Hi im trying to burn some random files such as pictures, mp3s, videos onto a memorex dvd -r 16x. I just realized after my 5th failure that memorex aint the best brand out there. im using Liteon SOHW-1633S with the latest firmware and Nero express 6 with the latest software. During the verification process itll freeze and if i disable verify after burn, itll burn sucessfully, but when i open it up... it is a blank disc. Any help would be appreciated thx How should i tackle this? Would a different burning program besides Nero solve this? Is it my Liteon problem? should i flash it to another firmware? Or is it just my media? I really hope i can use my memorex since i got 100 of them... Log is here Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 0 TA 1 - 6.3.1.11 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <KJ5052A YFM095I >Version: 1.0 - HA 2 TA 0 - 6.3.1.11 Adapter driver: <abkc4zxc> HA 2 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 0 ID 1 DMA: On CdRomPeripheral : KJ5052A YFM095I 1.0 abkc4zxc Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 KJ5052A YFM095I E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 127MB (130276kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.12.2007 ISO compilation 10:58:23 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:58:23 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 10:58:23 PM #3 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1633S running 10:58:23 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:58:23 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 10:58:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 2228527 (495:13.52, 4352MB) 10:58:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 10:58:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:58:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:58:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2228528 (2228528) = #2228528/495:13.53 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2228528 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 10:58:24 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4564025344, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2228528 | lead-out | 1 | 0x00 | 0x41 10:58:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1836 Caching of files started 10:58:24 PM #13 Text 0 File Burncd.cpp, Line 4206 Cache writing successful. 10:58:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1836 Caching of files completed 10:58:24 PM #15 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 10:58:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:58:24 PM #17 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 13:49,485 (829485ms) -> OK 10:58:24 PM #18 Text 0 File DVDR.cpp, Line 1664 Recording mode: Sequential Recording Mode 10:58:24 PM #19 Text 0 File Mmc.cpp, Line 20125 Set BUFE: supported -> ON , SMART-BURN : ON 10:58:24 PM #20 Text 0 File DVDR.cpp, Line 1805 Start write address at LBA 0 DVD high compatibility mode: Yes 10:58:24 PM #21 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:58:44 PM #22 Text 0 File Cdrdrv.cpp, Line 1293 22:58:44.578 - LITE-ON DVDRW SOHW-1633S\H0 T1 : Queue again later 11:12:21 PM #23 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2228528 (220130h), lenght 0 blocks 11:12:21 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:12:21 PM #25 Text 0 File DVDR.cpp, Line 2015 EndDAO: Last written address was 2228527 11:13:02 PM #26 SCSI -1194 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x04 11:13:02 PM #27 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 11:13:02 PM #28 CDR -1194 File ThreadedTransferInterface.cpp, Line 1701 PMA update failure 11:13:02 PM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1701 Could not perform end of Disc-at-once 11:13:02 PM #30 Text 0 File DVDR.cpp, Line 2015 EndDAO: Last written address was -1 11:13:02 PM #31 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 11:13:02 PM #32 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 11:13:02 PM #33 Phase 38 File dlgbrnst.cpp, Line 1836 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) edit: oops wrong log
oops thats the old log file, i didnt save the new 1 when it happened. but yes wen i use 6.6.1.15 the newest update, i had same prob thx for the reply but still need help
Disc Manufacturer: CMC MA - G. AM3 not sure on these but i dont think there good? i use RITEK GO5 or TY (verbs) also your writing very close to outer edge: Last possible write address on media: 2297887 (510:38.37, 4488MB) Last address to be written: 2228527 (495:13.52, 4352MB) also you dont have much ram left! are you doing other stuff while burning? Physical memory : 511MB (523500kB) Free physical memory: 127MB (130276kB) -------------------- 6.6.1.18 version was the best version, stable
thx for the reply im gonna try using verbatim? heard its the best? Verbatim 16xDVD-R (MCC 03RG20) or Velocity 8xDVD-R (OPTODISCR008) which 1 has more chance of working on my SOHW-1633s? dont care about speed, just want it to work
i would GUESS? at Verbatim 16xDVD-R (MCC 03RG20) my verbs are: Media Information Region information N/A not a DVD-VIDEO Media code/Manufacturer ID TYG03 Format Capacity Blank Disc Free Blocks 411107328 Free Capacity 4.38GB/4.71GB Book Type DVD-R Media Type DVD-R Manufacturer Rated Speed 16.0x 22160KBps Available Write Descriptor CLV 16.0x 22160KBps Available Write Descriptor CLV 12.0x 16620KBps Available Write Descriptor CLV 8.0x 11080KBps Available Write Descriptor CLV 6.0x 8310KBps Write Strategy Speed 4.0x 5540KBps also burn half the rated speed, and dont fully load the dvdr to full capacity. also do nothing while burning, you dont have much ram! reboot pc then do project straight away, more freed up ram spare
