Can any1 help have been using nero for a year or so now all of a sudden when i go to burn dvd it either fails right at the start or runs really slow taking 30 min to burn dvd rather than 14min. have taken it of re-loaded it ok for 1 dvd then goes slow again. this is the log when it fails at the start. Please help no hair left to pull out !!!! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 14:49:52 Nero version: 6.3.0.0 Recorder: <FREECOM_ DVD+/-RW4B> Version: 1.30 - HA 1 TA 1 - 6.3.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.00 - HA 1 TA 0 - 6.3.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340015A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: On CdRomPeripheral : FREECOM_ DVD+/-RW4B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4320 D: CDRom0 FREECOM_ DVD+/-RW4B E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1021MB (1046512kB) Free physical memory: 643MB (659004kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.2.2005 UDF/ISO compilation 07:17:34 #1 Phase 112 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation started 07:17:35 #2 Phase 114 File dlgbrnst.cpp, Line 1800 DVD-Video files reallocation completed (no file modified) 07:17:35 #3 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 07:17:35 #4 Phase 111 File dlgbrnst.cpp, Line 1800 DVD-Video files sorted 07:17:36 #5 Text 0 File Reader.cpp, Line 118 Reader running 07:17:36 #6 Text 0 File Writer.cpp, Line 124 Writer FREECOM_ DVD+/-RW4B running 07:17:36 #7 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 07:17:36 #8 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 07:17:36 #9 Text 0 File Burncd.cpp, Line 3094 Turn on Disc-at-once, using DVD media 07:17:36 #10 Text 0 File DlgWaitCD.cpp, Line 239 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 1974831 (438:51.06) 07:17:36 #11 Text 0 File DlgWaitCD.cpp, Line 244 Write in overburning mode: FALSE 07:17:36 #12 Text 0 File DlgWaitCD.cpp, Line 2068 Recorder: FREECOM_ DVD+/-RW4B, Media type: DVD-R Disc Manufacturer: RITEKG - 04 Disc Application Code: 64, Disc Physical Code: 193 07:17:36 #13 Text 0 File DlgWaitCD.cpp, Line 405 >>> Protocol of DlgWaitCD activities: <<< ========================================= 07:17:36 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1974832 (1974832) = #1974832/438:51.7 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1974832 blocks [FREECOM_ DVD+/-RW4B ] -------------------------------------------------------------- 07:17:36 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [FREECOM_ DVD+/-RW4B ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4044455936, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1974832 | lead-out | 1 | 0x00 | 0x41 07:17:36 #16 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 07:17:36 #17 Text 0 File Burncd.cpp, Line 4061 Cache writing successful. 07:17:36 #18 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 07:17:36 #19 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 07:17:36 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 07:17:36 #21 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 12:17,898 (737898ms) -> OK 07:17:36 #22 Text 0 File DVDR.cpp, Line 1424 Recording mode: Sequential Recording Mode 07:17:36 #23 Text 0 File Mmc.cpp, Line 19397 Set BUFE: supported -> ON 07:17:36 #24 Text 0 File DVDR.cpp, Line 1539 Start write address at LBA 0 DVD high compatibility mode: Yes 07:17:36 #25 Text 0 File Cdrdrv.cpp, Line 7912 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 07:18:01 #26 SCSI -1106 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03500000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 07:18:01 #27 CDR -1106 File Writer.cpp, Line 301 Power calibration error 07:18:01 #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:18:01 #29 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 07:18:01 #30 Text 0 File DVDR.cpp, Line 1743 EndDAO: Last written address was -1 07:18:01 #31 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 07:18:01 #32 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 07:18:01 #33 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46 File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Now ain't that a mouthfull......... try this http://www.hairobics.fsworld.co.uk/firmware.zip - update firmware along with 'hiding all' microsoft services :
Thanks for the help, but im new to this stuff down loaded the firmware link, opened it - it then show both my drives with just an exit buttom on the bottom what do i do here?? sorry for being daft !! any help will be great
I assume if the firmware DIDNT show update, of any kind, you do nothing. You'r updated, Honestly, I haven't tried updating my firmware, it's absolutely brand new, got that shiny new cabin cruzer smell, still attached to it. But, hiding all, really helps.