up till like a week ago i had no problems burning/copying DVDs. now nero says the burn is created sucessfully but when i go to put movie in my dvd player it says unknown disc 90% of the time. i just burned alpha dog and went to copy it and this is the error log. 1C82-0000-19E5-MAAX-4009-4639-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BPSA - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <IDE-DVD ROM 6116 >Version: HD22 - HA 1 TA 1 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 0 ID 0 DMA: On CdRomPeripheral : IDE-DVD ROM 6116 atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : FC9951V TAL838Z 1.0 awnjib02 Port 3 ID 0 DMA: Off === CDRom-Device-Map === FC9951V TAL838Z E: CdRom2 LITE-ON DVDRW SOHW-1633S F: CdRom0 IDE-DVD ROM 6116 G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte BUFE : 0 Physical memory : 503MB (515372kB) Free physical memory: 239MB (245348kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.6.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 1:42:33 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:42:34 PM #2 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 1:42:34 PM #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 672 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) S01 T02 Con 0x14 Start 672 Len 64 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) S01 T03 Con 0x14 Start 736 Len 804864 NWA 805599 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 1 Mode TRM_DATA_MODE1 (0) 1:42:35 PM #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 3 allowed to copy 1: 0 - 672 = 672, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 2: 672 - 736 = 64, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3: 736 - 805600 = 804864, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 1:42:35 PM #5 Text 0 File Burncd.cpp, Line 3508 Turn on Track-At-Once, using DVD-R/RW media 1:42:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2621439 (582:32.39, 5119MB) Last address to be written: 805599 (179:01.24, 1573MB) 1:42:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 1:42:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:42:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 672 (672) = #672/0:8.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 672 blocks [Image Recorder] 1: TRM_DATA_MODE1 (2 - Data (mode 1)) 2 indices, index0 (0) not provided original disc pos #672 + 64 (64) = #736/0:9.61 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 64 blocks [Image Recorder] 2: TRM_DATA_MODE1 (3 - Data (mode 1)) 2 indices, index0 (0) not provided original disc pos #736 + 804864 (804864) = #805600/179:1.25 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 804863 blocks [Image Recorder] -------------------------------------------------------------- 1:42:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 3: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1376256, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 1376256 1376256 1507328, ISRC "" 3: TRM_DATA_MODE1, 2048/0x00, FilePos 1507328 1507328 1649868800, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 672 | 672 | 0x00 672 | 2 | 0 | 0x41 | 0 | 0 | 0x00 672 | 2 | 1 | 0x41 | 64 | 736 | 0x00 736 | 3 | 0 | 0x41 | 0 | 0 | 0x04 [open track] 736 | 3 | 1 | 0x41 | 804864 | 805599 | 0x04 [open track] 805600 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 1:42:35 PM #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 1:42:35 PM #12 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 1:42:35 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:42:35 PM #14 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 1:42:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #672): write at #672 1:42:37 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #736): write at #736 1:47:09 PM #17 Phase 121 File dlgbrnst.cpp, Line 1762 Creating Image completed successfully 1:47:11 PM #18 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:47:16 PM #19 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:47:16 PM #20 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 1:47:18 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:47:19 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as TAO. MTYP: Mediumtype = DVD-R/RW (0x6) Image file name: <C:\Documents and Settings\HP_Owner\Desktop\TempImage.nrg> 1:47:20 PM #3 Text 0 File Burncd.cpp, Line 3508 Turn on Track-At-Once, using DVD-R/RW media 1:50:06 PM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 805599 (179:01.24, 1573MB) 1:50:06 PM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 1:50:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: Prodis - cF02 Disc Application Code: 64, Disc Physical Code: 193 1:50:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.) 1:50:06 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 672 (672) = #672/0:8.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 656 blocks [F: LITE-ON DVDRW SOHW-1633S] 1: TRM_DATA_MODE1 (2 - DVD-ROM) 2 indices, index0 (0) not provided original disc pos #672 + 64 (64) = #736/0:9.61 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48 blocks [F: LITE-ON DVDRW SOHW-1633S] 2: TRM_DATA_MODE1 (3 - DVD-ROM) 2 indices, index0 (0) not provided original disc pos #736 + 804864 (804864) = #805600/179:1.25 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 804863 blocks [F: LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 1:50:06 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [F: LITE-ON DVDRW SOHW-1633S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 3: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1376256, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 1376256 1376256 1507328, ISRC "" 3: TRM_DATA_MODE1, 2048/0x00, FilePos 1507328 1507328 1649868800, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 672 | 672 | 0x00 672 | 2 | 0 | 0x41 | 0 | 0 | 0x00 672 | 2 | 1 | 0x41 | 64 | 736 | 0x00 736 | 3 | 0 | 0x41 | 0 | 0 | 0x04 [open track] 736 | 3 | 1 | 0x41 | 804864 | 805599 | 0x04 [open track] 805600 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 1:50:06 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 16 run-out blocks from end of track 1. Length: 672 -> 656. 1:50:06 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 16 run-out blocks from end of track 2. Length: 64 -> 48. 1:50:06 PM #12 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 1:50:06 PM #13 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 1:50:06 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 1:50:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:50:06 PM #16 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode for Multisession 1:50:06 PM #17 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: No 1:50:06 PM #18 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:50:06 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 73340800 1:50:55 PM #20 Text 0 File DVDMinusRW.cpp, Line 588 EndTrack 1: Last written address was 655 1:50:55 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #672): write at #672 1:50:55 PM #22 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode for Multisession 1:50:55 PM #23 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 672 DVD high compatibility mode: No 1:50:55 PM #24 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:53:20 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 1:53:59 PM #26 SPTI -1080 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A Buffer x0629e040: Len x20 1:53:59 PM #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 2092 Write error F: LITE-ON DVDRW SOHW-1633S 1:53:59 PM #28 TRANSFER -18 File ThreadedTransferInterface.cpp, Line 2092 Could not perform EndTrack 1:53:59 PM #29 SPTI -1080 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 1:53:59 PM #30 CDR -1080 File WriterStatus.cpp, Line 245 Disc not present F: LITE-ON DVDRW SOHW-1633S 1:53:59 PM #31 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 1:53:59 PM #32 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 1:53:59 PM #33 SPTI -1080 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 1:53:59 PM #34 CDR -1080 File WriterStatus.cpp, Line 245 Disc not present F: LITE-ON DVDRW SOHW-1633S 1:53:59 PM #35 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 1:53:59 PM #36 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11,080 KB/s) 1:53:59 PM #37 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:54:00 PM #38 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 1:54:00 PM #39 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Here's a couple of suggestions; Try crossflashing this drive to 'offical' LiteOn firmware. Looks like this is an oem drive. Use BSOY - patched crossflashing from here. Switch the media to Taiyo Yuden, Verbatim or made in Japan Sony, Fuji or Maxell. The discs you're using now are made by Prodisc and can be so-so.