1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero - Illegal Disc / Could not perform start of Disc-at-once

Discussion in 'PS2 - DVD backup discussion' started by Bonzaii, Jun 12, 2007.

  1. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Hello there,
    I've looked all over the forums and couldn't find an answer. I'm using maxell DVD-R to burn. Here is the log (took out serial):

    Michael

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.8.5.0
    Internal Version: 7, 8, 5, 0

    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 0 - 7.8.5.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <GO3846U IOD207J >Version: 1.0 - HA 1 TA 1 - 7.8.5.0
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3100011A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : GO3846U IOD207J 1.0 a9wpnzio Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-1300A D: CDRom0
    GO3846U IOD207J E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 334MB (342304kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.6.2007
    Burn DVD Image
    10:00:49 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    10:00:49 AM #2 Text 0 File Burncd.cpp, Line 3499
    Turn on Disc-At-Once, using DVD media

    10:00:50 AM #3 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2280607 (506:48.07, 4454MB)

    10:00:50 AM #4 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    10:00:50 AM #5 Text 0 File DlgWaitCD.cpp, Line 2949
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
    Disc Manufacturer: Prodis - cF02
    Disc Application Code: 64, Disc Physical Code: 193

    10:00:50 AM #6 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:00:50 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2280608 (2280608) = #2280608/506:48.8
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2280608 blocks [D: _NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    10:00:50 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4670685184, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2280608 | 2280608 | 0x00
    2280608 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    10:00:50 AM #9 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:00:50 AM #10 Text 0 File Burncd.cpp, Line 4278
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    10:00:50 AM #11 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    10:00:50 AM #12 Text 0 File Burncd.cpp, Line 4397
    Cache writing successful.

    10:00:50 AM #13 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    10:00:50 AM #14 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    10:00:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:00:50 AM #16 Text 0 File DVDR.cpp, Line 3192
    Recording mode: Sequential Recording Mode

    10:00:50 AM #17 Text 0 File DVDR.cpp, Line 3348
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:00:50 AM #18 Text 0 File Cdrdrv.cpp, Line 9859
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:00:50 AM #19 SPTI -1046 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 00 00 00 00 00 22 CC A0 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    10:00:50 AM #20 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
    Illegal disc
    D: _NEC DVD_RW ND-1300A

    10:00:50 AM #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
    Could not perform start of Disc-at-once

    10:00:50 AM #22 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 74390400

    10:00:50 AM #23 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 4x (5,540 KB/s)

    10:00:50 AM #24 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    10:00:52 AM #25 Text 0 File Cdrdrv.cpp, Line 11214
    DriveLocker: UnLockVolume completed

    10:00:52 AM #26 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    Thanks in advance!
     
  2. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Bumpity Bump!
     
  3. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Bumper Sticker!
     
  4. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Okay, now I've tried updating my firmware, here is the new log:

    Michael

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.8.5.0
    Internal Version: 7, 8, 5, 0

    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 3 - 7.8.5.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <GO3846U IOD207J >Version: 1.0 - HA 1 TA 1 - 7.8.5.0
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3100011A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : GO3846U IOD207J 1.0 ay4h24to Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD_RW ND-1300A D: CDRom3
    GO3846U IOD207J E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 121MB (124000kB)
    Memory in use : 76 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.6.2007
    UDF/ISO compilation
    7:00:21 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    7:00:21 PM #2 Text 0 File Isodoc.cpp, Line 6608
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    7:00:21 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    7:00:22 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    7:00:22 PM #5 Text 0 File Burncd.cpp, Line 3499
    Turn on Disc-At-Once, using DVD media

    7:00:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 876111 (194:41.36, 1711MB)

    7:00:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    7:00:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 2949
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
    Disc Manufacturer: Prodis - cF02
    Disc Application Code: 64, Disc Physical Code: 193

    7:00:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:00:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 876112 (876112) = #876112/194:41.37
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 876112 blocks [D: _NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    7:00:22 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1794277376, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 876112 | 0 | 0x00
    876112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    7:00:22 PM #12 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    7:00:22 PM #13 Text 0 File Burncd.cpp, Line 4278
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    7:00:22 PM #14 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    7:00:22 PM #15 Text 0 File Burncd.cpp, Line 4397
    Cache writing successful.

    7:00:22 PM #16 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    7:00:22 PM #17 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    7:00:22 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:00:22 PM #19 Text 0 File DVDR.cpp, Line 3192
    Recording mode: Sequential Recording Mode

    7:00:22 PM #20 Text 0 File DVDR.cpp, Line 3348
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:00:22 PM #21 Text 0 File Cdrdrv.cpp, Line 9859
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:00:22 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 179
    CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 00 00 00 00 00 0D 5E 50 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    7:00:22 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
    Illegal disc
    D: _NEC DVD_RW ND-1300A

    7:00:22 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
    Could not perform start of Disc-at-once

    7:00:22 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 74390400

    7:00:22 PM #26 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 4x (5,540 KB/s)

    7:00:22 PM #27 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:00:26 PM #28 Text 0 File Cdrdrv.cpp, Line 11214
    DriveLocker: UnLockVolume completed

    7:00:26 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    I dunno what to do now, I'm totally stuck!
     
  5. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
  6. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Bump?
     
  7. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
  8. Bonzaii

    Bonzaii Member

    Joined:
    Jun 12, 2007
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    I guess I'll have to get new media, thanks for the help. fusk-tards.
     
  9. OmriSama

    OmriSama Regular member

    Joined:
    Apr 6, 2007
    Messages:
    1,154
    Likes Received:
    0
    Trophy Points:
    46
    Dude just because were not helping you dosen't mean that we don't want to. It means that we don't know what's your problem and how to solve them. And you'll probably end up being perma-banned from afterdawn.
     
  10. orthogonl

    orthogonl Regular member

    Joined:
    Nov 20, 2006
    Messages:
    390
    Likes Received:
    0
    Trophy Points:
    26
    We're (largely) volunteers. We take time out of busy lives to answer questions, and at times we're overwhelmed with them. So we filter ruthlessly. In particular, we throw away questions from people who appear to be losers in order to spend our question-answering time more efficiently, on winners.
     
  11. wtfsendit

    wtfsendit Member

    Joined:
    Oct 18, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hi, I'm new to this place as well, and I'm having the same problem.

    I get this Illegal Disc, error along with Could not perform start of Disc-at-once.

    I've updated my firmware, and my DMA is on. I am not sure what else to do. I am using Ritek DVD-R's 16x. (I was able to burn with 8x before w/o any problems) Any help will be greatfull.

    Here is a copy of my log file

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.10.1.0
    Internal Version: 7, 10, 1, 0

    Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.58 - HA 1 TA 4 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SONY DVD-ROM DDU1612 >Version: DYS1 - HA 1 TA 0 - 7.10.1.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD2000JB-00EVA0 atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d344prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SONY DVD-ROM DDU1612 E: CdRom0
    _NEC DVD_RW ND-3500AG F: CdRom4
    Generic DVD-ROM K: CdRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    BUFE : 0
    Physical memory : 2047MB (2096608kB)
    Free physical memory: 1541MB (1578460kB)
    Memory in use : 24 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.10.2007
    ISO compilation
    5:26:55 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    5:26:55 AM #2 Text 0 File Isodoc.cpp, Line 6666
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    5:26:56 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    5:26:56 AM #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    5:26:56 AM #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 1722831 (382:51.06, 3364MB)

    5:26:56 AM #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    5:26:56 AM #7 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    Disc Application Code: 64, Disc Physical Code: 193

    5:26:56 AM #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:26:56 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1722832 (1722832) = #1722832/382:51.7
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1722832 blocks [F: _NEC DVD_RW ND-3500AG]
    --------------------------------------------------------------

    5:26:57 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [F: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3528359936, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 1722832 | 0 | 0x00
    1722832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    5:26:57 AM #11 Text 0 File SCSIPTICommands.cpp, Line 215
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

    5:26:57 AM #12 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

    5:26:57 AM #13 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    5:26:57 AM #14 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    5:26:57 AM #15 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    5:26:57 AM #16 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    5:26:57 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:26:57 AM #18 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode for Multisession

    5:26:57 AM #19 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:26:57 AM #20 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: 6.0
    Revision number of minimum recording speed: -
    Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
    Class: 0
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:26:57 AM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 179
    CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 00 00 00 00 00 1A 49 D0 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    5:26:57 AM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
    Illegal disc
    F: _NEC DVD_RW ND-3500AG

    5:26:57 AM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
    Could not perform start of Disc-at-once

    5:26:57 AM #24 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 83836800

    5:26:57 AM #25 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 4x (5,540 KB/s)

    5:26:57 AM #26 Text 0 File SCSIPTICommands.cpp, Line 261
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    5:27:00 AM #27 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    5:27:00 AM #28 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     

Share This Page