1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

PLEASE HELP ME WITH CDR BACKUP

Discussion in 'PS2' started by freshpl, May 12, 2003.

  1. freshpl

    freshpl Member

    Joined:
    May 12, 2003
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    I recently purchased Marvel vs capcom 2 and its already all scratched up I'm trying to make a backup. I did cdrwin patched it and burned it. I use Gameshard V2 with the gameshark memory thing that came with it. I also did the swap BUT IT SAYS PLEASE INSERT A PS2 FORMAT DISC???? WHAT AM I DOING WRONG COULD THE GAME BE DVD? THE BACKING IS SILVER PLEASE HELP!!!!
     
  2. freshpl

    freshpl Member

    Joined:
    May 12, 2003
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    For “extract mode” select disk image/ cue sheet
    For “read options” select “raw”
    For “error recovery” select “abort”
    For “jitter correction” select “auto”
    For “subcode analysis” select “auto”
    Data Speed and Audio Speed should be the same
    For “read retry count” type 0
    For “subcode threshold” type 300


    Are these the correct setting for cdrwin?

    And do I close the session on the FIREBURNER???
     
  3. freshpl

    freshpl Member

    Joined:
    May 12, 2003
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    Some of the games said illegal track encountered Please help
     
  4. freshpl

    freshpl Member

    Joined:
    May 12, 2003
    Messages:
    21
    Likes Received:
    0
    Trophy Points:
    11
    1) insert game into cd drive.
    2) Open up CDRWIN and click on the extract disk/tracks/sectors button.
    3) Your settings should be as follows:
    For “extract mode” select disk image/ cue sheet
    For “read options” select “raw”
    For “error recovery” select “abort”
    For “jitter correction” select “auto”
    For “subcode analysis” select “auto”
    Data Speed and Audio Speed should be the same
    For “read retry count” type 0
    For “subcode threshold” type 300
    Make sure you selected the drive that your PS2 game is in
    Make sure you typed in the file name (just type the name of the game) and
    Check the directory that you’re putting your file in.
    Then just press “start”



    If you get an error in the middle of reading the disk that says something like “can’t read sections xxxx-xxxxx of disk”, it is becase the disk is scratched and CDRWIN can’t read it. Try to clean the disk, if that doesn’t work you just have to use a different game (a different copy of the same game)


    4) Once CDRWIN is done, click ok and then exit CDRWIN. Open up the
    PS2 patcher, select the game file you just created and patch it (make
    sure you select the “RAW” option.
    4) Close the PS2 patcher, next open up Fireburner. Click on the visual
    cue burner button. When you created your .bin file (the game file) in
    CDRWIN, a .cue file should have automaticly been created. In that
    case, drag and drop the .cue file into the Fireburner window. If the
    .cue file was not created, just drag and drop the .bin file into the
    Fireburner window. After you have done that, right click (click with
    the right side button on your mouse) on your file in the Fireburner
    window, and select “Burn/Test burn”.
    5) In the options window that appears, select your cdwriter, select your
    write speed(doesn’t really matter), and make sure you select “Track at
    once (TOA) for the recording method. As for the options on the right side of the options window, make sure only the following are checked:
    “eject cd” and “close session”. When you have selected the options, click ok and your PS2 game will burn. That’s all you have to do to burn a game.



    Burning a Playstion (PSone) game

    1) If you want, you can spend 5 minutes using the same method as above
    to burn your playstation game, but its not necessary. For a playstation game (not PS2) all you need to do is use a program that lets you make an “exact copy” or a “backup disk (CDRWIN)” You don’t need any selected options, you just need to start the game on the PS2 the same way you would a PS2 game.




    Starting the game on you PS2

    1) Now for the fun part (and challenging part the first couple of times)
    This may sound a little complicated at first, but after you do it 3 or 4
    times, it’s supper easy. First things first, you must remove the front of your game drive on your PS2(not a big deal, it can snap on and off).
    2) Now insert your gameshark 2 cd(make sure the gameshark memory
    card is in one of the 2 slots, doesn’t matter which one.)
    3) In the gameshark options, choose “start game”, then “without”. Your screen should read “Please insert game disk then press X to continue.”
    4) Now this part can be trickey for beginners, so I will provide pictures
    -the main purpose of this starting method is to open up the PS2 and
    swap the gameshark disk with your burned game without the PS2
    knowing you did it. DO NOT press the eject button on the PS2!!!
    -with the PS2 cd tray cover removed, you will be able to look in and see a while tab inside the PS2. With a credit card (or something like it) gently slide the white tab all the way over to the right, if you did it correctly, this should allow you to manually pull open the PS2 cd tray.
    5) Next, take the gameshark disk out of the PS2 and put in your burned
    game.
    5) Gently push the PS2 cd tray fully back into the PS2 (Don’t press the
    eject button).
    6) Now you need to slide that white tab all the way back to the left (its
    origional position). To do this you get a strong papper clip(needs to be a strong one) stick it into the PS2 on the right side of the white tab and push the tab back to the left.
    7) If you pushed the tab all the way back to the left and did every thing
    else right, you are ready to play your game. Just press X on your PS2 controler and watch as your burned game loads. ( It may load slower than an original game, depending on the cd-r you are using, I use Verbatim cd-r’s and have no problems.)


    ARE THE CODES CORRECT FOR CDRWIN CORRECT??? I HAVE SEEN DIFFERENT ONES. DOES ANYONE HAVE A THREAD FOR COPYING DVD GAMES TO CDR BY REPLACING THEM WITH DUMMY FILES?
     
  5. darthnip

    darthnip Moderator Staff Member

    Joined:
    Jan 9, 2003
    Messages:
    2,894
    Likes Received:
    0
    Trophy Points:
    66
    if the back of the disc is silver, it's a dvd. the cdr based games are blueish purple. there's no need to patch it at all, just do a simple 1:1 copy.
     

Share This Page