I have this software as part of a bundle with Lite-On DRW-1673S burning I just purchased. 1st time, burn appeared to go ok, but when disk is "read" correctly as "DVD" by my home DVD player all I get is the Blue Screen. Cannot play it. Any idea what I'm doing wrong here? TIA!
Hi. Post your Nero History log back to this thread. Be sure to omit your name and serial number from the log. The log can be found in one of these locations: Nero 6: Program Files > Ahead > Nero > NeroHistory Nero 7: Program Files > Nero > Nero7 > Core > NeroHistory Some suggestions of things to always keep in mind: - don't burn at maximum speed. Limit your speed to half or less the rated speed of the media for good quality burns. - use good quality media like Verbatim, Taiyo Yuden, and Made in Japan labeled Sony and Fuji. - keep your burner firmware up to date. - don't multitask while burning. shutdown unnecessary programs.
Here we go. I have Maxell DVD-RW, but looking in the file attached, I see the name RITEK! Haven't seen a good word on this forum re: RITEK! That may be the root of the problem - anyways, please see log and comment - thanks! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero API version: 6.6.0.13 Using interface version: 6.6.0.8 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\NeroVision Internal Version: 6, 6, 0, 13c Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0C - HA 2 TA 0 - 6.6.0.13 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8163B D: CDRom0 HL-DT-ST CD-RW GCE-8483B E: CDRom1 LITE-ON DVDRW SOHW-1673S F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 509MB (522224kB) Free physical memory: 139MB (142788kB) Memory in use : 72 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.4.2007 NeroAPI 4:19:13 PM #1 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 4:19:13 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 4:19:13 PM #3 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1673S running 4:19:13 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 4:19:14 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 4:19:14 PM #6 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 4:21:54 PM #7 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 237311 ( 52:44.11, 463MB) 4:21:54 PM #8 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 4:21:54 PM #9 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+RW Disc Manufacturer ID: RITEK, Media Type ID: 004, Product revision number: 48 Disc Application Code: 0, Extended Information Indicators: 1 4:21:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= This disc is not empty. (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) Accessing disc... (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.) 4:21:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 237312 (237312) = #237312/52:44.12 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 237312 blocks [LITE-ON DVDRW SOHW-1673S] -------------------------------------------------------------- 4:21:54 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 486014976, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 237312 | lead-out | 1 | 0x41 | 0x00 4:21:55 PM #13 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 4:21:55 PM #14 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 4:21:55 PM #15 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 4:21:55 PM #16 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 4:21:55 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:21:55 PM #18 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 6FFFF h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: RITEK... Media type ID: 004 Product revision number: 48 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 52 49 54 45 4B - 00 00 00 30 30 34 30 39 ...RITEK...00409 23 00 9C 81 5C 02 28 00 - 96 8A 70 02 28 00 9C 81 #...\.(...p.(... 68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(............. 4:21:55 PM #19 Text 0 File DVDPlusRW.cpp, Line 652 Start write address at LBA 0 DVD high compatibility mode: Yes 4:23:25 PM #20 Text 0 File WriterStatus.cpp, Line 116 <LITE-ON DVDRW SOHW-1673S> start writing Lead-Out at LBA 237312 (39F00h), lenght 0 blocks 4:23:25 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:23:26 PM #22 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/12/2004 9:55:45 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 3/27/2007 3:55:31 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
Update your firmware here: http://forum.rpc1.org/dl_firmware.php?download_id=2026 Also, do not use rewritable dvds to put make dvd format video. Go buy some Taiyo Yudens or Verbatims.
Thanks very much! Any preferred part # on the Verbatims? I do a Goodle search and see a whole bunch of different model numbers! Or can you recommend a retailer in the Northeast USA that would carry 'em?
You can use RW media if you want. It's just that it isn't designed for long-term archival use. Best Buy, Circuit City, Walmart, etc., everyone carries Verbatim. There is one type of -R Verbatim media that's a little wonky. All the other +R -R seems OK. You have Nero InCD installed which is often a troublemaker. Use the Nero InCD Clean Tool to get rid of it: http://www.nero.com/nero6/eng/InCD_Clean_Tool.html For the future you might want to consider updating your Nero to version 6.6.0.18, the most stable version of Nero 6. Do you have a full version of Nero or an OEM version that came with your burner?
Thanks! I ran the InCD cleaner (acted a little whacky after the "Are you sure you want to remove InCD, etc.)but I guess it worked. This is the bundled OEM that came with my Lite-On burner. I'll check Nero website for the version you mentioned - again, many thanks!
