nokia dbox 1

Hi Mgb
Thanks for the speedy response
I checked it from the engineers menu on mine it was frequency 131.000
and Symbol 6.952
i put them in as 1310 and 06952 not sure whether that is ight and every now and hen they keep returning back to the old ones that were in so not sure whether they need saving or how to i press ok then menu after editing them

Any ideas mate

 

Try a search in the tuner menu.

 

I did try that mate too and it came back with error no signal mate not sure whats wron cos my virgin and net is sweet

 

Any more ideas mgb at all i used the chatterbox tool bar to check the area codes too do i need anysort of cam or card to recieve the fta stuff?

 

The scan has no affiliation to any cam or card.
You should try the dvb frequency from the engineer menu. There are 2 frequencies. The other one is for the cable modem.

 

Still no luck mgb the frequency i used i aslo checked on a file from chatterbox tool bar wichc said that this code was right for my area so not sure what to do next mate any thoughts
Cheers
Rob

 

If you get no channels from the scan the frequency is simply wrong for your cable feed.
Try frequencies from neighbour areas.
The signal could also be to strong or too weak.

 

Hi all
I have been given a dbox with ATmega163 by a mate, I have read everything I could find about them so I bought a infinity usb read/writer and managed to get it up and running, the problem I have is I only have 15 or so channels some free some subed tvX etc all working fine, I need to know wich hex file to use for my area to get all the availabe channels. I used humax_6_in_one_eeprom_funcard_file_hex dated 23/08/2008.
Is this the correct one for widnes cheshire or dose anybody know wich one I should use?
Any help would be great

 

Do you have a problem with the channel scan or a problem with scrambled channels?
The scan procedure has no affiliation to any card.