1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Now what (fat psp at 1.5 slim at 3.6)

Discussion in 'Sony PSP - Homebrew software' started by Jstud757, Oct 16, 2007.

  1. Jstud757

    Jstud757 Guest

    i finally finished the pandora crap and my fat psp is at 1.5 but now what? what do i do to put homebrew on my slim????
     
  2. drakex

    drakex Regular member

    Joined:
    May 19, 2007
    Messages:
    893
    Likes Received:
    0
    Trophy Points:
    26
    upgrade to custom firmware... and for slim, you should NOT be on 1.50 I guess you messed up somewhere, anyways upgrade to 3.40 OEA, 3.71 M33-2 and make sure your SLIM is not at 1.50, I never heard of that!
     
  3. cee43ja1

    cee43ja1 Regular member

    Joined:
    Sep 14, 2007
    Messages:
    4,135
    Likes Received:
    1
    Trophy Points:
    46
    the slim won't even go to 1.50. the lowest is 3.60.

    you'll need to create the universal unbricker v3 on your fat to put custom firmware on the slim. go HERE for instructions.
     
  4. larrylje

    larrylje Active member

    Joined:
    Jan 4, 2005
    Messages:
    12,506
    Likes Received:
    0
    Trophy Points:
    96
    You can't create the Universal unbricker with a 1.50 firmware PSP. You need 2.XX kernel or higher to run the Despertar_Cementerio aplication.

    So I would recomend going HERE to install 3.52 M33-4 on your 1.50 FAT. Then go HERE and create the Universal Unbricker/Upgrader to install 3.71 M33-2 on your SLIM PSP (1.50 ADD ON-2 is for FAT PSP only so don't try instaling it on your SLIM).
     
    Last edited: Oct 16, 2007
  5. Jstud757

    Jstud757 Guest

    hey whoa whoa whoa i never said my slim was 1.5 i meant my fat psp was at 1.5 and my slim is at 3.6 my bad for the confusion
     
  6. larrylje

    larrylje Active member

    Joined:
    Jan 4, 2005
    Messages:
    12,506
    Likes Received:
    0
    Trophy Points:
    96
    @Jstud757

    The easiest way would be doing what i said to do. Update your 1.50 FAT to 3.52 M33-4 then create the Universal Unbricker/Upgrader to install the 3.71 M33-2 custom firmware on your SLIM.

    If you use the 1.50 FAT as is you will need to create a normal Pandora Battery. Then Modify the Magic Memory Stick with 3.60 M33 custom firmware. Install that on your slim. Then run the 3.71 M33 update then run the 3.71 M33-2 update to get your PSP SLIM to 3.71 M33-2 custom firmware.
     
    Last edited: Oct 16, 2007

Share This Page