1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Vision Express 2 Can't Burn DVD

Discussion in 'Nero discussion' started by ems46, Jan 15, 2007.

  1. ems46

    ems46 Member

    Joined:
    Jan 15, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Hey guys, hope you're all well.

    Like everyone else in this forum i'm having major dvd burning issues!

    I've tried burning (downloaded) .avi films to make a DVD movie using Maxell DVD+Rs but this lead to a 2 hour encoding process ending with an error message about not enough disk space.

    So i converted the .avi file into .vob using Super Video Converter, everything seemed to work fine and the DVD seemed to be burnt but when I tried it in my DVD player it was blank even though there's a burn mark on the disk, the problem can't be with my player as I have previously played DVD+Rs in it. After failing to have any success with .avi or .vob burning I tried burning an mpeg2 file, but again I received the disk space error.

    I'm really confused about what's going on, as I've previously burnt some DVDs using the software which came installed on my PC (Sonic Digital Media Plus v7), but after some successful burns this software stopped working, so I downloaded an update which told me it had to delete the previous version, which it did successfully but now the new version doesn't work either.

    So i've tried a few versions of Nero all with no success, and I've tried DVD Santa which encounters an error each time I tried to open it, downloading this program from different sites hasn't helped!

    I'm really sorry about the long post, I hope someone can help me and any help will be extremely gratefully received!!

    Here's an error log from NeroVision if that's any use:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56
    ahead WinASPI: File 'C:\Program Files\ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06
    Nero API version: 6.3.0.2
    Using interface version: 6.0.0.29
    Installed in: C:\Program Files\ahead\NeroVision\NeroFiles\
    Application: ahead\NeroVision
    Recorder: <TSSTcorp CD/DVDW TS-H552D>Version: HP06 - HA 2 TA 0 - 6.3.0.2
    Adapter driver: <atapi> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder

    === Scsi-Device-Map ===
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552D atapi Port 2 ID 0 DMA: On
    DiskPeripheral : ST380011A atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H552 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 446MB (457200kB)
    Free physical memory: 129MB (132148kB)
    Memory in use : 71 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.1.2007
    NeroAPI
    23:38:13 #1 Phase 111 File APIProgress.cpp, Line 253
    DVD-Video files sorted

    23:38:13 #2 Text 0 File Reader.cpp, Line 118
    Reader running

    23:38:13 #3 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    23:38:13 #4 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    23:38:13 #5 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-At-Once, using DVD media

    00:25:15 #6 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    00:25:15 #7 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: TSSTcorp CD/DVDW TS-H552D;
    CD type reading failed
    ATIP Data: ?

    00:25:15 #8 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Not enough free discspace.
    (Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Dual Layer.)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 01:03:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Thanks for taking the time to read my post!!
     
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Hi ems46
    Use version 6.6.0.18 of Nero. Here are the links to download:
    Package 1.
    Package 2 (recode, vision)

    How much free space do you have on the hard drive?

    Run a disc defrag and use a registry cleaner like the free ccleaner. Use the issues and cleaner options.

    You may need a firmware update too - may help with the discs. Is this a HP pc? If it is you'll need to check their site and see if one is available.

    For the Maxell's if they are made in Japan they good stuff. If not may be iffy.
    Other ones to use Verbatim or made in Japan Sony or Fuji.

    Try burning these files with ImgBurn.
    You'll use the build mode for non iso files.

    Give those a go and let us know.
     
  3. ems46

    ems46 Member

    Joined:
    Jan 15, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Thank you so much for your help binkie7.

    I've currently got around 5gb of free space on my hard drive, it should be loads more but as you can imagine having 70 .avi files is stealing most of the space!

    My PC is a Compaq so i'll go to their site and see about firmware updates.

    I'll try all your suggestions and let you know.

    Thanks again!
     
  4. ems46

    ems46 Member

    Joined:
    Jan 15, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Just a quick update.

    I deleted Nero Vision Express and ran the Nero clean tool, then installed the version you suggested but it won't allow me to burn .avi files, do I need to convert my file to .vob again?
    The last time i did that it left me with one large file that burnt onto disk but wouldn't play in a DVD player!

    ImgBurn worked but it burnt the .avi as a file rather than as a DVD film to play in a DVD player.
     
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Getting pretty close there on the hard drive space left.
    Some avi's converted can take up to 4.3 gig - so Nero needs at least that and a little more to store temporarily while converting them.

    Yeah those avi's are sure taking up space ;)

    Do you no longer have Vision to convert these after you updated Nero?

    To just burn avi's you can use express and do a data disc but this will only be playable if the player will play avi/divx. Sounds like yours doesn't. Same reason the one you burnt w/ ImgBurn won't play needs to be converted 1st.
     
  6. ems46

    ems46 Member

    Joined:
    Jan 15, 2007
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    Hey, just letting you know that after clearing some hard drive space and installing Nero Vision Express 3 I can now successfully burn DVDs.

    Thanks for all your help!
     
  7. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Not a problem :)

    Glad to hear you are happily burning again.
     
  8. Ercix

    Ercix Member

    Joined:
    Jan 27, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    HI ! PLEASE Help me ! I have Nero vision Express 3 and I need convert a avi file to DVD but when Iam trying to lay my avi fail nero shows me : Cannot insert ...avi. fail ! Wgat Im doing wrong! I have tried many programms to convert avi to DVD but they all didnt work. With one programm it worked but when Im lookin it in my ps2 how can play DVD fails the movie scrambles. WHY ??? Help me please Im despered
     
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Hey Ercix
    What programs worked for you? Sounds like it mightbe a NTSC vs PAL format problem on why it plays scrambled.

    Have you tried playing the avi 1st and see if all is okay there?

    If your not using version 6.6.0.18 see my post above on links to download that version.
     
  10. Ercix

    Ercix Member

    Joined:
    Jan 27, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    The only programm tht worked was ConvertXtoDVD . And yes I played the Avi. at first on my computer and there was all O.K And I am using Nero 6.6.0.1. Exemple for TMPGEnc and VirtualDub is the same problem I can not Lay n the avi. fail and I can not understand why. I have readed many posits about converting avi to DVD . I have readed that for other people all is o.k. they can lay in the avi. fail. THats my biggest problem why I can not convert. Movie scramble I think because the programm ConvertXtoDVD is not so good and converting by the charapters the movie scrambles.
     
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Ok - ConvertX is a pretty good program - the scrambling may be due to the file being in the wrong format - like PAL format and your in a NTSC region. In the TV format section of ConvertX change the setting from automatic to the format your in - PAL or NTSC.

    Update Nero too - use version 6.6.0.18. Here's links:
    Package 1
    Package 2 (recode, vision)
     
  12. Ercix

    Ercix Member

    Joined:
    Jan 27, 2007
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    O.K I will try it ! But I dont know ntsc or pal take. I live in Europe (Latvia) ! I hope you are write about NTSC and PAL if not I dont now what to do ! THNX
     
  13. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Hopefully that's it - you should be in the PAL region so set ConvertX to that.

    Update Nero to and see if that does the trick.
     
  14. potolover

    potolover Member

    Joined:
    Feb 11, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    hi ive been trying to make dvds out of avi files i downloaded and just downloaded TMPGEnc and it scrambled the movie. could u please help me.

    THX
     
  15. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Hi potolover
    No experience w/ TMPGEnc myself so can't help too much there.

    Do you have Nero - Vision specially.

    You can use that to transcode - if it was a different format problem (maybe due to the scrambled picture you describe) would alert with a popup saying something like 'mostly in pal format - do you want to keep this format' (or vice versa) click no and Nero will convert to your regions format.
     
  16. potolover

    potolover Member

    Joined:
    Feb 11, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I downloaded Nero Vision but it only has cd making not dvd so idk wat to do anymore. can u please give a step by step of how to convert avi or mpeg files to dvd please it would be a lot of help.

    THX
     
  17. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Ok - here's a free way.
    Here's a guide by bbmayo - link

    And you can get all the software used at this link.

    Give that a go and see if it does the trick.
     
  18. s206417

    s206417 Member

    Joined:
    Jan 27, 2007
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    I have been working with the .vob files for the first time and I created the VIDEO_TS folder with all of the file put into it. I opened Nero and dragged the folder into content box and it gives me this message:

    One or more VOB files that contain multiple segments can be imported as a single video if their video properties match.
    Do you want to merge VOB segments into a single video if possible? (If you click No, each segment will be treated as an individual video.)

    Should I click Yes or No?
     
  19. scratch45

    scratch45 Guest

    you can leave them as different menus on the startup screen or you can combine them which will make fewer menu screens when the dvd starts.
     

Share This Page