I am a rookie looking to back up my personal dvd's. I bought an external drive, and Nero OEM Suite. After I fished shrinking with dvd shrik it still says that my dvd+r does not have enough room. Is there a simpler program that does all the shrinking an copying, or is my Nero and older verson. I am looking for any help that a smarter person can give me so I can begin. Or let me know the exact proccess and software that someone is using that will work good. thanks
Try editing the final size of the DVD in shrink. You can do this by opening up Shrink and then click the Edit option at the top then click on prefrences in the pull down menu. When the window opens you should see the area that says Target size. If you havent changed this then it probaly says DVD5. Click the drop down menu where it says DVD5 and then scroll to custom. You will see the window beside custom now apear the number reads 4464 change the number to 4300. This will bring the final size down on the movie and give a little room for miss caculations DVD shrink might make on size. Plus it will help with the final copy so it dosent get to the edges of the disk where the dye could be defected which could give you a bad burn. Most people have it set at 4300 so try that run DVDShrink again and then try burrning. It should work
hi i use default dvd5 size... try outputing your shrunk film to burn with dvd decrypter, set this in shrink! and not use nero! see if the same file burns ok?
I tried shrinking and then using the decrypter, but when I try and get the source to write from off of my drive, it say that the file can not be found. Any hints or tips? thanks
This is what I get when I try to burn using the burner drive with Nero? I use dvdecryper, then dvdshrink to the nero burn? -0218-0370-1725-8155-4331* Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1/30/2005 9:07:35 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero API version: 6.3.1.11 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <GENERIC DVD RW 8XMax> Version: 130I - HA 2 TA 0 - 6.3.1.11 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : ST94019A atapi Port 0 ID 0 DMA: On CdRomPeripheral : SAMSUNG CDRW/DVD SN-324F atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SAMSUNG CDRW/DVD SN-324F D: CDRom0 GENERIC DVD RW 8XMax E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 446MB (457200kB) Free physical memory: 132MB (135544kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.2.2005 NeroAPI 10:08:50 PM #1 Phase 112 File APIProgress.cpp, Line 269 DVD-Video files reallocation started 10:08:51 PM #2 Phase 114 File APIProgress.cpp, Line 269 DVD-Video files reallocation completed (no file modified) 10:08:51 PM #3 Phase 111 File APIProgress.cpp, Line 269 DVD-Video files sorted 10:08:51 PM #4 Text 0 File Reader.cpp, Line 118 Reader running 10:08:51 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:08:51 PM #6 Text 0 File Writer.cpp, Line 124 Writer GENERIC DVD RW 8XMax running 10:08:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:08:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:08:52 PM #9 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-At-Once, using DVD media 10:08:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2047359 (454:58.09, 3998MB) 10:08:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 10:08:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: GENERIC DVD RW 8XMax, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:08:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:08:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2047360 (2047360) = #2047360/454:58.10 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2047360 blocks [GENERIC DVD RW 8XMax ] -------------------------------------------------------------- 10:08:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [GENERIC DVD RW 8XMax ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4192993280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2047360 | lead-out | 1 | 0x00 | 0x41 10:08:53 PM #16 Phase 24 File APIProgress.cpp, Line 269 Caching of files started 10:08:53 PM #17 Text 0 File Burncd.cpp, Line 4206 Cache writing successful. 10:08:53 PM #18 Phase 25 File APIProgress.cpp, Line 269 Caching of files completed 10:08:53 PM #19 Phase 36 File APIProgress.cpp, Line 269 Burn process started at 8x (11,080 KB/s) 10:08:53 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:08:54 PM #21 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:08:54 PM #22 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 10:49:18 PM #23 SCSI -1039 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x08B80000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x0A 0x23 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x09 0x01 10:49:18 PM #24 CDR -1039 File Writer.cpp, Line 304 Focus or tracking error 10:49:18 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:49:18 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:59:19 PM #27 SCSI -1169 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 11:03:19 PM #28 CDR -1175 File Cdrdrv.cpp, Line 1245 Internal trace Resending of command failed after 240000ms CDB Data[hex]: 5B 01 06 00 00 00 00 00 00 00 00 00 11:03:19 PM #29 SCSI -1169 File Cdrdrv.cpp, Line 1246 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 11:13:20 PM #30 SCSI -1169 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 11:13:20 PM #31 CDR -1169 File WriterStatus.cpp, Line 164 Logical unit not ready, operation in progress 11:13:20 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 11:13:51 PM #33 CDR -1175 File Cdrdrv.cpp, Line 1245 Internal trace Resending of command failed after 30000ms CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00 00 00 11:13:51 PM #34 SCSI -1169 File Cdrdrv.cpp, Line 1246 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x072722A8 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 11:13:51 PM #35 CDR -1169 File WriterStatus.cpp, Line 169 Logical unit not ready, operation in progress 11:13:51 PM #36 TRANSFER -39 File WriterStatus.cpp, Line 169 Could not perform EndSession 11:14:21 PM #37 Phase 38 File APIProgress.cpp, Line 269 Burn process failed at 8x (11,080 KB/s) 11:14:22 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 11:14:22 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. 11:14:52 PM #40 SCSI -1169 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 11:15:22 PM #41 SCSI -1169 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 11:15:53 PM #42 SCSI -1169 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x07 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x07 Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.17 , size=24698 bytes, created 7/17/2003 1:19:56 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 1/30/2005 9:07:35 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Recorder: <GENERIC DVD RW 8XMax> Version: 130I - HA 2 TA 0 - 6.3.1.11 Adapter driver: <> HA 2 Drive buffer : 2048kB [bold]Bus Type : default (0) -> ATAPI, detected: ? [/bold] something wrong there!!! also is your drive called GENERIC ??? could be aspi layer or via4in1 drivers? but i would try burn with dvd decrypoter, set it in shrink to burn with that...
I tried to burn with decrypter and if failed again at 30 percent. It said something about "device failed in CDB" What does that mean, and do I need a better burner? I will take any advice you can give me. Which of these two would you recomend buying if I were to bet a new burner drive, and with what software, the EXTERNAL USB 2.0 + PIONEER DVR-109 16X DVD BURNER DUAL or the NEC DUAL LAYER 16X DVD±R/RW USB 2.0 EXTERNAL DL-BURNER. thanks
i also have my dvd burner drive plugged into a usb drive that is not high speed, the message says that it will go slower, but I am wondering if it affects the success of the burn. How do i get a HISPEED usb device instaled or put in and is it worth it? thanks
