1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Please Help with burning DVD+R and DVD-R with Nero

Discussion in 'DVDR' started by EllyHuhle, Jan 8, 2008.

  1. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    I have Driver HL-DT-ST DVDRRW GWA-4164B
    On my Nero Program the following Recorders show up:
    Image Recorder (DVD)
    Image Recorder CD-R/RW
    HL-DT-ST DVD RRW GWA 4164B DVD
    HL-DT-ST DVD RRW GWA 4164B CR-R/RW

    I can not make a Data DVD, either DVD+R or DVD-R.
    I am able to make a CD-R or CD-R/W.

    I was told that DVD's have a greater capacity and have bought many DVD+R and DVD-R to find out that they do not work.

    When I burn these DVD's with Nero Express I get a window asking to insert the disc to be written on: Disk Requirements: DVD+R/RW, DVD-R/RW, DVD+R9, Double Layer.
    When I insertet a DVR+R the burn session failed at 16.620KB's.
    When I put a DVR-R in the CD-ROM the shute opens to eject the disk.
     
  2. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Go to one of these locations and find your Nero history log, post it so we can take a look

    Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt

    Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory

    VISTA: …. Desktop/Your Comp Name/App Data/Roaming/Ahead/Nero History
     
  3. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
     
  4. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    Gwendolin, I am sorry I am trying hard here, but not sure how I can reply, hope this is correct.
    You instructed me to go to my Programm Files and I only have All Programs.Under All Programs I have Nero Program, Back-Up, CD-DVD Speed, Cover Des., Nero Drive Speed, Nero Express, Nero Information. I do not see anything about History.
    Elly
     
  5. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Which version of Nero are you using.

    BTW: I am logging off for a few hours, hopefully someone will come along and help, good luck.
     
    Last edited: Jan 8, 2008
  6. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
     
  7. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    I found the Nero History Log now, however it is many pages long and I do not know how to forward to you. Can you please advise.
    Thanks Elly
     
    Last edited: Jan 8, 2008
  8. 7thsinger

    7thsinger Regular member

    Joined:
    Oct 17, 2007
    Messages:
    3,605
    Likes Received:
    2
    Trophy Points:
    48
    Do what Gwendolin suggested and try to post a log on here and we'll see if we can help you.
     
  9. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    I found the history log but I do not know how to post the log here. I looked for the Help on your Forum but can not find it. Can you please advise me how I can get the history to you. Thank you and I apologize for being so uninformed.
    Elly
     
  10. 7thsinger

    7thsinger Regular member

    Joined:
    Oct 17, 2007
    Messages:
    3,605
    Likes Received:
    2
    Trophy Points:
    48
    Last edited: Jan 8, 2008
  11. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    Attached is the Nero History Log. Hope you can help me!
    Thankful for ever
    Elly


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 124MB (127016kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.1.2008
    ISO compilation
    12:07:19 AM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:07:19 AM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    12:07:19 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:07:19 AM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    12:08:57 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
    Aborted by user

    12:08:57 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    12:08:57 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B
    Medium not present

    12:08:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 123MB (126384kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.1.2008
    ISO compilation
    12:10:40 AM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:10:40 AM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    12:10:40 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:10:40 AM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    12:10:47 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
    Aborted by user

    12:10:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    12:10:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B
    Medium not present

    12:10:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 187MB (191756kB)
    Memory in use : 51 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.1.2008
    ISO compilation
    12:46:25 AM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:46:25 AM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    12:46:25 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:46:25 AM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    12:47:01 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
    Aborted by user

    12:47:01 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    12:47:01 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B
    Medium not present

    12:47:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 144MB (147896kB)
    Memory in use : 62 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.1.2008
    ISO compilation
    1:50:13 AM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    1:50:13 AM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    1:50:13 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    1:50:13 AM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    1:50:28 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
    Aborted by user

    1:50:28 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    1:50:28 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B
    Medium not present

    1:50:28 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 89MB (91480kB)
    Memory in use : 76 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.1.2008
    ISO compilation
    4:22:56 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:22:56 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    4:22:56 PM #3 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRRW GWA-4164B running

    4:22:56 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:22:57 PM #5 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    4:22:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 66799 ( 14:50.49, 130MB)

    4:22:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    4:22:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
    Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    4:22:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:22:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 66800 (66800) = #66800/14:50.50
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66800 blocks [HL-DT-ST DVDRRW GWA-4164B]
    --------------------------------------------------------------

    4:24:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 136806400, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    66800 | lead-out | 1 | 0x00 | 0x41

    4:24:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    4:24:20 PM #13 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    4:24:20 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    4:24:20 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 16x (22,160 KB/s)

    4:24:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:24:21 PM #17 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: R05
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
    23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    4:24:21 PM #18 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:17,867 (17867ms) -> OK

    4:24:21 PM #19 Text 0 File DVDPlusRW.cpp, Line 613
    Start write address at LBA 0
    DVD high compatibility mode: No

    4:25:38 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x094C0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x80

    4:25:38 PM #21 CDR -1135 File Writer.cpp, Line 304
    Write error

    4:25:38 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    4:25:38 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    4:25:39 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    4:25:39 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    4:25:39 PM #26 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 16x (22,160 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 144MB (147856kB)
    Memory in use : 62 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.1.2008
    ISO compilation
    4:40:46 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:40:46 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    4:40:46 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:40:46 PM #4 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    4:40:46 PM #5 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 66799 ( 14:50.49, 130MB)

    4:40:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    4:40:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
    Disc Manufacturer ID: , Media Type ID: , Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 0

    4:40:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:40:46 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 66800 (66800) = #66800/14:50.50
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66800 blocks [HL-DT-ST DVDRRW GWA-4164B]
    --------------------------------------------------------------


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 11
    Drive is autodetected - recorder class: DVD+R9 DL recorder
    CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GWA-4164 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 128MB (131328kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.1.2008
    ISO compilation
    4:44:36 PM #1 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:44:36 PM #2 Text 0 File Reader.cpp, Line 118
    Reader running

    4:44:36 PM #3 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRRW GWA-4164B running

    4:44:36 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    4:44:36 PM #5 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    4:44:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 15295 ( 3:23.70, 29MB)

    4:44:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    4:44:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
    Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 7

    4:44:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    4:44:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 15296 (15296) = #15296/3:23.71
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 15296 blocks [HL-DT-ST DVDRRW GWA-4164B]
    --------------------------------------------------------------

    4:45:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 31326208, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    15296 | lead-out | 1 | 0x00 | 0x41

    4:45:08 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    4:45:09 PM #13 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    4:45:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    4:45:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 12x (16,620 KB/s)

    4:45:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:45:09 PM #17 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MBIPG101
    Media type ID: R05
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
    23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    4:45:09 PM #18 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:15,959 (15959ms) -> OK

    4:45:09 PM #19 Text 0 File DVDPlusRW.cpp, Line 613
    Start write address at LBA 0
    DVD high compatibility mode: No

    4:46:50 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09320000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x80

    4:46:50 PM #21 CDR -1135 File Writer.cpp, Line 304
    Write error

    4:46:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    4:46:50 PM #23 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    4:46:50 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    4:46:50 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 12x (16,620 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Owner



    Windows XP 5.1
     
    Last edited: Jan 8, 2008
  12. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Your version of Nero is really old, try to update to this version

    6.6.1.15

    http://www.filehippo.com/download/7717bb2aa35a8a6b405b8322e5dfe50b/download/

    DMA needs to be on, heres a guide to turn back on

    http://forums.afterdawn.com/thread_view.cfm/260038

    These arent good quality discs, try Verbatim or Sony (made in Japan)

    You will also need to update your firmware from here

    http://support.fujitsu-siemens.com/...wareGUID=CB38A987-26EA-45FB-9791-82B279E0A39F

    Slow your burn to 4 speed








     
  13. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    2,380
    Likes Received:
    0
    Trophy Points:
    46
    Not to intrude, but memory seems low.
    Edit out your serial number before someone cuts and pastes it into their own computer, or posts it on one of the serial number sites.
    There are numerous times it shows up in your log, (at least 6) Use the find function of your browser to get each instance, search for 1A20 and edit them out.
     
    Last edited: Jan 8, 2008
  14. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    Thank you so much. I will follow your advice but need some more explanation.
    1. I will update to version 6.6.1.15 with the link you have provided

    2. How do I turn the CdRomPeripheral: HL-DT-ST DVDRRW GWA 4164B atap Port 4 DMA: Off? Where do I find it?

    3. Where do I find the DMA to turn off?

    4. Quote: Disc. Manufacturer ID:MBIPG101, Media Type ID: RO5, Product revision number:1 Are these the disks I have used and I should use Verbatim or Sony (made in Japan) in future?

    Quote: Recorder:<HL-DT-ST DVDRRW GWA-4164> Version:1.03 What do you mean by that?

    5. I will update the firmware from the link provided by you.

    6. What do you mean by slow your burn to 4 speed? Is that after I done the update etc. and how do I do that?

    Gwendolin, also in what order should I do those suggested things? Should I do them in the order you listed them?

    Thank you again for your prompt reply.
    Elly
     
  15. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    The discs to use in future are verbatim or sony

    Just click on this link to update your firmware

    http://support.fujitsu-siemens.com/Downl...91-82B279E0A39F (link 1)

    This link will show you how to turn your DMA on (at present it is off)

    http://forums.afterdawn.com/thread_view.cfm/260038 (link 2)

    You are burning your DVDs at 16 speed....slow the burn speed to 4

    So basically all you have to do is
    1. Update your firmware from the above link 1
    2. Turn on your DMA from the other link 2 provided
    3. Reduce your burn speed to 4
     
    Last edited: Jan 8, 2008
  16. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    Thank you again.
    I did not realize that I only have to click on the links. I have now downloaded the firmware from fuijitsu-siemens (link 1) and received a window with 2 files/folders in the temporary file, which in the meantime I can not find. Do you think the firmware installed? I did not save it I ran it.
    I also have opened the link from "Alkohol" but it seems the first picture does not show. There is a red X for the first picture.
    Gwendolin, how do I reduce the burn speed to 4?
    I also looked at the update to version 6.6.1.15 and it says: Nero is a flexible, reliable, and easy-to-use application designed to write both data and CD audio to CD-R and CD-RW discs. It supports ISO 9660 image... more info...
    Would this update allow me to burn my Data and Pictures on a DVD+ and DVD+RW? Above it only mentions CD's?
    You people are extremley helpful and I appreciate your help and consideration. Thank you Gwendolin.
     
  17. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Yes this version will allow you to burn both DVDs and CDs....it's a little hard to describe how to reduce your burn speed as it depends on which particular application of Nero you are using....heres a pic ...but I am using Nero 7 and the application is NeroVision

    [​IMG]
     
  18. EllyHuhle

    EllyHuhle Member

    Joined:
    Jan 8, 2008
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    11
    Thank you. Can I change the speed after I download the updates to Nero 6.6.1.15.
    I used Alkohols Guide re: DMA needs to be off and have discovered that I have 3 of each Primary IDE Channel and Secondary DE Channel. Should I uninstall 2 of them each. Actually one of them in the Seconday catergory has PIO Mode and needs to be uninstalled, I think, anyway.

    I downloaded the firmware but do not know if it is in effect. How can I verify? I think I am getting paranoid now. All I know is, after the download I got a screen up Tem;. Folder with 2 files, and I am not sure if I should have installed from there. Can you please explain to me what I should do.
    Elly
     
  19. Rotary

    Rotary Senior member

    Joined:
    Apr 10, 2003
    Messages:
    8,353
    Likes Received:
    0
    Trophy Points:
    116
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 15295 ( 3:23.70, 29MB)

    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 66799 ( 14:50.49, 130MB)

    3 and 14 minutes of video to dvdr? you have many logs

    uninstall all device controllers then and reboot pc, then check dma

    is this a made up pc built by you? or untouched shop bought one?

    cant see any files locations? like c:\movie files\matrix.avi - bla bla
     
    Last edited: Jan 9, 2008
  20. blivetNC

    blivetNC Regular member

    Joined:
    Nov 8, 2005
    Messages:
    2,380
    Likes Received:
    0
    Trophy Points:
    46
    I just saw your post in my shoutbox, sorry don't look there much,
    As far as physical memory goes, this is the amount of memory in your system, Nero recommends at least 512 Mbytes for burning, if you are multitasking, (I.E. surfing the net, having other programs open etc.) while you are burning this will also eat up a lot of your free memory.

    two options,
    1. buy more memory, I suggest Newegg.com
    or
    2. don't multitask and close down any open programs that aren't necessary to run your computer, disconnect from the net, turn off your anti virus and spyware programs, (only after disconnected from the net) Use Windows Task Manager to shut down unneeded programs. This should help out a bit.
     

Share This Page