncd.cpp, Line 2870
SONY DVD RW DRU-710A
Power-Burn activated

9:25:15 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

9:25:15 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

9:25:15 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:25:15 PM #6 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using CD-R/RW media

9:25:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 302986 ( 67:21.61)

9:25:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

9:25:16 PM #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:25:16 PM #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:25:16 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (¬#WEATHER REPORT 'Barcelona, 26·May·83' part 1.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 209313 (209313) = #209313/46:30.63
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 209313 blocks [SONY DVD RW DRU-710A]
1: TRM_AUDIO_NOPRE (¬#WEATHER REPORT 'Barcelona, 26·May·83' part 2.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 93674 (93674) = #93674/20:48.74
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 93674 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

9:25:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 512765424, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 512765424 512765424 742079376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
209313 | 2 | 0 | 0x21 | 0x00
209313 | 2 | 1 | 0x21 | 0x00
302987 | lead-out | 1 | 0x01 | 0x00

9:25:16 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)

9:25:16 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:25:16 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #209313

9:25:16 PM #16 Text 0 File Mmc.cpp, Line 16325
StartDAO : CD-Text - On

9:25:16 PM #17 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

9:28:00 PM #18 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 302987 (49F8Bh), lenght 6750 blocks

9:28:02 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:28:08 PM #20 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 40x (6,000 KB/s)

9:28:09 PM #21 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:28:09 PM #22 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <SONY DVD RW DRU-710A> Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BY03 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 574MB (588196kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.2.2005
Audio CD
9:29:27 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 06:39.42, Pause frames: 150, Filters: 0, Name: '01 To Whom It May Concern - Us.mp3'.
Track 02: Length: 11:56.67, Pause frames: 000, Filters: 0, Name: '02 Emergency.mp3'.
Track 03: Length: 06:18.69, Pause frames: 000, Filters: 0, Name: '03 Vuelta Abajo.mp3'.
Track 04: Length: 06:41.33, Pause frames: 000, Filters: 0, Name: '04 A Famous Blues.mp3'.
Track 05: Length: 05:15.24, Pause frames: 000, Filters: 0, Name: '05 Something Special.mp3'.
Total size: 36:52.10

9:29:27 PM #2 Text 0 File Burncd.cpp, Line 2870
SONY DVD RW DRU-710A
Power-Burn activated

9:29:27 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

9:29:27 PM #4 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

9:29:27 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

9:29:27 PM #6 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using CD-R/RW media

9:29:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 165909 ( 36:54.09)

9:29:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

9:29:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:29:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:29:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01 To Whom It May Concern - Us.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 29967 (29967) = #29967/6:39.42
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 29967 blocks [SONY DVD RW DRU-710A]
1: TRM_AUDIO_NOPRE (02 Emergency.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 53767 (53767) = #53767/11:56.67
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 53767 blocks [SONY DVD RW DRU-710A]
2: TRM_AUDIO_NOPRE (03 Vuelta Abajo.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 28419 (28419) = #28419/6:18.69
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 28419 blocks [SONY DVD RW DRU-710A]
3: TRM_AUDIO_NOPRE (04 A Famous Blues.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 30108 (30108) = #30108/6:41.33
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 30108 blocks [SONY DVD RW DRU-710A]
4: TRM_AUDIO_NOPRE (05 Something Special.mp3)
2 indices, index0 (0) not provided
original disc pos #0 + 23649 (23649) = #23649/5:15.24
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 23649 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

9:29:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 73726416, ISRC ""
2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 73726416 73726416 205348032, ISRC ""
3: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 205348032 205348032 274917744, ISRC ""
4: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 274917744 274917744 348622128, ISRC ""
5: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 348622128 348622128 406514880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
29967 | 2 | 0 | 0x21 | 0x00
29967 | 2 | 1 | 0x21 | 0x00
83734 | 3 | 0 | 0x21 | 0x00
83734 | 3 | 1 | 0x21 | 0x00
112153 | 4 | 0 | 0x21 | 0x00
112153 | 4 | 1 | 0x21 | 0x00
142261 | 5 | 0 | 0x21 | 0x00
142261 | 5 | 1 | 0x21 | 0x00
165910 | lead-out | 1 | 0x01 | 0x00

9:29:28 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)

9:29:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:29:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #29967

9:29:28 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #83734

9:29:28 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #112153

9:29:28 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #142261

9:29:28 PM #19 Text 0 File Mmc.cpp, Line 16325
StartDAO : CD-Text - On

9:29:28 PM #20 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

9:31:20 PM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 165910 (28816h), lenght 6750 blocks

9:31:23 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:31:29 PM #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 40x (6,000 KB/s)

9:31:30 PM #24 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

9:31:30 PM #25 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 505MB (518124kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2005
ISO compilation
8:44:02 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:44:07 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

8:44:07 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

8:44:07 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

8:44:19 AM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

8:44:20 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1792143 (398:15.18, 3500MB)

8:44:20 AM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

8:44:20 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

8:44:20 AM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:44:20 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1792144 (1792144) = #1792144/398:15.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1792144 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

8:44:20 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3670310912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1792144 | lead-out | 1 | 0x41 | 0x00

8:44:20 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:44:20 AM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

8:44:20 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:44:20 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

8:44:20 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:44:20 AM #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 01 38 ...RITEK...R03.8
23 54 37 09 00 3C 65 00 - A0 5F 14 14 0A 0A 0A 0A #T7..<e.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

8:44:20 AM #18 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

8:44:20 AM #19 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: DVD-ROM

8:44:20 AM #20 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

9:03:21 AM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 1792144 (1B5890h), lenght 0 blocks

9:03:21 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:03:50 AM #23 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Changing the Book Type was finished successfully, return code 0

9:03:50 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

9:03:50 AM #25 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

9:20:43 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:20:43 AM #27 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 587MB (601380kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2005
ISO compilation
10:00:48 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:00:48 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:00:48 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

10:00:48 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:00:49 AM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

10:00:49 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2091055 (464:40.55, 4084MB)

10:00:49 AM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

10:00:49 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

10:00:49 AM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:00:49 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2091056 (2091056) = #2091056/464:40.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091056 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

10:00:49 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4282482688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2091056 | lead-out | 1 | 0x41 | 0x00

10:00:49 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:00:49 AM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

10:00:49 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:00:49 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:00:49 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:00:49 AM #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 01 38 ...RITEK...R03.8
23 54 37 09 00 3C 65 00 - A0 5F 14 14 0A 0A 0A 0A #T7..<e.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:00:49 AM #18 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:00:49 AM #19 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: DVD-ROM

10:00:49 AM #20 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

10:08:45 AM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2091056 (1FE830h), lenght 0 blocks

10:08:45 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:09:15 AM #23 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Changing the Book Type was finished successfully, return code 0

10:09:15 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

10:09:15 AM #25 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

10:18:46 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:18:46 AM #27 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 567MB (580756kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2005
ISO compilation
10:24:45 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:24:46 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:24:46 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

10:24:46 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:24:47 AM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

10:24:48 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2223263 (494:03.38, 4342MB)

10:24:48 AM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

10:24:48 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

10:24:48 AM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:24:48 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223264 (2223264) = #2223264/494:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223264 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

10:24:48 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4553244672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223264 | lead-out | 1 | 0x41 | 0x00

10:24:48 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:24:48 AM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

10:24:48 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:24:48 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:24:48 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:24:48 AM #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 01 38 ...RITEK...R03.8
23 54 37 09 00 3C 65 00 - A0 5F 14 14 0A 0A 0A 0A #T7..<e.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:24:48 AM #18 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:24:48 AM #19 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: DVD-ROM

10:24:48 AM #20 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

10:35:55 AM #21 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2223264 (21ECA0h), lenght 0 blocks

10:35:55 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:36:31 AM #23 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Changing the Book Type was finished successfully, return code 0

10:36:32 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

10:36:32 AM #25 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

10:44:57 AM #26 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x40 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:02 AM #27 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x41 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:08 AM #28 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x42 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:13 AM #29 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x43 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:19 AM #30 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_

wenospeak · Feb 6, 2005

The Rest OF The Nero History Log:

10:45:13 AM #29 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x43 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:19 AM #30 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x44 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:24 AM #31 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x45 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:29 AM #32 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x46 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:35 AM #33 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x47 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:40 AM #34 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x48 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:45 AM #35 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x49 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:50 AM #36 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4A 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:45:55 AM #37 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4B 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:00 AM #38 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4C 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:06 AM #39 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0x4F 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:06 AM #40 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1399360 to 1399372

10:46:15 AM #41 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5A 0xB0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:15 AM #42 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399375

10:46:25 AM #43 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5B 0x20 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:25 AM #44 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399472

10:46:42 AM #45 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0x80 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:42 AM #46 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399584

10:46:54 AM #47 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:46:54 AM #48 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 1399936

10:47:00 AM #49 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF1 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:06 AM #50 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF2 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:12 AM #51 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5C 0xF3 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:25 AM #52 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:25 AM #53 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400048 to 1400051

10:47:32 AM #54 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC1 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:38 AM #55 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC2 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:45 AM #56 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5E 0xC3 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:59 AM #57 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x70 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:47:59 AM #58 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400512 to 1400515

10:48:05 AM #59 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x71 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:11 AM #60 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x72 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:18 AM #61 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x73 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:24 AM #62 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x74 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:30 AM #63 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x75 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:36 AM #64 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0x76 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:49 AM #65 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE0 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:48:49 AM #66 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400688 to 1400694

10:48:56 AM #67 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE1 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:01 AM #68 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE2 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:08 AM #69 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE3 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:14 AM #70 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE4 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:20 AM #71 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE5 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:27 AM #72 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE6 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:32 AM #73 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE7 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:39 AM #74 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x5F 0xE8 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:53 AM #75 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x60 0x20 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:49:53 AM #76 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400800 to 1400808

10:49:59 AM #77 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x60 0x21 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:25 AM #78 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x41 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:25 AM #79 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1400864 to 1400865

10:50:31 AM #80 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x42 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:38 AM #81 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x43 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

10:50:42 AM #82 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user

10:50:44 AM #83 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0C371200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x15 0x61 0x44 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 568MB (582564kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2005
ISO compilation
10:52:36 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:52:36 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:52:36 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

10:52:36 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:52:38 AM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

10:52:38 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2223263 (494:03.38, 4342MB)

10:52:38 AM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

10:52:38 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

10:52:38 AM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:52:38 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223264 (2223264) = #2223264/494:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223264 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

10:52:38 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4553244672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223264 | lead-out | 1 | 0x41 | 0x00

10:52:38 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:52:38 AM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

10:52:38 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:52:38 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:52:38 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:52:39 AM #17 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode

10:52:39 AM #18 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

10:52:39 AM #19 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

10:52:39 AM #20 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:52:39 AM #21 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Book Type setting not supported for the loaded disc type

10:53:29 AM #22 Text 0 File Cdrdrv.cpp, Line 1284
10:53:29.436 - SONY DVD RW DRU-710A\H0 T1 : Queue again later

11:04:11 AM #23 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2223264 (21ECA0h), lenght 0 blocks

11:04:11 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:04:11 AM #25 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 2223263

11:04:39 AM #26 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Book Type setting not supported for the loaded disc type

11:04:39 AM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

11:04:39 AM #28 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

11:16:07 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:16:07 AM #30 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 555MB (568984kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2005
ISO compilation
12:54:48 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:54:49 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

12:54:49 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

12:54:49 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

12:54:51 PM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

12:54:51 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2223263 (494:03.38, 4342MB)

12:54:51 PM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

12:54:51 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

12:54:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:54:51 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223264 (2223264) = #2223264/494:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223264 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

12:54:51 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4553244672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223264 | lead-out | 1 | 0x41 | 0x00

12:54:51 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:54:51 PM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

12:54:51 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:54:51 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

12:54:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:54:51 PM #17 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode

12:54:51 PM #18 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

12:54:51 PM #19 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

12:54:51 PM #20 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:54:51 PM #21 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Book Type setting not supported for the loaded disc type

12:55:41 PM #22 Text 0 File Cdrdrv.cpp, Line 1284
12:55:41.903 - SONY DVD RW DRU-710A\H0 T1 : Queue again later

1:07:02 PM #23 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2223264 (21ECA0h), lenght 0 blocks

1:07:02 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:07:02 PM #25 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 2223263

1:07:30 PM #26 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Book Type setting not supported for the loaded disc type

1:07:30 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

1:07:30 PM #28 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

1:18:55 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:18:55 PM #30 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 568MB (581712kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2005
ISO compilation
10:55:41 AM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:55:42 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:55:42 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

10:55:42 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

10:55:43 AM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

10:55:44 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2223263 (494:03.38, 4342MB)

10:55:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

10:55:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

10:55:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:55:44 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223264 (2223264) = #2223264/494:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223264 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

10:55:44 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4553244672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223264 | lead-out | 1 | 0x41 | 0x00

10:55:44 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:55:44 AM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

10:55:44 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:55:44 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:55:44 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:55:44 AM #17 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 01 38 ...RITEK...R03.8
23 54 37 09 00 3C 65 00 - A0 5F 14 14 0A 0A 0A 0A #T7..<e.._......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:55:44 AM #18 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:55:44 AM #19 CDR -1207 File DVDR.cpp, Line 4805
Book Type automatically set to: DVD-ROM

10:55:44 AM #20 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: Yes

10:57:51 AM #21 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user

10:58:16 AM #22 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Changing the Book Type was finished successfully, return code 0

10:58:16 AM #23 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

laddyboy · Feb 6, 2005

Wenospeak: I had only meant to do a device manager uninstall but a physical uninstall works as well. Sometimes the os and pio and dma communication channels get screwed up and uninstalling the device resets everything.

Have you tried to burn any other dvd compilations since these problems started? You might try uninstalling Nero. Use the Nero Clean Tool (see dl site below), and then reinstall Nero. It doesn't take long. I don't know where you live, but I think it would be worth a trip to the store to buy a RW disk to keep from making a stack of coasters.

http://www.nero.com/en/Clean_Tools.html

Noqoilpi · Feb 6, 2005

Try a burn with DVD Decrypter to see if Nero is the problem. Do you have any other burning software on your PC.

Noqoilpi · Feb 6, 2005

10:36:32 AM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Click to expand...

Disc Manufacturer ID: RITEK...
Media type ID: R03
Product revision number: 1
Click to expand...

You should slow to 4x. Burners have favorites when it comes to media. I am 50 in on a 100 spindle of 4x +R R03 myself. When I run them thur DVD ID they come back as 8x. I burned one at 8x with no problems, but I always burn at 4x.

wenospeak · Feb 6, 2005

I've already uninstalled and reinstalled Nero at least 3 times, including a complete registry clean of any entry that included the words "ahead" or "nero".

Maybe I'll try burning at 4x, since I don't have any problem burning Cdr's.

I'll post back.

Thanks again...

wenospeak · Feb 6, 2005

Well,

I tried the exact same burn with the Ritek disc (max speed 4x) and it failed (see next post for log). Without changing any of the data compilation, I inserted at TDK and changed the 8x to 4x and it burnt fine.

Go figure!!!!

Unfortunately, the Ritek disc does not offer me the option of burning at 2x, so I guess I'm throwing them out.

see fail log in next post.

Thanks everyone.

wenospeak · Feb 6, 2005

Ritek 4x burn fail log:

Rick Calic
We No Speak

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <SONY DVD RW DRU-710A> Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-710A >Version: BYX2 - HA 0 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW241040X atapi Port 1 ID 1 DMA: On
DiskPeripheral : PROMISE TECH.I2O RAID D Sptrak Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A D: CDRom0
TDK CDRW241040X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 555MB (568512kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2005
ISO compilation
1:22:50 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

1:22:51 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

1:22:51 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running

1:22:51 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

1:22:52 PM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

1:22:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2223263 (494:03.38, 4342MB)

1:22:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD DVD)

1:22:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR004
Disc Application Code: 64, Disc Physical Code: 193

1:22:52 PM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:22:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2223264 (2223264) = #2223264/494:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2223264 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------

1:22:52 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4553244672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2223264 | lead-out | 1 | 0x41 | 0x00

1:22:52 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

1:22:53 PM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

1:22:53 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

1:22:53 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

1:22:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:22:53 PM #17 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode

1:22:53 PM #18 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

1:22:53 PM #19 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

1:22:53 PM #20 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1:22:53 PM #21 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD-ROM
Book Type setting not supported for the loaded disc type

1:23:46 PM #22 Text 0 File Cdrdrv.cpp, Line 1284
13:23:46.056 - SONY DVD RW DRU-710A\H0 T1 : Queue again later

1:38:55 PM #23 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2223264 (21ECA0h), lenght 0 blocks

1:38:55 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:38:55 PM #25 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 2223263

1:39:22 PM #26 Text 0 File DVDR.cpp, Line 5350
Drive: SONY DVD RW DRU-710A
Book Type request [LO]: DVD+R
Book Type setting not supported for the loaded disc type

1:39:22 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)

1:39:22 PM #28 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

1:40:02 PM #29 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x07 0x01 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:08 PM #30 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x07 0x02 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:19 PM #31 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x07 0x0A 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:19 PM #32 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1793 to 1794

1:40:26 PM #33 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x07 0x0B 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:32 PM #34 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x07 0x0C 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:39 PM #35 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x07 0x0D 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:55 PM #36 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x08 0x60 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:40:55 PM #37 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 1802 to 1805

1:41:02 PM #38 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x08 0x68 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:41:02 PM #39 SectorVerify 21 File Cdrdrv.cpp, Line 9337
Read error at sector 2144

1:41:09 PM #40 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x08 0x69 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:41:15 PM #41 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x08 0x6A 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:41:46 PM #42 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x09 0x51 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:41:46 PM #43 SectorVerify 20 File Cdrdrv.cpp, Line 9337
Read errors from sector 2152 to 2154

1:41:53 PM #44 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x09 0x52 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:41:59 PM #45 SCSI -1128 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0CF40600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x00 0x09 0x53 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05

1:42:01 PM #46 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Log in or Sign up

Nero - extreme buffer fluctuations

wenospeak Member

wenospeak Member

laddyboy Regular member

Jerry746 Senior member

ScubaPete Senior member

Noqoilpi Regular member

ScubaPete Senior member

wenospeak Member

laddyboy Regular member

wenospeak Member

wenospeak Member

wenospeak Member

wenospeak Member

wenospeak Member

laddyboy Regular member

Noqoilpi Regular member

Noqoilpi Regular member

wenospeak Member

wenospeak Member

wenospeak Member

Share This Page

Log in or Sign up

Nero - extreme buffer fluctuations

wenospeak Member

wenospeak Member

laddyboy Regular member

Jerry746 Senior member

ScubaPete Senior member

Noqoilpi Regular member

ScubaPete Senior member

wenospeak Member

laddyboy Regular member

wenospeak Member

wenospeak Member

wenospeak Member

wenospeak Member

wenospeak Member

laddyboy Regular member

Noqoilpi Regular member

Noqoilpi Regular member

wenospeak Member

wenospeak Member

wenospeak Member

Share This Page

Useful Searches